PREV 9 May, 2022 NEXT

Latest News & White Papers this Week

9 May, 2022 Newsletter - everything RF

Top stories this week. View it in your browser

 
Weekly Edition
Date: 9 May, 2022
 
Sponsored by Copper Mountain Technologies
 
 
Latest News this Week
Automotive Radar Chipset Market to Reach $12.8 Billion by 2027 - Yole
Qualcomm Introduces Third-Gen Wi-Fi 7 Networking Platforms with Data Rates up to 33 Gbps - Qualcomm
SPINNER Group Develops Low PIM Test Load for In-Building Systems - Spinner Group
Teledyne Storm Microwave Introduces Crush-Resistant VNA Test Cables up to 50 GHz - Teledyne Storm Microwave
Ubicquia and Movandi Partner to Develop mmWave Streetlight Repeaters for 5G Deployment - Movandi Corporation
Criteria Labs Partners with CAES to Support US Navy’s Advanced Offboard Electronic Warfare Program - Criteria Labs
Aaronia Develops an Intelligent Drone Detection System to Detect and Immobilize Unwanted Drones - Aaronia AG
University of Arizona Researcher Develops New Method For Measuring Radio Antennas - University of Arizona
Arbe Introduces New RF Chipset with Ultra-High Resolution Radar Image Quality and Increased Range - Arbe Robotics
Keysight Enables Xiaomi to Validate 5G Technology in Smartphones and IoT Devices - Keysight Technologies
Verus Research to Develop Broadband Counter-Electronics Weapons for the Department of Defense - Verus Research
More News
New White Papers & Articles
Massive MIMO - Eight things to consider when testing antenna arrays - Rohde & Schwarz
Effective Number of Bits (ENOB): The Best Digitizer Performance Metric - GaGe by Vitrek
Using Baluns and RF Components for Impedance Matching - Coilcraft
140 GHz Antenna Array for 6G Wireless Communication - Remcom
How a Flexible Upstream Architecture in Amplifiers & Nodes Can Meet Higher Split Requirements - Qorvo
More Whitepapers
Sponsored by Copper Mountain Technologies
Copper Mountain Technologies
Simplify Measurements of Embedded and SMD-sized Components
The Automatic Fixture Removal plug-in from CMT can easily eliminate fixture effects from VNA measurements. Highly accurate measurements of small components are greatly simplified with this software tool. Try it yourself now! Click here to learn more.
Upcoming Event
Event Image
CS MANTECH 2022
Date: 9 to 12 May, 2022
Location: Monterey, California
More Events
Featured Products this Week
Tunable Filter
Digitally Tunable Band-Pass Filter from 1.25 to 2.6 GHz
Tunable Filter  from Analog Devices
The ADMV8526 from Analog Devices is a Digitally Tunable Band-Pass Filter with a center frequency from 1.25 to 2.6 GHz. It has a 3 dB bandwidth of 9% and supports 8-bit (256 states) tuning using an interpolation technique. This filter can handle an RF input power of 24 dBm and has an insertion loss of 4 dB. The filter is ideal for use in land mobile radios, test and measurement equipment, military radars, and electronic warfare and electronic counter-measures, satellite communications, industrial and medical equipment applications.
Download Datasheet | Product Details
RF Mixer
Surface-Mount Triple-Balanced Mixer from 0.01 to 6 GHz
RF Mixer  from Teledyne Microwave Solutions
The MTS6018 from Teledyne Microwave Solutions is a Triple-Balanced Mixer with LO/RF frequency from 0.01 to 6 GHz and an IF frequency from 0.001 to 3 GHz. It has a conversion loss of 7 dB and provides an LO to RF isolation of 30 dB. This mixer is available in a surface-mount package that measures 12.95 x 9.78 x 4.3 mm.
Download Datasheet | Product Details
Automotive Radar Chipset
Multi-Constellation Automotive GNSS Receiver IC
Automotive Radar Chipset  from STMicroelectronics
The STA8135GA from STMicroelectronics is a Multi-frequency, Multi-constellation GNSS Receiver IC for automotive applications. It has 80 tracking channels and 4 fast acquisition channels with a notch filter for anti-jamming. The receiver supports GPS, Galileo, Glonass, BeiDou, NAVIC (former IRNSS), and QZSS, in L1, L2, L5, and E6 frequency bands.
Download Datasheet | Product Details
GNSS Module
Automotive Grade Dual-Band GNSS Module with cm-Level Accuracy
GNSS Module  from Quectel
The LG69T-AM from Quectel is an Automotive Grade GNSS Module that supports L1 and L5 bands. It uses advanced RTK algorithms to provide up to 10 positions per second with sub-10cm horizontal accuracies. The module has an autonomous acquisition sensitivity of -145 dBm, reacquisition sensitivity of -153 dBm, and tracking sensitivity of -160 dBm.
Download Datasheet | Product Details
Front End Module
5 GHz Wi-Fi 6 (802.11ax) Front-End Module with Integrated DPD Coupler
Front End Module  from Skyworks Solutions
The SKY85791-11 from Skyworks is a Wi-Fi 6 (802.11ax) Front-End Module that operates at 5 GHz. It has an integrated single-pole, double-throw (SPDT) transmit/receive (T/R) switch, a low-noise amplifier (LNA) with bypass, a power amplifier (PA), a logarithmic power detector for closed-loop power control, and a directional coupler for digital pre-distortion (DPD).
Download Datasheet | Product Details
RF Amplifier
1kW Solid-State Power Amplifier from 1 to 6 GHz for EMC Testing
RF Amplifier  from AR RF/Microwave Instrumentation
The Model 1000S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW output power of up to 1000 W with a small signal gain of 66 dB. This SSPA has spurious levels of -73 dBc and harmonic distortion of -30 dBc. The low spurious levels and high linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems.
Download Datasheet | Product Details
Sponsored by Copper Mountain Technologies
 
 
Phase Noise Analyzer
Phase Noise Test System from 50 kHz to 40 GHz
Phase Noise Analyzer  from Keysight Technologies
The N5511A is a Phase Noise Test System that operates from 50 kHz to 40 GHz (3 GHz and 26.5 GHz options also available) with offsets from 0.01 Hz to 160 MHz internally. It can be configured for either single or dual-channel operation and has a high dynamic range. This system can measure phase noise down to kT (-177 dBm/Hz at room temperature), which is the theoretical limit for the thermal phase noise floor.
Download Datasheet | Product Details
RF Amplifier
5.9 W GaN Power Amplifier from DC to 6 GHz
RF Amplifier  from Wolfspeed, A Cree Company
The CMPA0060002F1 from Wolfspeed is GaN Broadband Power Amplifier that operates from DC to 6 GHz. It delivers up to 5.9 W of saturated output power with a gain of 12.5 dB and PAE of 39%. The amplifier is available in a flange package that measures 0.5 x 0.5 inches and is suitable for Ultra-broadband amplifiers, fiber drivers, test instrumentation, and EMC driver amplifier applications.
Download Datasheet | Product Details
RF Amplifier
20 W Ka-Band Power Amplifier from 26 to 28 GHz
RF Amplifier  from MI-WAVE
The 955A-27/35/43/KF from MI-WAVE is a Ka-Band Power Amplifier that operates from 26 to 28 GHz. It delivers an output power of 43 dBm (~20 W) with a small signal gain of 35 dB. The amplifier requires a DC supply from 21 to 24 V and consumes 5 A of current. It is available in a module measuring 5 x 7 x 1 inch with 2.92 mm (female) connectors.
Download Datasheet | Product Details
Power Divider
2 Way QMA Power Divider from 0.7 to 2.7 GHz
Power Divider  from MECA
The 802-10-1.700V from MECA is a 2 way power divider which operates from 0.7 to 2.7 GHz. It has an isolation of 22 dB, an insertion loss of 0.50 dB, a VSWR of 1.20:1 and can handle up to 40 W power. It has QMA brass albaloy plated connectors, a Beryllium Copper Gold Plated pin and is housed in an aluminum package.
Download Datasheet | Product Details
RF Variable Attenuator
63 dB Solid-State Programmable Attenuator from 0.1 to 18 GHz
RF Variable Attenuator  from JFW Industries
The 50P-2103 from JFW Industries is a Solid-State Programmable Attenuator that operates from 0.1 to 18 GHz. This USB-controlled attenuator has seven individually controlled attenuation steps: 0.5, 1, 2, 4, 8, 16 and 32 dB to cover a total attenuation range of 0 to 63 dB. The attenuator operates bi-directionally and can handle up to 24 dBm of power at the input port and 15 dBm of power at the output port.
Download Datasheet | Product Details
Switched Filter Bank
6-Channel Switch Filter Bank from 5.5 to 18.5 GHz
Switched Filter Bank  from Planar Monolithic Industries
The 6SFB-55185-SMA from Planar Monolithic Industries is a 6-Channel Switch Filter Bank that operates from 5.5 to 18.5 GHz. It has a switching speed of less than 200 ns and provides channel isolation of 50 dB. The switch can handle an input power of up to 1 W and has an insertion loss of less than 6 dB. It requires a DC supply of ±5 V and consumes less than 550 mA of current.
Download Datasheet | Product Details
Down Converter
Microwave Downconverter from 0.5 to 18 GHz
Down Converter  from Mercury Systems
The RFX-3170 from Mercury Systems is a Microwave Downconverter that converts an input frequency from 0.5-18 GHz to an output from 750-1250 MHz with a tuning resolution of 10 kHz. It provides 10-30 dB of gain in 1 dB steps. This converter provides 70 dB of image rejection, has a 3rd order SFDR of more than 60 dB, and spurious levels of better than -70 dBc.
Download Datasheet | Product Details
RF Amplifier
18 to 40 GHz Low Noise Amplifier for Military & Space Applications
RF Amplifier  from AmpliTech
The APT4-18004000-4008-D20-N from AmpliTech is a Low-Noise Amplifier that operates from 18 to 40 GHz. It provides a gain of 40 dB with a noise figure of 3 dB and has a P1dB of 8 dBm. Constructed for MIL-883 and MIL-45208 standards, this amplifier has been designed on a state-of-the-art PHEMT process and has good gain flatness across the band.
Download Datasheet | Product Details
RF Switch
AlGaAs SP3T Switch from 2 to 22 GHz
RF Switch  from MACOM
The MASW-011130 from MACOM is an SP3T PIN Diode Switch that operates from 2 to 22 GHz. It has a very fast-switching speed of less than 10 ns and can handle up to 33 dBm of CW input power. The switch has an insertion loss of 1 dB and provides over 35 dB of isolation. It is fully passivated with silicon nitride and has an added polymer layer for scratch protection.
Download Datasheet | Product Details
RF Amplifier
6 kW Pulsed Solid-State Power Amplifier from 500 MHz to 2 GHz
RF Amplifier  from Exodus Advanced Communications
The AMP2068P-LC-6KW from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 500 MHz to 2 GHz. It delivers a peak pulsed output of 6 kW with more than 68 dB of gain. This Class AB linear amplifier has an input pulse width of up to 100 µS with a maximum duty cycle of 6%. It is ideal for use in broadband EMI/RFI, lab, pulse/HIRF, Mil-Std 461/464, and Radar applications.
Download Datasheet | Product Details
Cellular IoT Module
Single-Mode LTE Cat M1 Module for IoT and M2M Devices
Cellular IoT Module  from Sequans Communications
The Monarch GMS01Q from Sequans is a Single-Mode LTE Cat M1 Module that is designed for IoT applications. It is based on Sequans’ Monarch LTE platform that provides significant improvements in performance and power consumption over the previous version while offering seamless migration. It provides a Tx power of up to 23 dBm and has an uplink data rate of up to 300 kbps and a downlink of up to 375 kbps.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 6 GHz
Vector Network Analyzer  from Copper Mountain Technologies
The R60 is a single port USB-powered VNA (Reflectometer) capable of measuring S11 from 1 MHz to 6.0 GHz. It can be operated from any Windows PC or laptop using a USB cable. The R60 provides a wide variety of analysis capabilities, including S11, time-domain with gating, DTF measurements and much more.
Download Datasheet | Product Details
Integrated Microwave Assembly
5 W GaN Solid-State Bi-Directional Amplifier from 1.3 to 2.7 GHz
Integrated Microwave Assembly  from Linwave
The LW10-797597 from Linwave Technology is a GaN Solid State Bi-Directional Amplifier that operates from 1.3 to 2.7 GHz. In Tx mode, it delivers a saturated output power of +37 dBm (5 W) with a large signal gain of 20 dB and an efficiency of 40%. In Rx mode, it provides a gain of 20 dB and has a noise figure of less than 3 dB.
Download Datasheet | Product Details
RF & Microwave Circulator
20 W L-Band Coaxial Circulator from 800 to 1200 MHz
RF & Microwave Circulator  from Atlantic Microwave
The ACC-20010 from Atlantic Microwave is a Coaxial Circulator that operates in the L-band from 800 to 1200 MHz. It can handle an input power of 20 W, has an insertion loss of 0.6 dB, and provides 18 dB of isolation. This circulator is available in a module that measures 50 x 50 mm with standard SMA connectors and is ideal for use in low power applications in communications.
Download Datasheet | Product Details
Microwave Generator
75 kW Microwave Generator Operating at 896/915/929 MHz
Microwave Generator  from Ferrite Microwave Technologies
The GET2024 from Ferrite Microwave Technologies is a Microwave Generator that operates at 896/915 MHz. It delivers an output power of up to 75 kW and can also be used in combination with other FMT generators to provide boosting, cooking, and tempering power up to 750 kW. This generator incorporates the latest electronic and microwave technology to provide reliable and safe operation in all kinds of applications.
Download Datasheet | Product Details
Between Series RF Adapter
90 GHz 1.35 mm Plug (M) to 1.0 mm Jack (F) Adapter
Between Series RF Adapter  from Southwest Microwave
The 222430-00SF from Southwest Microwave is an RF coaxial adapter that operates from DC to 90 GHz. This 1.35 mm plug (male) to 1 mm jack (female) adapter has a low insertion loss, leakage of less than -100 dB, and VSWR of less than 1.28:1. It is available in a passivated stainless-steel housing with gold plated BeCu contacts.
Download Datasheet | Product Details
Antenna
4-Port 4x4 MIMO Panel Antenna from 694 to 4000 MHz
Antenna  from Spinner Group
The A77676 from the Spinner Group is a 4-Port 4x4 MIMO Antenna that operates from 694 to 4000 MHz. This ±45° polarized antenna provides a gain of 6.5 dBi. It has a horizontal beamwidth of 75° (@694 to 960 MHz) and a vertical beamwidth of 70° (@694 to 960 MHz). The antenna can handle an input power of up to 50 W (per port), has a VSWR of less than 1.8 and a passive intermodulation (PIM) of less than -153 dBc.
Download Datasheet | Product Details
Antenna
Adhesive-Mount Flexible UWB Antenna from 698 to 6000 MHz
Antenna  from Abracon LLC
The AFAC120050-U6G from Abracon is a Flexible UWB Antenna that operates from 698 to 6000 MHz. This linearly polarized antenna provides a gain of up to 5 dBi and has a VSWR of less than 4:1. It supports applications in the cellular 2G/3G/GSM, 4G/LTE, 2.4/5 GHz Wi-Fi, and GNSS bands. The antenna is available in an adhesive-mount package that measures 120.0 x 50.0 x 0.2 mm and has an IPEX connector.
Download Datasheet | Product Details
RFID Tag
RFID Label with 3.9 m Read Range and On Metal Functionality
RFID Tag  from Omni-ID, Ltd
The IQ 300 M730 from Omni-ID is an RFID Label that operates from 866 to 868 MHz (EU) and 902 to 928 MHz (US). It has a read range of up to 3.9 m with a fixed reader and up to 2 m with a handheld reader. This RFID label uses the Impinj-M730 chip with an EPC memory of 128 bits and a unique TID memory of 48 bits.
Download Datasheet | Product Details
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]