1. everything RF
  2. RF Newsletters
more
PREV 13 April, 2022 NEXT

New RF and Microwave Products this Week

13 April, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 13 April, 2022
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week
Signal Generator
Non-PLL Based RF Signal Generator from 10 MHz to 3 GHz
Signal Generator  from Boonton

The SGX1003 from Boonton is an RF Signal Generator that operates from 10 MHz to 3.072 GHz. It has an output power range from -50 to +18 dBm and a switching speed of 200 µs. The generator has a phase noise of -116 dBc/Hz at 6 GHz (10 kHz offset) and a jitter of less than 100 fs. It utilizes a unique non-PLL (phase-locked loop) design with a digital front-end and direct, proprietary back end.
Download Datasheet Product Details
Band Pass Filter
5G Band Pass Filter with Passband from 27.825 to 28.025 GHz
Band Pass Filter  from Wainwright Instruments

The WBEX5-27625-27825-28025-28225-30CC from Wainwright Instruments is a Band Pass Filter with a passband from 27825 to 28025 MHz. It can handle an input power of up to 10 W, has a passband insertion loss of less than 3.5 dB, and provides a stopband attenuation of more than 30 dB. It is suitable for use in 5G NR uplink & downlink Band n261 applications.
Download Datasheet Product Details
RF Transceiver
5G mmWave Up/Down Converter from 24.5 to 65 GHz
RF Transceiver  from Farran

The FCE-V-TR-0001 from Farran is an up/down converter that can be used as a frequency extender for testing 5G Applications from 24.5 to 52.6 GHz. It is a unique, dedicated Transmit/Receive system for 5G, compliant with the most recent 3GPP release 17 millimeter-wave frequency range. It upconverts an input IF frequency of 6 GHz to 24.25-52.6 GHz and can down-convert an input RF frequency from 57-65 GHz to 6 GHz.
Download Datasheet Product Details
Beamforming IC
RFIC and Antenna Module for Licensed 5G mmWave Bands from 24.5 to 29.5 GHz
Beamforming IC  from Sivers Semiconductors

The BFM02801 from Sivers Semiconductors is an RFIC and Antenna Module that operates from 24.25 to 29.5 GHz covering all licensed 5G mmWave bands. It consists of integrated T/R-switches, low noise amplifiers, antenna array, high-performance synthesizer, and programmable baseband filters. The module delivers Tx power of up to +45 dBm and supports electronic beam steering of ±45° (azimuth and elevation).
Download Datasheet Product Details
RF Amplifier
1 W MMIC Power Amplifier from 18 to 44 GHz
RF Amplifier  from Analog Devices

The ADPA7005 from Analog Devices is an MMIC Power Amplifier that operates from 18 to 44 GHz. It delivers a saturated output power of more than 1 W (32 dBm) with a gain of 14.5 dB and has a power-added efficiency (PAE) of 11%. The amplifier requires a DC supply of 5 V, consumes 1.4 A of current, and has an integrated temperature-compensated, on-chip power detector.
Download Datasheet Product Details
RF Amplifier
Broadband RF Amplifier from 10 MHz to 50 GHz
RF Amplifier  from AT Microwave

The AT-BB-0050-3820C from AT Microwave is an RF Amplifier that operates from 10 MHz to 50 GHz. It delivers 22 dBm of saturated power with more than 32 dB of gain. The amplifier requires a DC supply of 12 V and consumes less than 450 mA of current. It can be used both as a power amplifier and a low noise amplifier (LNA).
Download Datasheet Product Details
Sponsored by Mouser
Mini Circuits
ZVA Series Wideband Amplifiers
Mini-Circuits ZVA Series Wideband Amplifiers are coaxial, medium power, high-frequency, and high gain amplifiers that offer over and reverse voltage DC protection. Click here to learn more.
RF Module
2.4/5 GHz 2x2 Wi-Fi 5 (802.11ac) + Bluetooth® 5.1 Combo Chip
RF Module  from Infineon Technologies

The AIROC™ CYW54591 from Infineon is a 2x2 Dual-band Wi-Fi 5 (802.11ac) + Bluetooth® 5.1 Combo Chip that operates in 2.4 and 5 GHz bands. It supports two concurrent data streams. In IEEE 802.11ac mode it supports up to 256 QAM with 20 MHz, 40 MHz, and 80 MHz channels for data rates up to 867 Mbps. It has an internal PA and LNA with support for external ones as well.
Download Datasheet Product Details
Antenna
Surface-Mount 4G, LTE Cellular Antenna from 698 to 2690 MHz
Antenna  from Antenova

The Pharaoh SR4L073 from Antenova is a 4G, LTE Cellular Antenna that operates from 698 to 2690 MHz. This linearly polarized antenna provides a peak gain of 2.9 dBi with an average efficiency of 80% and has a VSWR of less than 3.8:1. It is available in a surface-mount package that measures 37.0 x 13.0 x 3.3 mm and is suitable for very small PCBs.
Download Datasheet Product Details
Time and Frequency Standard
Low-Cost High-Performance GPS/GNSS Rubidium Reference Source
Time and Frequency Standard  from Orolia

The Spectratime GNSSource-2500 from Orolia is a low-cost, high-performance primary GPS/GNSS rubidium reference source with 8 x 10 MHz / 8 x 1PPS or 16 x 10 MHz output frequency options. It is designed for cross-industry applications, where high stability and timekeeping features are required. This unit integrates a smart, low-noise Rubidium LNRClok-1500 and a GPS/GNSS receiver.
Download Datasheet Product Details
Rubidium Oscillator
10 MHz Highly-Stable Programmable Rubidium Frequency Standard
Rubidium Oscillator  from Morion US

The RFS-M102 from Morion US is a Low-Cost Programmable Rubidium Frequency Standard that operates at 10 MHz. It provides Sine (default) and LVCMOS output signal waveforms with a phase noise of -120 dBc/Hz @ 100 Hz offset. This oscillator has 1 PPS input/output by default with multiple user options (1PPS output pin is user-programmable).
Download Datasheet Product Details
RF Amplifier
250 W Multi-Purpose Solid-State Power Amplifier from 1 to 6 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 250S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a saturated output power of more than 250 W with a small-signal gain of 61 dB. The amplifier has a Class A design, making it suitable for EMC test applications where continued operation into high VSWR loads including open and short circuits is required.
Download Datasheet Product Details
RF Amplifier
100 W TWT Replacement Solid State Power Amplifier from 6 to 18 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2033LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers a saturated output power of more than 100 W with a power gain of over 50 dB. This amplifier has been designed for replacing aging TWT technology. It has built-in protection circuits with optional monitoring parameters for Forward/Reflected power, VSWR, voltage, current & temperature sensing for superb reliability and ruggedness.
Download Datasheet Product Details
Sponsored by Mouser
 
 
90 Degree Hybrid Coupler
90° Hybrid SMT Coupler from 5 to 6.3 GHz
90 Degree Hybrid Coupler  from TTM Technologies

The X4C55J1-03G from TTM Technologies is a 90° Hybrid Coupler that operates from 5 to 6.3 GHz. This 3 dB coupler has an insertion loss of less than 0.5 dB and provides more than 20 dB of isolation. It has an amplitude balance of ±0.5 dB and a phase balance of ±4°. The coupler can handle an input power of up to 5 W and has an operating temperature range from -55 to +140°C.
Download Datasheet Product Details
RF Switch
SP16T Absorptive Switch from 0.25 to 18 GHz
RF Switch  from Planar Monolithics Industries

The P16T-250M18G-60-T-512-SFF-DEC-1W from Planar Monolithics is an SP16T Absorptive Switch that operates from 0.25 to 18 GHz. The switch has an insertion loss of 6 dB, isolation of over 60 dB, and a switching speed of 150 nsec. It can handle CW input power of up to 30 dBm and requires a +5 V and -12V of DC supply. It has a 4-Bit decoded TTL control logic.
Download Datasheet Product Details
Block Up Converter
20 W GaN Block Upconverter from 27.5 to 31 GHz
Block Up Converter  from ERZIA

The ERZ-BUC-2750-3100-43 from Erzia is a Block Upconverter (BUC) that operates in the Ka-Band from 27.5 to 31 GHz and has an IF frequency from 950 to 1950 MHz. It delivers a saturated output power of 20 W and 10 W of linear power with an adjustable gain from 45 to 75 dB in 0.25 dB steps. This BUC is based on the latest GaN technology with an internal PLL that optimizes power consumption.
Download Datasheet Product Details
Band Pass Filter
GaAs MMIC Band Pass Filter from 7 to 9.6 GHz
Band Pass Filter  from AmpliTech

The AGM-009 from AmpliTech is an MMIC Band Pass Filter with a passband from 7 to 9.6 GHz. It can handle a CW input power of 20 dBm and has an insertion loss of 2.2 dB in the passband. The filter provides over 30 dB of rejection above and below the passband. It is available as a bare die that measures 1.00 x 0.750 x 0.1 mm.
Download Datasheet Product Details
Power Divider
40 W, 4-Way Power Divider from 0.698 to 2.7 GHz
Power Divider  from MECA

The 804-10-1.700V from MECA is a 4-Way In-Phase Power Divider/Combiner that operates from 0.698 to 2.7 GHz. It can handle an input power of up to 40 W and has an insertion loss of less than 1 dB. The divider provides isolation of 25 dB and has a VSWR of less than 1.50:1. It has an amplitude balance of ±0.2 dB and a phase balance of ±4°.
Download Datasheet Product Details
Power Divider
2-Way Power Divider/Combiner from 0.7 to 7.25 GHz
Power Divider  from Vaunix

The LPD-752-2 from Vaunix is a 2-Way Power Divider/Combiner that operates from 700 to 7250 MHz. It can handle an input power of up to 20 W as a divider and up to 0.5 W as a combiner. This power divider has an insertion loss of less than 1.5 dB and provides more than 20 dB of isolation. It has an amplitude balance of ±0.5 dB and a phase balance of ±6°.
Download Datasheet Product Details
SATCOM Amplifier System
100 W Ka-Band GaN BUC/Amplifier System from 27.5 to 31 GHz
SATCOM Amplifier System  from Communications & Power Industries

The B5KO from Communications & Power Industries is a Ka-Band SATCOM BUC/Amplifier System that up-converts an input frequency from 950-2000 MHz (L-band) to an output frequency of 27.5-31 GHz (Ka-band). The SSPA provides an output power of 160 W with a gain of over 60 dB. It provides excellent AM/PM, phase noise, and spectral regrowth performance.
Download Datasheet Product Details
RF Shielded Test Enclosure
RF Shielded Test Box for Wireless Device Testing from 20 MHz to 6 GHz
RF Shielded Test Enclosure  from RF Electronics

The HDRF-6U60-B1 from RF Electronics is an RF Shielded Test Box that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides isolation of more than 130 dB which attenuates standing waves and reflections. The RF Test box is equipped with shielded power filters for power connections in the box while still blocking all wireless signals.
Download Datasheet Product Details
Switch Matrix
8 x 8 Non-Blocking Switch Matrix from 350 MHz to 6 GHz
Switch Matrix  from JFW Industries

The 50MS-426 from JFW Industries is an 8 x 8 Non-Blocking Solid-State Switch Matrix that operates from 350 to 6000 MHz. It can handle an input power of +30 dBm, has a switching speed of 10 ms, and has an insertion loss of 18.8 dB. This switch matrix provides an output-to-output isolation of 75 dB (set to different inputs), input-to-output isolation of 95 dB and input-to-input isolation of 75 dB.
Download Datasheet Product Details
Magnetron
100 kW Magnetron Tube from 896 to 929 MHz
Magnetron  from Mega Industries

The L10016-15 from Mega Industries is a Fixed Frequency Magnetron Tube that operates in the L-Band from 896 to 929 MHz. This magnetron is capable of delivering 100 kW of continuous CW output power with high efficiency. It is available in an enclosure that measures 16 x 16 x 30 inches with RCA filament connectors and is ideal for use in industrial processing applications.
Download Datasheet Product Details
RF Test Set
mmWave Antenna Array for Automotive Radar System Testing
RF Test Set  from Rohde & Schwarz

The R&S®QAT100 from Rohde & Schwarz is a mmWave Antenna Array for automotive radar testing systems that operate from 76 to 81 GHz. It has an electronically steerable frontend that enables realistic target generation. The antenna array has up to 2 x 96 individually switchable transmit antennas and can simulate up to 8 completely independent objects.
Download Datasheet Product Details
Frequency Synthesizer
4500 MHz Surface-Mount Fixed Frequency Synthesizer
Frequency Synthesizer  from Z-COMM

The RFS4500A-LF from Z-Communications is a Fixed Frequency Synthesizer that operates at 4500 MHz. The synthesized signal can have an output power of up to 5 dBm and phase noise of -86 dBc/Hz @ 10 kHz offset. It has spurious levels of -65 dBc and harmonics of -25 dBc. The synthesizer requires a DC supply of 3 V for the PLL (consuming 15 mA of current) and 5 V for VCO (consuming 35 mA of current).
Download Datasheet Product Details
Antenna
Omni-Directional Half-Wave Dipole Antenna from 1980 to 2700 MHz
Antenna  from Southwest Antennas

The 1001-265 from Southwest Antennas is an Omni-Directional Half-Wave Dipole Antenna that operates from 1980 to 2700 MHz. This vertically polarized antenna provides up to 2 dBi of gain and has a VSWR of less than 2:1. It can handle CW input power of up to 24 W. The antenna has a horizontal beamwidth of 360° and a vertical beamwidth of 63 to 76°.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]