| Featured Products this Week . |
|
|
| 16-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-16 from Copper Mountain Technologies is a 16-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. It can measure all s-parameters and supports linear frequency, log frequency, segment, and power sweep types. This VNA has a measurement time of 24µs per point and can measure 2 to 500,001 points per sweep. It can fit a 19” rack and utilizes robust, durable port connectors with ergonomic positioning for simplified cable connection. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| High-Resolution Digital Attenuator from 0.1 to 40 GHz | |
RF Variable Attenuator
from Vaunix
|
| The Lab Brick® LDA-403 from Vaunix is a Solid-State Digital Attenuator that operates from 0.1 to 40 GHz. It has an attenuation range of 31.5 dB which can be controlled in 0.5 dB steps with a switching speed of 35 ns. This attenuator can handle an input power of 2 W and has an insertion loss of less than 9.5 dB. It is easily programmable for fixed attenuation, swept attenuation ramps, and fading profiles directly from the Graphical User Interface (GUI) or WebUI provided by Vaunix. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fixed Attenuator Series from DC to 18 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HF-XXX-25/18 from JFW Industries are Fixed Attenuators that operate from DC to 18 GHz. They are available in attenuation values from 3 to 40 dB and have a VSWR of less than 1.4:1. These attenuators can handle an average input power of 25 W and a peak input power of 500 W. They are available in modules with N-type, SMA, or TNC connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The BB60D from Signal Hound is a Spectrum Analyzer that operates from 9 kHz to 6 GHz. It streams 140 MB/sec of digitized RF signals to a PC over the USB 3.0 interface, providing an instantaneous bandwidth of 27 MHz, and sweeping at speeds of 24 GHz/sec. This analyzer performs spectrum analysis using the proprietary application programming interface (API) which can execute up to 1.2 million FFT spectrums or 320 million FFT points every second, delivering real-time spectrum data. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 W, Class-A Solid-State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The Model 500S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers more than 500 W of output power with a small signal gain of 64 dB. This Class-A SSPA provides protection from input overdrive beyond 0 dBm as well as protection from various failure conditions including over-temperature and power supply faults. |
| |
Download Datasheet
Product Details | |
|
|
| FREE eBook - Download Now! | | |
|
|
| 100 W Solid-State Power Amplifier from 6 to 10 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2053A-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 10 GHz. It delivers a saturated output power of 100 W with a gain of more than 50 dB. This Class A/AB linear amplifier has spurious levels of less than -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 100 MHz Sinewave TCXO for Timing Applications | |
TCXO
from Dynamic Engineers
|
| The TCXO1490BM-STR3-100MHz-A from Dynamic Engineers is a Temperature-Compensated Crystal Oscillator (TCXO) that operates at 100 MHz. It provides a sinewave output with an output power of 10 dBm and an SSB phase noise of -155 dBc/Hz (at 10 kHz offset). This TCXO has an operating temperature range of -40°C to +85°C and a frequency stability (vs operating temperature range) of ±0.28 ppm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Space-Qualified 6-Way Isolated Power Divider from 2.3 to 2.4 GHz | |
Power Divider
from Smiths Interconnect
|
| The SPD701 from Smiths Interconnect is a 6-Way Isolated Power Divider that operates from 2.3 to 2.4 GHz. It can handle a CW input power of up to 6 W, has an insertion loss of less than 9 dB, and an amplitude balance of ±0.7 dB. All channels of this splitter are phase and group delay matched and each channel includes a ferrite isolator on the output. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q200 Grade Mini Transformers from 1 MHz to 8.5 GHz | |
Balun
from Coilcraft
|
| The UWB Series from Coilcraft are Mini Transformers that operate from 1 MHz to 8.5 GHz. They have an inductance of 3.6 or 7.5 µH and an impedance ratio of 1:1, 1:2, or 1:4. These AEC-Q200 qualified mini transformers have an insertion loss of less than 1.5 dB and a maximum DCR of 71 mOhm. They can handle an RF input power of 1/4 W and have a maximum current rating of 250 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4 GHz CMOS Front-End Module for IoT Applications | |
Front End Module
from Skyworks Solutions
|
| The RFX2411N from Skyworks Solutions is a 2.4 GHz Integrated Front-End Module. This module has an architecture that integrates TX/RX and diversity switching circuitry with PA, LNA, and the associated matching networks on a single-chip CMOS device. It also includes a bypass mode to provide maximum flexibility for system implementations. |
| |
Download Datasheet
Product Details | |
|
|
|
| mmWave Bandpass Filter with Passband from 27.5 to 29.5 GHz | |
Band Pass Filter
from Johanson Technology
|
| The 28R0BP39A2000 from Johanson Technology is a Bandpass Filter with a passband from 27.5 to 29.5 GHz. It can CW input power of up to 1 W, has a passband insertion loss of less than 2.3 dB, and provides more than 20 dB of attenuation above and below the passband. This filter is available in a surface-mount ceramic package that measures 2.50 x 2.00 x 0.90 mm and has an operating temperature range from -40°C to +85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| mmWave SP4T Switch from DC to 40 GHz | |
RF Switch
from MI-WAVE
|
| The 914-0/40/KF/TTL from Millimeter Wave Products is an SP4T Switch that operates from DC to 40 GHz. It has a rise/fall time of 10 ns, provides isolation of 30 dB and an insertion loss of 4 dB. The switch requires a DC supply from 6 to 8 V and consumes 80 mA of current. It is available in a module with 2.92 mm (female) connectors and is ideal for 5G Systems, test set, radar & astronomy systems, RF communication systems, test equipment & labs, and switching network applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Quadrature Hybrid Coupler from 2 to 8 GHz | |
90 Degree Hybrid Coupler
from Innovative Power Products
|
| The IPP-7093 from Innovative Power Products is a Quadrature Hybrid Coupler that operates from 2000 to 8000 MHz. It can handle an input power of 50 W, provides an isolation of more than 15 dB, and has an insertion loss of less than 0.8 dB. This coupler has an amplitude balance of ±0.65 dB and a phase balance of ±8°. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| UHF/VHF Versatile Software-Defined Transceiver for Military Applications | |
Software Defined Radio
from General Dynamics Mission Systems
|
| The URC-300® from General Dynamics is a Software-Defined Transceiver that operates in the UHF/VHF bands (with optional 30-90 MHz frequency band extension). It operates from 115 – 150 MHz (AM), 115 – 173.995 MHz (FM) and 225 – 399.9995 MHz (AM and FM). This transceiver offers versatile VHF/UHF AM and FM capability to provide interoperability with a variety of RF systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 74 cm Auto-Acquiring Driveaway SATCOM Antenna from 17.7 to 30 GHz | |
SATCOM Antenna
from C-COM
|
| The iNETVu Ka-74G from C-COM is a Driveaway Antenna that operates in the Ka-Band from 17.7 – 20.2 GHz (Rx) and 28.1 – 30 GHz (Tx). It has a 74 cm elliptical reflector and supports 3-axis motorization with an azimuth range of 360° and an elevation range from 0° to 90°. This satellite antenna system has an auto-switching circular polarization (RH or LH) and includes a button and auto-pointing controller which acquires a Ka-band satellite within 2 minutes. |
| |
Download Datasheet
Product Details | |
|
