| New RF and Microwave Products this Week |
|
|
| Cost Effective & Efficient RF Drive Testing Solution | |
RF Spectrum Analyzer
from ThinkRF
|
| The thinkRF R5750 Real-Time Spectrum Analyzer can help avoid costly hardware purchases when analyzing new bands and reduce the amount of equipment required for modern RF drive test applications. The fully integrated RF Drive Test System allows RF Engineers at mobile operators and wireless communication infrastructure providers to use the same hardware for both spectrum analysis and wireless technology scanning. The software can easily be upgraded to new standards or bands through updates, while the modular approach further reduces costs for operators. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 50 W GaN MMIC Power Amplifier from 8 to 11 GHz | |
RF Amplifier
from WAVEPIA Co,. Ltd.
|
| The WPGM0811050M from WavePia is a GaN HEMT MMIC Power Amplifier that operates from 8 to 11 GHz. This X-Band power amplifier delivers over 50 W of saturated output power with 22.11 dB of gain and a power added efficiency of 32.42%. has been fabricated on a 0.25 µm GaN-on-SiC process. GaN has superior properties compared to silicon or gallium arsenide, including higher thermal conductivity, higher saturated electron drift velocity, higher breakdown voltage, greater power density, and wider bandwidths. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 8x8 Non-Blocking Switch Matrix Assembly from 5 to 1218 MHz | |
Switch Matrix
from JFW Industries
|
| The 75MS-052 from JFW Industries is an 8x8 Non-Blocking Switch Matrix Assembly that operates from 5 to 1218 MHz. Non-blocking matrix designs use power dividers on the input half of the matrix and RF switches on the output half of the matrix. This 75-ohm switch matrix can handle an input power of 20 dBm and has an insertion loss of less than 16.5 dB. It has bi-directional ports with a switching speed of 10 ms and provides isolation of more than 70 dB between inputs/outputs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| UHF On-Metal RFID Inlay for Item-Tagging | |
RFID Tag
from TAGEOS
|
| The EOS-232 U8 from TAGEOS is an On-Metal RFID Inlay for item-level tagging and inventory. It is based on NXP’s UCODE 8 IC which features self-adjust capability, a product status flag for electronic article surveillance (EAS) applications, pre-serialized 96-bit EPC, and a brand identifier. The IC supports long read distances and fast inventory of dense RFID tag population due to high read and write sensitivity and fast encoding speed. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Power Divider from 340 to 3800 MHz | |
Power Divider
from CommScope
|
| The S-2-TCPUSEW-H-43I6 from Commscope is a Reactive 2-Way Power Divider that operates from 340 to 3800 MHz. It can handle an average input power of up to 300 W and a peak input power of 3 kW. This power divider has an insertion loss of less than 0.3 dB, a split loss of 3 dB, and a VSWR of 1.25:1. It is available in a module that measures 25 x 66 x 288 mm and has 4.3-10 (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
