| Interesting Products Showcased at IMS 2022 - Part 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 24 to 40 GHz RF Downconverter for 5G Frequencies | |
Down Converter
from ThinkRF
|
| The D4000 from thinkRF is an RF Downconverter/Tuner that downconverts an Input RF signal from 24 - 40 GHz to an output IF signal with a frequency of 1.536 GHz. It has a 500 MHz real-time bandwidth, and a 100 kHz tuning resolution, making is ideal for applications such as interference hunting, electronic warfare, signals intelligence, spectrum monitoring, RF drive test, transmission test, and customer premise equipment test. |
| |
Download Datasheet |
Product Details | |
|
|
|
| USB/Ethernet Controlled Power Sensor from 0.5 to 40 GHz | |
Power Sensor
from Mini Circuits
|
| The PWR-40PW-RC from Mini-Circuits is a Smart Power Sensor that operates from 0.5 to 40 GHz. This Power Sensor has a dynamic range from -20 to +20 dBm and has a sampling rate of 20 Msps. It has a duty cycle of up to 99.9 and a rise/fall time of 50 ns. The sensor supports modulated, pulsed, and CW signal types and has a 10 MHz internal modulation bandwidth coupled with a data processing rate of 20 million samples per second that enables measurement of a wide range of analog and digital signal modulation types. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Signal Hound | | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1.85mm RF Termination from DC to 65 GHz | |
Termination
from APITech
|
| The TV650 from APITech is a 1.85mm RF Termination that operates from DC to 65 GHz. It can handle an input power of up to 1 W and has a VSWR of less than 1.55:1. This termination has a 1.85 mm interface but can also mate with 2.4 mm connector interfaces. It is available in a robust stainless package and gold plated center connectors suitable for both military and commercial applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 8 W GaN Power Amplifier Module from 3.4 to 3.8 GHz | |
RF Amplifier
from Qorvo
|
| The QPA3810 from Qorvo is a fully integrated Two-Stage Doherty Power Amplifier Module that operates from 3. to 3.8 GHz. It delivers 8 W (~39 dBm) of output power with 33 dB of gain. This GaN amplifier incorporates a driver and Doherty final stage delivering high power-added efficiency for the entire module. It is ideal for 5G massive MIMO, small cell, low-power remote heads and general-purpose applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 8-Way Power Divider/Combiner from 0.5 to 8.0 GHz | |
Power Divider
from MECA
|
| The 808-2-4.250 from MECA is an 8-Way Power Divider/Combiner that operates from 0.5 to 8.0 GHz. It has an insertion loss of less than 4.8 dB with an isolation of over 20 dB. The power divider can handle an input power of up to 30 W and has a VSWR of 1.6:1. It has an amplitude balance of less than 1 dB and a phase balance of under 15°. This power divider/combiner is available in a module that measures 9.21 x 8.51 x 0.75 inches with SMA Female connectors. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
