| New RF and Microwave Products this Week |
|
|
|
|
|
|
|
| Broadband RF Down Converter Specifically Built for 5G Applications | |
Down Converter
from ThinkRF
|
| The D4000 from thinkRF is an RF Downconverter/Tuner that downconverts an Input RF signal from 24 - 40 GHz to an output IF signal with a frequency of 1.536 GHz. It has a 500 MHz real-time bandwidth, and a 100 kHz tuning resolution, making is ideal for 5G NR FR2 applications. The platform is built on patented and highly innovative software-defined radio (SDR) technologies to extend the frequency range of existing RF signal analyzers from any vendor to meet new wireless requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaAs MMIC Double-Balanced mmWave Mixer from 30 to 100 GHz | |
RF Mixer
from Marki Microwave
|
| The MM1-30100L from Marki Microwave is a GaAs MMIC Double-Balanced mmWave Mixer with an RF/LO frequency from 30 to 100 GHz (RF/LO) and IF Frequency from DC to 20 GHz. It has an LO Drive of +14 dBm with a conversion loss of 8.5 dB. This mixer works both as an up and down converter from the Ka-band through the mmWave/W-band. This mixer is available as a die or in a connectorized module. It is ideal for mmWave frequency conversion, test & measurement equipment, automotive radar, 5G test receivers, and mmWave tuner mixer applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W Solid State Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2077-LC from Exodus Advanced Communications is a Solid-State High-Power Amplifier that operates from 2.0 to 6.0 GHz. It delivers a CW/Pulsed output power of over 400 W with more than 56 dB of gain. This Class A/AB linear SSPA is equipped with built-in protection circuits and provides extensive monitoring parameters for all modulation types, standards, forward/reflected power in Watts & dBm, VSWR, voltage, current, and temperature. It can be used for EMI/RFI, lab, CW/Pulse and all communication applications |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 10 dB Fixed Coaxial Attenuator from DC to 3 GHz | |
Fixed Attenuator
from MECA
|
| The 697-10-1 from MECA is a Fixed Attenuator that operates from DC to 3 GHz. This attenuator is available in various attenuation configurations of 3, 6, 10, 20, 30, or 40 dB. It can handle an average input power of 150 W, peak power of 1 kW (1 microseconds pulse width, 15% duty cycle), and has a VSWR of less than 1.40:1. This 50-ohm attenuator is available in an aluminum alloy body that measures 7.97 x 5 inches with N-type Male/Female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Thin Film Bandpass Filter from 27.5 to 28.5 GHz | |
Band Pass Filter
from Smiths Interconnect
|
| The 6PFX-28000/R1000-M from Smiths Interconnect is a Thin Film RF Bandpass Filter with a passband from 27.5 to 28.5 GHz. This 50 ohm band pass filter provides 30 dB of rejection above and below the band. This filter leverages the latest thin-film process technology on various dielectric substrates such as Alumina which allows operation in harsh environments. The small footprint, light-weight, surface-mountable configuration allow for high volume pick and place applications and are ideal for radar, EW/SIGNT, SATCOM, LEO constellation, and communications applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
