 | 27 Jan, 2014 |
|
News, White Papers, Upcoming Events and Featured Products on everything RF. |
|
 White Papers | | |
| |  Industry News | | |
|
|
 Upcoming Event | | Satellite 2014 Date: 10-13 March 2014 Location: Washington DC, United States |  |
|
|
 Featured Products |
|
|  | GaN Amplifier from RFHIC The TG520-10 from RFHIC is a GaN, hybrid, power amplifier which operates from 30 to 520 MHz. It provides up to 39 dBm of power (P1dB), a gain of 16 dB requires a 28 V supply. The amplifier module is designed for TETRA (Terrestrial Trunked Radio) applications. It is housed in a surface mount package which measures 15 x 10 x 5.4 mm. Download Datasheet | Product Details
|
| | |
|
|  | Coaxial Termination from Aeroflex - Inmet The TSXXXM-100W is a 100 W, 50 Ohm termination with SMA Connectors. The termination is available in two frequency options - DC to 2.5 GHz and DC to 6 GHz. It can handle a peak power of up to 1 kW and has a VSWR of 1.2:1 @ DC to 1.5 GHz, 1.4:1 @ 2.5 to 6 GHz. This high power termination is also available with SMA female connectors. Download Datasheet | Product Details
|
| | |
|
|  | Switch from Planar Monolithics Industries The SWN-1170-4DT-SP is a SP4T absorptive switch that operates from 0.5 to 18 GHz. It has a low insertion loss of 3.75 dB and high isolation of over 70 dB through the band. The switch has a fast switching speed of 100 ns. It is available in a connectorized module with 2.92 mm connectors. It can be used for military and commercial applications. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from MECA The LPR2N-1.900-M01WWP is a 2 Way low PIM power divider that operates from 0.698 to 2.7 GHz. It can handle up to 700 W of power and has an insertion loss of 0.3 dB typically. The power divider has a PIM level of below -153 dBc (-165 dBc typically). It is available in a connectorized module with N Type - Female brass albaloy plated connectors. The divider operates at a temperature from -55° C to +85° C and weighs 10.2 oz. Download Datasheet | Product Details
|
| | |
|
|  | Fixed Attenuator from HASCO Components The HA18A5W-XX is a 5 Watt Fixed Attenautor that operates from DC to 18 GHz with Attenuation options from 1 to 40 dB (1-6 dB, 7-12 dB, 15 dB, 20 dB, 30 dB and 40 dB). The attenuator can handle up to 5 W of power and 500 W of peak power. It is available in a connectorized SMA package with an integrated head sink. The attenuator operates from -65°C to 125°C and is matched to 50 Ohms. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from HXI The HLNA Series from HXI is a series of low noise amplifiers which cover the frequency range from 20 to 100+ GHz. A wide varity of gain and bandwidth combinations are available to provide the designer with a solution for most applications. Custom designs are also available (NRE not required). These amplifiers can be used to lower system noise figure in communication and radar systems and also as gain blocks in LO chains and test equipment. Each LNA contains a voltage regulator and bias sequencing circuitry allowing the use of a single bias to power the amplifier. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Ophir RF The 7010 is a dual channel broadband system that that operates from 700 MHz to 6000 MHz in a single Antenna port. The system includes a RF high power switch controlled by the system controller. It provides a P1dB of 10 W min. @ Channel 1, a P1dB of 5 W min. @ Channel 2 and a saturated power of 15 W. A RS232/Ethernet and/or Front panel key-pad provides full control of the High Power Amplifier. The amplifier system reduces the power consumption to the minimum by shutting down the unselected channel. Download Datasheet | Product Details
|
| | |
|
|
