1. everything RF
  2. RF Newsletters
more
PREV 22 June, 2022 NEXT

IMS 2022 Product Update - Part 1

22 June, 2022 Newsletter - everything RF

Interesting products at IMS 2022. View it in your browser

 
IMS 2022 Product Update
Date: 22 June, 2022
 
Sponsored by Rohde & Schwarz
 
 
Interesting Products Showcased at IMS 2022 - Part 1
Vector Network Analyzer
16-Port Vector Network Analyzer from 300 kHz to 9 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The SN5090-16 from Copper Mountain Technologies is a 16-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA is an organic extension of the Compact VNA solutions offered by CMT. It enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times.
Download Datasheet Product Details
RF Connector
Horizontal/Vertical Mount Board-to-Board Connectors from DC to 67 GHz
RF Connector  from Southwest Microwave

The SuperMini Series from Southwest Microwave are Board-to-Board Connectors that operate from DC to 67 GHz. They optimize interconnect performance for board-to-board stacking applications and maximize electrical performance of the transmission path between connector and circuit while accommodating axial misalignment of 10 mm and radial misalignment of ±10 degrees with no resonance.
Download Datasheet Product Details
Frequency Multiplier
18x Frequency Extender with Output from 220-330 GHz
Frequency Multiplier  from ERAVANT

The STE-KF1803-S1 from Eravant is an 18x Frequency Extender that converts input signals from 12.22-18.33 GHz to output signals 220-330 GHz. It has harmonics suppression of -15 dBc and spurious suppression of -60 dBc. This frequency extender uses Eravant’s HPA technology and ACST high-power multiplier technology to provide state-of-the-art performance at mmWave/Sub-mmWave frequencies.
Download Datasheet Product Details
RF Cable Assembly
Ultra-Flexible RF Cables from DC to 26.5 GHz
RF Cable Assembly  from HASCO Components

The Littlebend™ from Hasco are Ultra-Flexible RF Cables that operate from DC to 26.5 GHz. These extremely flexible, triple-shielded cables have been designed for demanding microwave interconnect applications and system designs requiring dense packaging. The cables are available in standard lengths from 3 to 48 inches (can also be ordered in custom lengths) with high-performance SMA straight connectors.
Download Datasheet Product Details
Vector Network Analyzer
2-Port Vector Network Analyzer from 300 kHz to 6 GHz
Vector Network Analyzer  from Mini Circuits

The eVNA-63+ from Mini-Circuits is a 2-Port, Computer Controlled Vector Network Vector Analyzer that operates from 300 kHz to 6 GHz. It can be used to conduct full characterization of 1 port and 2 port devices with options to analyze S11, S12, S21, and S22 s-parameters. This VNA has a Dynamic Accuracy Magnitude of up to 0.35 dB with a noise floor of less than -110 dBm/Hz and cross-talk of -115 dB.
Download Datasheet Product Details
RF Amplifier
1.5 kW Pulsed GaN Solid-State Power Amplifier from 9 to 10 GHz
RF Amplifier  from Communications & Power Industries

The VSX3716 from Communications and Power Industries is a GaN Solid-State Power Amplifier that operates in the X-band from 9.0 to 10.0 GHz. This SSPA delivers a pulsed saturated output power of 1.5 kW with a small signal gain of 58 dB, a pulse width from 1 to 100 µs, and a duty cycle of up to 10%.
Download Datasheet Product Details
Sponsored by Rohde & Schwarz
Rohde & Schwarz
Rohde & Schwarz Webinar: IIoT security - minimize production risks caused by cyber attacks
This webinar is intended for managers who are responsible for securing the operational technology for Industrial IoT (IIoT) networks, for whom cyberattacks are a fact of life. Click here to learn more.
Tunable Filter
Digitally Tunable MMIC Multi-octave Filter from 2 to 18 GHz
Tunable Filter  from Analog Devices

The ADMV8818 from Analog Devices is a Digitally Tunable MMIC Multioctave Filter that operates from 2 to 18 GHz. The filter consists of four independently controlled high-pass filters (HPFs) and low-pass filters (LPFs). The digital logic control on each filter is 4 bits wide (16 states) and can drive the on-chip reactive elements to adjust the 3 dB cut off frequency for up to 4 GHz of bandwidth.
Download Datasheet Product Details
Rubidium Oscillator
10 MHz Ultra-Portable Ruggedized Rubidium Oscillator
Rubidium Oscillator  from Orolia

The mRO-50 Ruggedized Oscillator from Orolia is a Robust Low SWaP-C Mini-Rubidium Oscillator with a frequency of 10 MHz. This ruggedized oscillator has been designed to meet the latest military and aerospace requirements where time stability and power consumption are critical. Its wide-range operating temperature of -40°C to 80°C is also ideal for various range of applications such as underwater, military communications, radars, low earth orbit, electronic warfare, airborne and unmanned vehicles.
Download Datasheet Product Details
RF Amplifier
25 W GaN Power Amplifier from 27 to 31 GHz
RF Amplifier  from Nxbeam Inc

The NPA2003-FL from Nxbeam is an RF Power Amplifier that operates from 27 to 31 GHz. It delivers a saturated output power of 25 W (44 dBm) with a small signal gain of 23 dB and has a PAE of 25%. This GaN amplifier consists of three gain stages that can be biased independently providing flexibility to tailor a performance to specific application needs.
Download Datasheet Product Details
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz
Frequency Synthesizer  from Holzworth Instrumentation

The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers provide a frequency step size of 0.001 Hz, have a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet Product Details
Signal Generator
USB / Ethernet Controlled Signal Generator from 0.5 to 40 GHz
Signal Generator  from Vaunix

The BLX-403 from Vaunix is an RF signal generator that operates from 0.5 to 40 GHz. It has a frequency resolution of 100 Hz, +10 dBm output power with 40 dB output level control. The signal generator offers both USB and Ethernet interfaces. It is an affordable Signal Generator with low harmonic energy.
Download Datasheet Product Details
RF Amplifier
E-Band mmWave Power Amplifier (8-Way) from 71-76/81-86 GHz
RF Amplifier  from Filtronic

The Cerus 8 from Filtronic is a power amplifier that operates in the E-Band from 71 to 76 GHz (AA021) and 81 to 86 GHz (AA022). It is designed using GaAs MMICs that are performance-matched and efficiently combined in a waveguide to deliver maximum power. The amplifier delivers a saturated output power of more than 28 dBm with a small signal gain of 24 dB.
Download Datasheet Product Details
Sponsored by Rohde & Schwarz
 
 
Power Sensor
USB Power Sensor from 9 kHz to 44 GHz
Power Sensor  from LadyBug Technologies

The LB5944L from Ladybug Technologies is a True RMS Microwave Power Sensor that operates from 9 kHz to 44 GHz. The high sensitivity, high accuracy RF sensor is ideal for EMC applications, general-purpose average power, and scalar measurements. It is recommended for average power measurements on signals of any modulation type, including 802.11ac, GSM, CDMA 2000, CDMA (IS-95), TDMA, Multi-Tone, OFDM, CW, and QAM.
Download Datasheet Product Details
Vector Network Analyzer
Vector Network Analyzer for Fast & Accurate Measurements up to 43.5 GHz
Vector Network Analyzer  from Rohde & Schwarz

The R&S ZNB Series of Vector Network Analyzers have been developed to carry out fast, accurate measurements from 9 kHz to 43.5 GHz (4.5 GHz, 8.5 GHz, 20 GHz, 40 GHz and 43.5 GHz). These VNAs are available with 2 or 4 ports and can be expanded up to 48 ports using switch matrices. They have a wide dynamic range of up to 140 dB with an IF bandwidth from 1 Hz to 10 MHz.
Download Datasheet Product Details
Balun
Surface-Mount Broadband Balun from 10 MHz to 32 GHz
Balun  from Marki Microwave

The BAL-0032SSG from Marki Microwave is a Broadband RF Balun that operates from 10 MHz to 32 GHz. This balun has an insertion loss of less than 8 dB and provides 8 dB of isolation. It has an amplitude balance of 1.5 dB and a phase balance of less than 13°. This RoHS compliant 50 ohms balun has common-mode rejection of 25 dB and a phase shift of 180°.
Download Datasheet Product Details
Down Converter
Single-Stage Downconverter with RF Frequency from 20 to 40 GHz
Down Converter  from SignalCore

The SC5320A from SignalCore is a Single-stage Downconverter that converts an input RF frequency from 20 - 40 GHz to an output IF frequency from 100 MHz - 4 GHz. It has an external LO frequency range from 10 to 20 GHz. The downconverter features an internal synthesized local oscillator, selectable RF preamplifier, and variable gain control together enabling standalone functionality.
Download Datasheet Product Details
RF Transistor
500 W GaN HEMT from 2.9 to 3.5 GHz for S-Band Radar Systems
RF Transistor  from Wolfspeed, A Cree Company

The CGHV35400F1 from Wolfspeed is a GaN HEMT that operates from 2.9 to 3.5 GHz for S-band radar systems. It provides up to 500 W (57.1 dBm) of pulsed output power with a power gain of 11.1 dB and drain efficiency of up to 69%. The GaN HEMT has a duty cycle of 20% with 2 ms pulse lengths.
Download Datasheet Product Details
RF Spectrum Analyzer
High Performance Signal Analyzers for mm-Wave 5G and SATCOM Applications
RF Spectrum Analyzer  from Keysight Technologies

The N9042B UXA X-Series from Keysight Technologies are Signal Analyzers that operate from 2 Hz to 26.5/44/50 GHz and cover current 5G-NR, FR1, FR2 as well as most RADAR, EW and satellite bands. They provide an ultra wide analysis bandwidth of up to 11 GHz which is configured using an external digitizer.
Download Datasheet Product Details
RF Variable Attenuator
31 dB Programmable Attenuator from 0.01 to 21 GHz
RF Variable Attenuator  from Micro Lambda Wireless, Inc.

The MLAT-1000A from Micro Lambda Wireless is a Single Channel Programmable Attenuator that operates from 0.01 to 21 GHz. It has an attenuation range from 0 to 31.5 dB with a step size of 0.5 dB. The attenuator can handle an input power of 28 dBm, has an insertion loss of less than 7 dB, and a VSWR of 2.1:1.
Download Datasheet Product Details
Directional Coupler
30 dB Directional Coupler from 26.5 to 40 GHz
Directional Coupler  from KRYTAR

The 264030 from KRYTAR is a Directional Coupler that operates from 26.5 to 40 GHz. This 30 dB coupler has a directivity of more than 12 dB and an insertion loss of less than 1.3 dB. The coupler can handle an average input power of 20 W and a peak input power of 3 kW. It has a frequency sensitivity of ± 0.5 dB and a VSWR of less than 1.70:1.
Download Datasheet Product Details
Bias Tee
30 V Bias Tee from 160 kHz to 110 GHz
Bias Tee  from HYPERLABS

The HL9449 from Hyperlabs is a Bias Tee that operates from 160 kHz to 110 GHz. It has a DC breakdown voltage of up to 30 V and a breakdown current of 175 mA. The bias tee has an insertion loss of less than 2.5 dB and has a rise time of 3.2 ps. It has an amplitude match of ±0.1 dB and a phase match of ±4°.
Download Datasheet Product Details
RF Connector
8/16 Channel Mini-SMP Connectors from DC to 40/65 GHz
RF Connector  from Rosenberger

The Multiport Mini-SMP Connector Series from Rosenberger are designed to be mounted solderless on printed circuit board. They can operate at frequencies from DC to 40/65 GHz and are available in 8/16 channel options. These connectors have high electrical and mechanical stability and are easy to handle and repair.
Download Datasheet Product Details
Rubidium Oscillator
10 MHz Highly-Stable Programmable Rubidium Frequency Standard
Rubidium Oscillator  from Morion US

The RFS-M102 from Morion is a Low-Cost Programmable Rubidium Frequency Standard that operates at 10 MHz. It provides Sine (default) and LVCMOS output signal waveforms with a phase noise of -120 dBc/Hz @ 100 Hz offset. This oscillator has 1 PPS input/output by default with multiple user options (1PPS output pin is user-programmable).
Download Datasheet Product Details
RF Power Meter
Dual-Channel RF Power Meter from 10 MHz to 8 GHz with PoE Support
RF Power Meter  from Kuhne Electronic

The KU PM BB 001800 from Kuhne Electronic is a Dual-Channel RF Power Meter that operates from 10 to 8000 MHz. It features 2 independent measurement channels, which cover a dynamic range from -65 to 0 dBm. This power meter is designed to offer real-time remote monitoring of various industrial RF systems such as transmitting facilities and coaxial networks via a web browser.
Download Datasheet Product Details
Waveguide Switch
100 ms Waveguide Switch from 18 to 40 GHz
Waveguide Switch  from Logus Microwave

The LWR180 from Logus is a Waveguide Switch that operates from 18 to 40 GHz. It has a maximum switching time of 100 ms, an insertion loss of less than 0.4 dB, and provides isolation of more than 50 dB. This switch can operate over both AC and DC supplies (user selectable). It is available in an aluminum module that measures 2.11 x 2.11 x 4.00 inches.
Download Datasheet Product Details
RF Detector
Zero Bias Schottky Detector from 2 to 18 GHz
RF Detector  from Eclipse MDI

The EZR2018QFN from Eclipse MDI is a High Sensitivity Zero Bias Schottky Detector that operates from 2 to 18 GHz. It has a voltage sensitivity of 1000 mV/mW and a voltage sensitivity stability over a temperature of 3 dB. This detector has a negative polarity and requires no bias. It has a maximum video capacitance of 470 pF and a tangential signal sensitivity (TSS) of -42 dBm.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. This newsletter list some interesting products that are being featured at IMS 2022 in Denver, Colorado this week.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]