| New RF and Microwave Products this Week . |
|
|
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RF Downconverter Extends Existing RF Test Equipment to 40 GHz | |
Down Converter
from ThinkRF
|
| The D4000 from thinkRF is an RF Downconverter/Tuner that lets you extend your existing RF test equipment to 40 GHz. It downconverts an Input RF signal from 24 - 40 GHz to an output IF signal with a frequency of 1.536 GHz. The downconverter has a compact and light weight design that makes it ideal for applications such as interference hunting, electronic warfare, signals intelligence, spectrum monitoring, RF drive test, transmission test, and customer premise equipment test. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| LTE Cat 1 bis Module for M2M/IoT Applications in North America | |
Cellular Module
from Quectel
|
| The EG800Q-NA from Quectel is an LTE Cat 1 bis Module that is based on 3GPP Rel-14 LTE technology. It delivers a downlink data rate of up to 10 Mbps and an uplink data rate of 5 Mbps. This module is powered by the Qualcomm® QCX216 LTE IoT modem and supports LTE-FDD coverage, DFOTA, and Wi-Fi Scan. It has a single antenna and is designed for customers in the North American region. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by AOC | | AOC 2023: 60th Annual AOC International Symposium & Convention | | MARK YOUR CALENDAR and join us for three full days of informative and engaging keynote sessions, breakout discussions, and tech talks at AOC 2023, AOC’s Annual International Symposium & Convention. This leading event for electronic warfare, electromagnetic spectrum operations, cyber-electromagnetic activities, and information operations professionals worldwide is taking place this December. Click here to learn more. | | | |
|
|
| High-Current Power Inductors from 23.5 to 146 nH | |
RF Inductor
from Coilcraft
|
| The 1010VS Series from Coilcraft are Power Inductors available in inductance values from 23.5 to 146 nH. They have a Q factor from 95 to 140 and DC resistance (DCR) from 1.1 to 3.1 mO. These inductors can handle up to 26 A of current. They are available in surface-mount packages that measure 10.0 x 10.0 mm with tin-silver over copper terminations and are also available in high-reliability packages for space, military, and other critical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTCC Bandpass Filter with Passband from 17.5 to 22.2 GHz | |
Band Pass Filter
from Mini Circuits
|
| The BFHKI-1982+ from Mini-Circuits is an LTCC Bandpass Filter that has a passband from 17.5 to 22.2 GHz. It has a passband insertion loss of less than 4.9 dB, provides a stopband rejection of up to 65 dB, and can handle an input power of up to 1 W. This filter has an integrated interposer board that enables installation onto PCBs with automated manufacturing equipment making it suitable for high-volume processes. |
| |
Download Datasheet
Product Details | |
|
|
|
| 67 GHz Colour-Coded, Flexible Low-Profile Cable Assemblies | |
RF Cable Assembly
from Maury Microwave
|
| The Stability Plus™ Low Profile Cable Assemblies from Maury Microwave operate up to 67 GHz. They provide the same electrical performance as Maury Microwave’s ruggedized StabilityPlus™ cables, but with a more compact and flexible design. These cable assemblies have excellent phase and amplitude stability with flexure that enables highly reliable and repeatable measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4 mm In-Series Precision Adapters from DC to 50 GHz | |
In Series RF Adapter
from San-tron
|
| The 4210 Series from San-tron are 2.4 mm Precision Adapters that operate from DC to 50 GHz. These in-series adapters are available in female to female, male to male and female to male configurations. They are matched to 50-ohms and have high-performance gold-plated beryllium copper contacts, polyetherimide (PEI) capture beads, rugged stainless-steel bodies and can withstand 500 mating cycles. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W Multi-Purpose Solid-State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 250S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a saturated output power of more than 250 W with small-signal gain of 61 dB. The amplifier has a Class A design, making it suitable for EMC test applications where continued operation into high VSWR loads including open and short circuits is required. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 40 W Rackmount Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP4037BDB-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/pulsed saturated output power of 40 W with a power gain of more than 46 dB. This amplifier has a class A/AB linear design with built-in protection circuits such as input power protection (up to +10 dBm) and load VSWR protection. |
| |
Download Datasheet
Product Details | |
|
|
|
| White Gaussian Noise Source from 10 MHz to 10 GHz | |
Noise Source
from Noisecom
|
| The NC1128A from Noisecom is a White Gaussian Noise Source that operates from 10 MHz to 10 GHz. It produces white Gaussian noise with an output power of -17 dBm and has a noise output of -117 dBm/Hz. This noise source has low power with a high crest factor for signal impairment applications. It requires a DC supply of +15 V and consumes less than 250 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Shield Test Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1070-C from RF Electronics is an RF Shield Test Box for frequencies from 20 MHz to 12 GHz. It has thick RF absorbing foam which deadens standing waves and reflections and provides shielding of more than 90 dB across the frequency range. This test box is equipped with shielded power filters for power connection in the box while still blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Low Noise Amplifier from 1 to 18 GHz | |
RF Amplifier
from AmpliTech
|
| The APTMP4-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. It provides more than 35 dB of gain with a noise figure of less than 1.5 dB and a P1dB of 20 dBm. The LNA is fabricated using state-of-the-art PHEMT technology and is MIL-883 and MIL-45208 certified. It has internal DC regulators which allow DC supply from 11 to 24 V and consumes less than 350 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Fixed Attenuators from DC to 18 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HFFA-XXX-2/18 Series from JFW Industries are Fixed Attenuators that operate from DC to 18 GHz. They are available in attenuation values from 1 to 30 dB (any 1 dB increment) and have a VSWR of less than 1.4:1. These attenuators can handle an average input power of up to 2 W and a peak input power of 100 W (5 µs pulse, 0.1% duty cycle). |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W High-Efficiency GaN Amplifier from 2.4 to 2.5 GHz | |
RF Transistor
from Gallium Semiconductor
|
| The GTH2e-2425300P from Gallium Semiconductor is a GaN-on-SiC Amplifier that operates from 2.4 to 2.5 GHz. It delivers a CW output power of 300 W with a gain of 17 dB and has an efficiency of up to 76%. This amplifier has been designed to simplify the integration into various systems, enhancing the development process of RF engineers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 220 W Electromechanical Failsafe SPDT Switch from DC to 12.4 GHz | |
RF Switch
from Talent Microwave Inc
|
| The R12-NFXX012 from Talent Microwave is an Electromechanical Failsafe SPDT Switch that operates from DC to 12.4 GHz. It has a switching speed of less than 20 ms and provides more than 80 dB of isolation. This switch can handle a CW input power of up to 220 W and has an insertion loss of less than 0.50 dB. It requires a DC actuator supply from 12 to 28 V and consumes less than 130 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W, 90° Hybrid Coupler from 0.5 to 1.1 GHz | |
90 Degree Hybrid Coupler
from MECA
|
| The 705S-0.800 from MECA is a 90° Hybrid Coupler that operates from 0.5 to 1.1 GHz. This 3.1 dB coupler provides 30 dB of isolation and has a frequency sensitivity of ±0.6 dB. It can handle an average power of 50 W and a peak input power of 3 kW. The coupler is available in a module that measures 3.06 x 1.25 x 0.38 inches and has SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-polarized, Quad-Ridge Horn Antenna from 0.8 to 3 GHz | |
Horn Antenna
from Fairview Microwave
|
| The FMWAN1166 from Fairview Microwave is a Quad-Ridge Horn Antenna that operates from 0.8 to 3 GHz. This dual polarized antenna provides 7 dBi of gain with a typical VSWR of 1.50:1. It can be used in a wide variety of applications due to its high-power handling capability, low loss, high directivity, and near-constant electrical performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50-Ohm Low-Loss RF Balun from 3 to 18 GHz | |
Balun
from mmTron Inc
|
| The TMC811-1 from mmTron is an RF Balun that operates from 3 to 18 GHz. It converts a balanced signal to an unbalanced signal and vice-versa with a phase balance of 1° and an amplitude balance of 0.4 dB. This 50-ohm balun is fabricated using a high-power, high-Q GaAs process and exhibits low-loss, tight gain, phase matching, and high-power handling capabilities. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular and Rugged Tri-Band VSAT Terminal from 19.2 to 31 GHz | |
VSAT Terminal
from ARA
|
| The Saterra from ARA is a Tri-Band VSAT Terminal System that operates from 29 to 31 GHz (Tx) and 19.2 to 21.2 GHz (Rx). It has four reflectors (0.6 m, 0.8 m, 1.0 m, and 1.3 m), a modular feed horn, integrated RF components, AutoAQYR (acquisition), and tripods. This SATCOM terminal offers modularity, allowing designers to change either the band or aperture size in less than five minutes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Weatherproof Low Noise Amplifiers from 18.2 to 21.2 GHz | |
SATCOM Amplifier System
from Advantech Wireless Technologies
|
| The ALNA-Ka Series from Advantech Wireless are Low Noise Amplifiers that operate in the Ka-Band from 18.2 to 21.2 GHz. They provide a gain of 50 dB with noise temperature from 100K to 120K (at 23°C with input isolator) and have a gain variation over the operating temperature range of 3 dB (peak to peak). These LNAs are based on HJ FET technology and deliver high linearity in weather-proof housing that can withstand installations in severe environmental conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Transceiver Module from 71 to 86 GHz for High-Power E-band Links | |
RF Transceiver
from Filtronic
|
| The Hercules II from Filtronic is an E-band Transceiver Module that operates from 71 to 76 (Tx) GHz and 81 to 86 GHz (Rx). It combines Filtronic’s Morpheus II transceiver and a Cerus SSPA module. Each Morpheus module contains all the transmit and receive functions necessary for the RF section of an E-band link and provides a simple connection to a high data rate full duplex modem. |
| |
Download Datasheet
Product Details | |
|
