1. everything RF
  2. RF Newsletters
more
PREV 15 June, 2022 NEXT

New RF and Microwave Products this Week

15 June, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 15 June, 2022
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week
RF Amplifier
20 W GaN Power Amplifier from 17.3 to 21.2 GHz
RF Amplifier  from Qorvo

The QPA1724 from Qorvo is a GaN MMIC Power Amplifier that operates from 17.3 to 21.2 GHz. It delivers a saturated output power of 20 W (~43 dBm) with a small signal gain of 25 dB and power-added efficiency (PAE) of 27%. This amplifier is ideal for wide bandwidth multi-carrier high data throughput satellite applications.
Download Datasheet Product Details
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 5000 to 6500 MHz
Voltage Controlled Oscillator  from Teledyne Microwave Solutions

The OS6500 from Teledyne Microwave Solutions is a Voltage Controlled Oscillator that operates from 5000 to 6500 MHz. It delivers an output power of 1 dBm with SSB phase noise of -102 dBc/Hz at 100 kHz offset. This VCO has a tuning voltage from 0 to 15 V and has a modulation sensitivity from 80 to 190 MHz/V.
Download Datasheet Product Details
Rubidium Oscillator
10 MHz Ultra-Portable High Precision & Performance Rubidium Oscillator
Rubidium Oscillator  from Orolia

The Spectratime mRO-50 from Orolia is a 10 MHz Low SWaP-C Miniaturized Rubidium Oscillator that has been designed to meet the latest commercial, military, and aerospace requirements where time stability and power consumption are critical. The clock design is based on the proven rubidium clock heritage at Orolia and has been adapted for low power (0.36 W @ 3.3V) and size.
Download Datasheet Product Details
Termination
25-Ohm RF Termination from DC to 2 GHz
Termination  from Broadwave Technologies

The 592-381-010 from is a 25-Ohm RF Termination that operates from DC to 2 GHz. It can handle an average input power of up to 10 W with a VSWR of less than 2:1. This 25-ohm termination measures 1.53 (L) x 0.50 (D) inches. Other 25 Ohm units are available in 1, 2, 5, 30, 50 and 100-Watt average input power configurations.
Download Datasheet Product Details
Band Pass Filter
Bandpass Filter MMIC with Passband from 17.52 to 21.45 GHz
Band Pass Filter  from AmpliTech

The AGM-011 from AmpliTech is a GaAs Bandpass Filter MMIC with a passband from 17.52 to 21.45 GHz. It has a passband insertion loss of less than 3.8 dB and provides more than 30 dB of rejection at 12.58 and 27.77 GHz. The filter is available in a package that measures 1.00 x 0.75 x 0.10 mm and is suitable for use in communication systems, point-to-point radios, fiber optics, test equipment, and military & space applications.
Download Datasheet Product Details
RF Switch
SP3T Switch from 20 MHz to 3 GHz with Low Video Transients
RF Switch  from Quantic PMI (Planar Monolithics)

The PEC-20M3G-3T-SFF-LV-ROHS from Quantic PMI is an Absorptive SP3T Switch that operates from 20 MHz to 3 GHz. It has an insertion loss of less than 4 dB and provides more than 50 dB of isolation. This switch offers ultra-low video transients of -100 dBm above 20 MHz and -75 dBm below 20 MHz. It requires a DC supply of +5/-12 V and consumes less than 250 mA of current.
Download Datasheet Product Details
Sponsored by Mouser
Mouser
GaAs MMIC pHEMT Low-Noise Amplifier
Analog Devices HMC8413 Low-Noise Amplifier is a gallium arsenide (GaAs), MMIC, pseudomorphic high electron mobility transistor (pHEMT), low-noise wideband amplifier that operates from 0.01GHz to 9GHz. The HMC8413 provides a typical gain of 19.5dB and a 1.9dB typical noise figure. Click here to learn more.
Horn Antenna
Double Ridged Horn Antenna from 1 to 18 GHz for EMC/EMI Testing
Horn Antenna  from RF SPIN

The DRH18-ER from RF Spin is a Double Ridged Horn Antenna that operates from 1 to 18 GHz. This linearly polarized antenna is manufactured using a high-grade aluminum alloy and is designed for EMC/EMI testing. It can handle a CW input power of 100 W, has an antenna factor from 23 to 44 dB/m, and has a VSWR of less than 2.2:1.
Download Datasheet Product Details
Microwave Generator
20 kW GaN SSPA Microwave Generator from 2400 to 2500 MHz
Microwave Generator  from RFHIC

The RIK2520K-40TG from RFHIC is an SSPA GaN Microwave Generator that operates from 2400 to 2500 MHz. This microwave generator has been designed for industrial microwave drying, heating, and plasma generating applications. It delivers a CW output power of 20 kW with a system efficiency of 55%. This generator has a frequency resolution of 100 kHz and allows phase adjustment from 0 to 360°.
Download Datasheet Product Details
RF Amplifier
900 W Solid-State Power Amplifier from 2.5 to 7.5 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2140C-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2.5 to 7.5 GHz. It delivers a CW/Pulsed output power of more than 900 W with a minimum gain of 60 dB. This Class A/AB power amplifier has spurious levels of less than -60 dBc and harmonics of -20 dBc. It is equipped with built-in protection circuits and provides extensive monitoring parameters for signal channel modulation, forward and reflected power (in Watts and dBm), VSWR, voltage, current and temperature.
Download Datasheet Product Details
GNSS Module
Multi-Constellation GNSS Patch Antenna Modules
GNSS Module  from Telit Communications

The SE868K3-A/AL Series from Telit are Multi-Constellation GNSS Patch Antenna Modules that operate in the GPS L1, GLONASS L1, QZSS L1, and Galileo L1 bands. These smart antenna modules provide a sensitivity of up to -145 dBm during data acquisition and -160 dBm during tracking. The module consists of a low-profile SMT Patch Antenna, SAW filter, flash memory, multi-constellation GNSS core, RTC, and TCXO.
Download Datasheet Product Details
GNSS Module
Multi-Constellation GNSS Module with 48 Tracking Channels
GNSS Module  from LOCOSYSTECH

The ST-1612i-G from LOCOSYS is a GNSS Receiver Module that can simultaneously acquire and track multiple satellite constellations. It has 48 tracking channels and 2 fast acquisition channels with a cold start acquisition time of 29s. The module has a tracking sensitivity of up to -161 dBm and a cold start sensitivity of up to -146.5 dBm.
Download Datasheet Product Details
RF Spectrum Analyzer
Military-Grade Outdoor Real-Time Spectrum Analyzer from 10 MHz to 6 GHz
RF Spectrum Analyzer  from Aaronia AG

The SPECTRAN® V6 MIL from Aaronia is a Military Certified outdoor Real-Time Spectrum Analyzer that operates from 10 MHz to 6 GHz (optional 8 GHz available). It provides up to 245 MHz (I/Q) of real-time bandwidth and can sweep the complete band in less than 5 ms (1 THz/s). The analyzer is designed for frequency monitoring and for detecting, analyzing, and recording unknown and illegal signal transmissions. It can also be used as an extremely rugged and powerful Windows laptop.
Product Details
Sponsored by Mouser
 
 
RF Test Set
PXIe 5G mmWave Semiconductor Production Test Systems
RF Test Set  from Marvin Test Solutions

The TS-900e-5G Series from Marvin Test Solutions are 5G mmWave Semiconductor Production Test Systems for applications requiring parallel, multi-site test capabilities. They provide production-proven 44 GHz signal delivery to the device under test (DUT), with optional VNA RF test capabilities to 53 GHz. These systems can support up to 40 independent VNA ports.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 100 kHz to 43.5 GHz
RF Spectrum Analyzer  from Signal Hound

The SM435B from Signal Hound is a real-time spectrum analyzer and monitoring receiver that operates from 100 kHz to 43.5 GHz. It has 160 MHz of instantaneous bandwidth, a dynamic range of 110 dB, 1 THz/sec sweep speed at 30 kHz RWB (using Nutwall windowing), and ultra low phase noise. The low levels of phase noise rival some of the more expensive spectrum analyzers on the market.
Download Datasheet Product Details
RF Cable Assembly
110 GHz Semi-Rigid Cable Assembly for Test and Measurement
RF Cable Assembly  from Times Microwave Systems

The Clarity 110-SR from Times Microwave Systems is a Semi-Rigid Test and Measurement Cable Assembly that operates up to 110 GHz. This cable assembly is specifically designed for applications that require low loss and excellent phase stability. It has the capability to maintain a specific shape after installation in enclosures or in areas where no movement of the cable assembly is required.
Download Datasheet Product Details
RF Connector
1.35 mm RF Cable Connector from DC to 90 GHz
RF Connector  from Samtec

The PRF13 from Samtec is a 1.35 mm RF Cable Connector that operates from DC to 90 GHz. It has an impedance of 50 ohms and a solder clamp to support .047 Temp-Flex low loss flexible cables. This bulkhead plug/jack connector is available in a package that measures Ø5.8 mm (plug) & Ø4.84 mm (jack).
Download Datasheet Product Details
RF Cable
79 GHz Phase Stable Semi-Rigid Cables
RF Cable  from EZ Form Cable Corporation

The EZ-PT86 Series from EZ Form Cable are Phase Stable Semi-Rigid Cables that operate up to 79 GHz. They are developed for RF applications where minimal phase change over temperature is required. These cables have a minimum bend radius of 0.25 inches, an inner conductor diameter of 0.0226 inches, dielectric diameter of 0.065 inches and outer conductor diameter of 0.086 inches.
Download Datasheet Product Details
RF Amplifier
Low Noise MMIC Amplifier from 10 to 30 GHz
RF Amplifier  from Mini Circuits

The PMA3-34GLN+ from Mini-Circuits is a Low Noise MMIC Amplifier that operates from 10 to 30 GHz. It provides more than 18 dB of gain with a noise figure of less than 2.4 dB and has a P1dB of 11 dBm. This LNA provides a unique combination of high gain and low noise figure over a very broad bandwidth making it ideal for use as a first stage driver amplifier in receiver applications.
Download Datasheet Product Details
RF Amplifier
X-Band Low Noise Amplifier 7500 to 8500 MHz
RF Amplifier  from Kuhne Electronic

The KU LNA 750850 A WG from KUHNE Electronics is a Low Noise Amplifier that operates in the X-band from 7500 to 8500 MHz. It provides more than 65 dB of gain with a noise figure of less than 0.95 dB and has a P1dB of 13 dBm. This LNA has reverse polarity protection and a low-power enable pin.
Download Datasheet Product Details
Waveguide Filter
Waveguide Filters with Passband from 4 to 4.2 GHz
Waveguide Filter  from Vaunix

The VSF-K Series from Vaunix are C-Band SATCOM Waveguide Filters with a passband from 4000 to 4200 MHz. They have an insertion loss of less than 1.3 dB and provide more than 25 dB of rejection above and below the passband. The filters are available with flat & thru-hole, flat & threaded hole, grooved & thru-hole, and grooved & threaded hole flange options.
Download Datasheet Product Details
Bi-Directional Coupler
10 dB Directional Coupler from 0.6 to 40 GHz
Bi-Directional Coupler  from Marki Microwave

The CE10-0R640 from Marki Microwave is a Directional Coupler that operates from 0.6 to 40 GHz. This 10 dB coupler has a directivity of 22 dB and an insertion loss of less than 2.3 dB. It utilizes conductive paint applied on it to reduce EMI/RFI leakage and susceptibility. The coupler is available as both a three-port directional coupler and a four-port bidirectional coupler in a module that measures 5.10 x 0.69 x 0.5 inches.
Download Datasheet Product Details
Power Divider
Space-Qualified 2-Way Power Divider from 0.5 to 26.5 GHz
Power Divider  from KRYTAR

The 6005265-SQ from KRYTAR is a 2-Way Power Divider that operates from 0.5 to 26.5 GHz. It can handle up to 10 W of input power, has an insertion loss of less than 1.9 dB and provides more than 19 dB of isolation. The power divider has amplitude tracking of ±0.5 dB and phase tracking of ±10°. It is space-qualified and has undergone additional reliability and quality assurance inspections during all phases of assembly, electrical evaluation, and shock/vibration testing.
Download Datasheet Product Details
RF Amplifier
55 W GaN Power Amplifier from 12.5 to 15 GHz
RF Amplifier  from Nxbeam Inc

The NPM1000-KW from Nxbeam is a GaN Power Amplifier module that operates in the Ku-band from 12.5 to 15 GHz. It delivers a saturated output power of 55 W with a power gain of 34 dB and an efficiency of 18%. This amplifier requires a DC supply from 20 to 28 V and consumes less than 10 A of current.
Download Datasheet Product Details
Low Noise Block
Weather-Proof PLL Low Noise Blocks from 10.95 to 11.7 GHz
Low Noise Block  from New Japan Radio

The NJR2845AE Series from Nisshinbo Micro Devices are Ku-Band PLL Low Noise Blocks that down-convert an input frequency (RF) from 10.95-11.7 GHz to an output frequency (IF) from 950-1700 MHz. They provide a linear gain of more than 52 dB and have a noise figure of less than 1.0 dB.
Download Datasheet Product Details
Base Station Antenna
Wideband Array Sector Antennas from 3400 to 3800 MHz
Base Station Antenna  from RF elements s.r.o

The Array Sector Series from RF Elements are Patch Array Sector Antennas that operate from 3400 to 3800 MHz. These antennas use the patented BackShield Technology with frequency-selective surfaces for attenuating azimuthal side lobes and back radiation to significantly improve the co-location capability. These dual linear H+V polarized antennas provide more than 17 dBi of gain and have a VSWR of less than 1.6:1.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]