PREV 11 April, 2022 NEXT

Latest News & White Papers this Week

11 April, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 11 April, 2022
 
Sponsored by Planar Monolithics Industries
 
 
Latest News this Week
Marki Microwave Introduces Line of Miniature GaAs MMIC Equalizers and Attenuators - Marki Microwave
RFHIC Introduces the World's First C-Band Power Amplifier Module for 5G Massive MIMO Systems - RFHIC
Anritsu and MVG Introduce 6 GHz Wi-Fi 6E OTA Measurement Solution - Anritsu
NXP’s Premium Radar Software Development Kit Enhances Automotive Radar Sensor Capabilities - NXP Semiconductors
Farran Introduces mmWave 5G Communication Extender from 24.5 to 52.6 GHz - Farran
APITech Develops X-Band Quad Transmit/Receive Module for AESA/E-Scan Radar Applications - APITech
HENSOLDT Enhances its Air Defense Radar Systems with New IFF Capabilities - HENSOLDT
US Naval Research Laboratory 3D Prints Antennas and Amplifiers that Operate in Very High Frequency Bands - US Naval Research Lab
Arralis Starts of Production of its Ka-Band Downlink Satellite Transceiver - Arralis
SAG Introduces NFC Molding Tag and RFID+NFC Dual Frequency Smart Label - SAG
KYOCERA AVX Introduces Interactive Tool to Help Optimize Placement of Antennas in Compact IoT Modules - KYOCERA AVX
More News
New White Papers & Articles
Overcoming RF Signal Generation Challenges in Quantum Computing with New DAC Technologies - Tektronix, Inc.
Automotive Electronics Clock Tree Design Considerations - Skyworks Solutions
COTS Software Defined Radio for 5G Development - Pentek
What is Behind the Drive Towards Terahertz Technology of 6G - Anritsu
Analyzing RF Radar Pulses with an Oscilloscope - Rohde & Schwarz
More Whitepapers
Upcoming Event
Event Image
PCB EAST 2022
Date: 11 to 13 April, 2022
Location: Marlborough, MA
More Events
Sponsored by Planar Monolithics Industries
 
 
Featured Products this Week
RF Transistor
100 W GaN HEMT from 13.75 to 14.5 GHz
RF Transistor  from Mitsubishi Electric US, Inc.

The MGFK50G3745 from Mitsubishi Electric is a GaN High-electron-mobility transistor (HEMT) that operates from 13.75 to 14.5 GHz. It delivers an output power of 100 W (50 dBm) with a power gain of 10 dB and has a power-added efficiency (PAE) of 30%. This transistor requires a DC supply of 24 V and draws 2.4 A of current.
Download Datasheet Product Details
RF Amplifier
9-Channel Low-Noise Cryogenic Amplifier from 6 to 8 GHz
RF Amplifier  from AmpliTech

The APTCQ-06000800-2K00-9CMD1 from AmpliTech is a 9-Channel Cryogenic Low-Noise Amplifier that operates from 6 to 8 GHz. It provides a gain of 39 dB per channel with a noise figure of 0.6 dB and has a P1dB of 0 dBm. This 9-channel LNA provides significant space and power compared to conventional single Qubit LNAs by providing 9 LNAs in one package, with higher gain and lower NF.
Download Datasheet Product Details
RF Amplifier
200 W CW/Pulsed Solid-State Power Amplifier from 0.7 to 10 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2073BDB-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 700 MHz to 6 GHz (Band A) and 6 to 10 GHz (Band B). It delivers a CW/Pulsed saturated output power of more than 200 W in Band A and 100 W in Band B with a power gain of 50 dB. It is equipped with built-in protection circuits and has extensive monitoring for forward/reflected power in Watts & dBm, VSWR, voltage, current and temperature.
Download Datasheet Product Details
Tunable Filter
5 W Tunable Filter from 30 to 520 MHz
Tunable Filter  from Pole/Zero

The ERF-5W™ from Pole/zero is a Tunable Filter that operates from 30 to 520 MHz. It can handle an in-band average input power of 5 W and has an insertion loss of less than 3.5 dB. The tunability of this filter is accomplished by the use of three poles of selectivity, multiple internal tunable filters along with high-performance PIN diode RF band select switches.
Download Datasheet Product Details
OCXO
100 MHz Radiation Hardened OCXO for Space Applications
OCXO  from AXTAL

The AXIOM6060 from AXTAL is a Radiation Hardened OCXO that operates at a frequency of 100 MHz. It produces a sine wave signal with an output power of +13 dBm and has a phase noise of -165 dBc/Hz. This OCXO has high-frequency stability of up to ±200 ppb and requires a warm-up time of 20 minutes. It has spurious levels of -80 dBc and harmonics of -35 dBc.
Download Datasheet Product Details
Power Divider
2-Way Power Divider from 0.5 to 2 GHz
Power Divider  from Planar Monolithics Industries

The APD-2-500M2G-SFF-30W from Planar Monolithic Industries is a 2-Way Power Divider/Combiner that operates from 0.5 to 2 GHz. This divider can handle a forward input power of up to 30 W and a reverse input power of 1 W. It has an insertion loss of less than 0.5 dB, provides more than 20 dB of isolation, and has a VSWR of less than 1.25:1.
Download Datasheet Product Details
RF Amplifier
Power Amplifier from 18 to 45 GHz for 5G/SATCOM Applications
RF Amplifier  from Mini Circuits

The ZVE-453G+ from Mini Circuits is an RF Power Amplifier that operates from 18 to 45 GHz. It delivers a saturated output power of 28 dBm (~ 0.63 W) with more than 34 dB of gain. This amplifier includes safety features such as protection against DC transients, over-voltage, and reverse voltage conditions to provide protection against mishandling.
Download Datasheet Product Details
Sponsored by Planar Monolithics Industries
 
 
Down Converter
Three-Band Downconverter from 40 to 70 GHz
Down Converter  from Norden Millimeter

The NDC4070I0218N17 from Norden Millimeter is a Three-Band Downconverter with RF frequencies from 40 to 50 GHz (Band 1), 50 to 60 GHz (Band 2), and 60 to 70 GHz (Band 3). It has corresponding IF frequencies from 7.6 to 17.6 GHz (Band 1), 4 to 14 GHz (Band 2), and 2.4 to 12.4 GHz (Band 3). This downconverter has sequential band operation with a band switch time of 250 uSec.
Download Datasheet Product Details
RF Test Set
5G-NR C-V2X Test Solution with GNSS Emulation
RF Test Set  from Keysight Technologies

The SA8700A C-V2X Test Solution from Keysight is a comprehensive test solution enabling functional, protocol, and RF measurements of C-V2X devices. It is based on Keysight’s new UXM 5G platform, with support for future releases of 5G NR C-V2X, and the MXG for GNSS emulation.
Download Datasheet Product Details
GNSS Module
GNSS Module with Untethered and Automotive Dead Reckoning
GNSS Module  from u-blox AG

The NEO-M9V from u-Blox is an M9 Standard Precision GNSS Module with support for Untethered Dead Reckoning (UDR) and Automotive Dead Reckoning Technology (ADR). UDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. The module includes various dynamic models for after-market vehicles, motorcycles, and micro-mobility applications.
Download Datasheet Product Details
Diplexer
SAW Diplexer for GPS L1/L2 Bands
Diplexer  from Qorvo

The QPQ1063 from Qorvo is a GPS SAW Diplexer that operates from 1559.92 to 1590.92 MHz (L1) and 1212.1 to 1243.1 MHz (L2). It is designed for the rejection of unwanted GPS signals and has a bandwidth of 21 MHz for each band with an insertion loss of less than 2.1 dB. This diplexer can handle an RF input power of up to +33 dBm and provides isolation of 58 dB between bands.
Download Datasheet Product Details
Cellular IoT Module
LTE-A Cat 12 Module for M2M and IoT Applications
Cellular IoT Module  from Quectel

The EM12-G from Quectel is an LTE Advanced Category 12 Module designed specifically for M2M and IoT applications. It delivers a downlink data rate of up to 600 Mbps and an uplink data rate of up to 150 Mbps. This module supports DL 3x carrier aggregation and 256QAM and is compatible with Quectel’s Cat6 module EM06 and future Cat 16 module EM16.
Download Datasheet Product Details
RF Test Set
Integrated Non-Signaling Solution for 5G mmWave RF Parametric Testing
RF Test Set  from Rohde & Schwarz

The R&S®CMP200 from Rohde & Schwarz is an IF Tester that combines the functions of a vector signal analyzer and an Arbitrary Waveform Generator. The compact integrated solution can be customized with up to three R&S®CMPHEAD30 remote radio heads (RRH), for up/down-converting signals to 5G FR2 frequencies.
Download Datasheet Product Details
RF Cable
110 GHz Phase Stable Test Cable
RF Cable  from Withwave

The WT110 from Withwave is a Phase Stable Test Cable that operates up to 110 GHz. It is impedance matched at 50 ohms and has a VSWR of less than 1.4:1. The cable provides phase stability of ±9.5 degrees and amplitude stability of ±0.2 dB. It has an attenuation of 10 dB/m and has propagation velocity at 80%.
Download Datasheet Product Details
Laminate
FR-4 Process Compatible Low-loss Laminate Material
Laminate  from Isola Group

The I-TERA MT40 from Isola Group is a Low-Loss Laminate Material, suitable for many high-speed digital and RF/microwave printed circuit designs. This material has a dielectric constant (Dk) of 3.38 to 3.75 which is stable between -40°C and 140°C up to W-band frequencies (75 to 110 GHz). The I-TERA materials have a transition temperature (Tg) of 200 degrees Celsius.
Download Datasheet Product Details
DRO
8 GHz Dielectric Resonator Oscillator (DRO)
DRO  from Synergy Microwave Corporation

The DRO80 from Synergy Microwave Corporation is a Dielectric Resonator Oscillator (DRO) that operates at 8 GHz. It delivers an output power of more than 8 dBm with a phase noise of -160 dBc/Hz @ 1 MHz offset. The DRO requires a DC tuning voltage from 1 to 15 V and has a tuning sensitivity of 0.25 MHz/V. It requires a DC bias voltage from 7 to 10 V and consumes less than 70 mA of current.
Download Datasheet Product Details
RF Amplifier
E-Band MMIC Driver Amplifier from 71 to 76 GHz
RF Amplifier  from VIPER RF

The VRF250DV7 - BD from Viper RF is an E-Band GaAs MMIC Driver Amplifier that operates from 71 to 76 GHz. The amplifier delivers a saturated output power of 17 dBm and a small signal gain of 17 dB. The RF ports are DC blocked and matched to 50 ohms. This amplifier can be used in point to point communication applications and is available as a die that measures 2.82 x 1 x 0.05 mm.
Download Datasheet Product Details
Analog Phase Shifter
90° Voltage Controlled Phase Shifter from 2 to 5 GHz
Analog Phase Shifter  from Amcom Communications

The AM2050PM-VVP from AMCOM Communications is a Voltage Controlled Phase Shifter that operates from 2 to 5 GHz. It provides a phase shift of 90° and has an insertion loss of less than 1.5 dB. The phase shifter has a control voltage from 0 to 25 V. It has small insertion loss variations over different phase shifts and is a fully matched connectorized module.
Download Datasheet Product Details
RF Switch
75-Ohm SPST Absorptive RF Switch from 1 to 3500 MHz
RF Switch  from Renesas

The F2911 from Renesas is an SPST Absorptive RF Switch that operates from 1 to 3500 MHz. This 75-ohm switch has an insertion loss of 0.9 dB, a switching time of 1 µs, and provides 53 dB of isolation. It requires a single DC supply from 2.7 to 5.5 V and consumes less than 230 µA of current. The switch is available in an 8-pin DFN package that measures 2 x 2 mm.
Download Datasheet Product Details
RF Amplifier
1000 W Pulsed GaN Power Amplifier from 5.2 to 5.9 GHz
RF Amplifier  from Diamond Microwave

The DM-C1K0-01 from Diamond Microwave is a C-band Pulsed GaN High Power Amplifier that operates from 5.2 to 5.9 GHz. It provides a peak pulsed output power of more than 1000 W. This HPA has a pulse width of up to 100 µs and a duty cycle of up to 15% with a rise/fall time of 50 ns. It is ideal for a range of radar applications, enabling customers to use compact and reliable wideband SSPA technology instead of bulkyTWT amplifiers.
Download Datasheet Product Details
Base Station Antenna
3-Port Sector Antenna from 5.1 to 5.9 GHz
Base Station Antenna  from ITELITE

The PRO-SEC-L5016-3X3 from ITELITE is a 3-Port Sector antenna that operates from 5.1 to 5.9 GHz. This antenna has three polarizations and provides a gain of 16 dBi per port. It has a horizontal beamwidth of 90° and a vertical beamwidth of 12°. This IP66-rated antenna provides easy elevation and tilt adjustment with a shielded radio compartment and special outdoor weatherproof enclosure to ensure environmental protection.
Download Datasheet Product Details
Microwave Backhaul Radio Links
866 Mbps Wireless Point-to-Point Bridge from 5.9 to 6.4 GHz
Microwave Backhaul Radio Links  from Ligowave

The LigoPTP RapidFire from LigoWave is an Outdoor Wireless Point-to-Point Bridge that operates from 5.9 to 6.4 GHz. It provides a data rate of up to 866 Mbps, has Tx power of 30 dBm and has Rx sensitivity of -97 dBm. It has a 1.2 GHz CPU dedicated to data processing and delivers up to 200,000 packets per second.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, upcoming events, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]