| New Satellite & Space Products . |
|
|
| 50 W GaN Solid-State Power Block Upconverter from 13.75 to 14.5 GHz | |
Block Up Converter
from Communications & Power Industries
|
| The CPKOG1430SOTM from Communications & Power Industries is a Solid-State Power Block Upconverter (SSPB) that converts an input frequency (IF) from 950-1700 MHz to an output frequency (RF) from 13.75-14.50 GHz. It delivers an output power of 50 W (~ +47 dBm) with a gain of more than 53 dB. This SSPB has a phase noise (LO) of -78 dBc/Hz (at 1 kHz offset) and spurious emissions and harmonics of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ku-Band Block-up Converters from 12.75 to 14.5 GHz | |
Block Up Converter
from Amkom Design Group Inc
|
| The ASKU (S, L, D) Series from Amkom Inc. are Ku-Band Block-up Converters that convert an input IF frequency from 950 - 1450 MHz or 950 - 1700 MHz to an output RF frequency from 12.75-14.5 GHz with 11.80 GHz, 13.05 GHz or 12.80 GHz local oscillators. These BUCs deliver a saturated output power of 20 W (43 dBm) and a linear power of 16 W (42 dBm) with a gain of 70 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 W GaN Block Upconverter from 17.3 to 18.4 GHz | |
Block Up Converter
from Actox
|
| The ABE25UDBS from Actox is a DBS-Band Block Upconverter that converts input frequencies from 950 – 1700 MHz to output frequencies from 17.3 – 18.4 GHz. It has a 16.35 / 16.85 GHz dual LO that is electronically and manually switchable. This GaN BUC delivers an output power of 25 W (+44 dBm) with a gain of 68 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Weatherproof Low Noise Amplifiers from 18.2 to 21.2 GHz | |
SATCOM Amplifier System
from Advantech Wireless Technologies
|
| The ALNA-Ka Series from Advantech Wireless are Low Noise Amplifiers that operate in the Ka-Band from 18.2 to 21.2 GHz. They provide a gain of 50 dB with noise temperature from 100K to 120K (at 23°C with input isolator) and have a gain variation over the operating temperature range of 3 dB (peak to peak). These LNAs are based on HJ FET technology and deliver high linearity in weather-proof housing that can withstand installations in severe environmental conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka-Band Low Noise Amplifier from 20.2 to 21.2 GHz for SATCOM Applications | |
SATCOM Amplifier System
from TTI
|
| The TTI-Ka-LNA-2021 from TTi is a Low Noise Amplifier (LNA) that operates in the Ka-Band from 20.2 to 21.2 GHz. It provides a gain of more than 50 dB with a noise figure of less than 1.4 dB (noise temperature of better than 110 K) and has an output P1dB of more than 10 dBm. This LNA uses cutting-edge technology to provide excellent performance for outdoor operations in commercial and defense SATCOM applications. |
| |
Download Datasheet
Product Details | |
|
|
| FREE eBook - Download Now! | | |
|
|
| Block Downconverter from 27 - 29.5 GHz for Profession/Military Applications | |
Low Noise Block
from ACORDE
|
| The ACCVR-KaL-E29-V4 from ACORDE is a Block Downconverter (BDC) that converts input frequencies from 27 - 29.5 GHz to output frequencies from 950 - 2450 MHz. It provides a gain of 30 dB with a noise figure of less than 15 dB and has a phase noise of -125 dBc/Hz (@1 MHz offset). This downconverter provides an image rejection of more than 45 dB, has an output P1dB of 10 dBm, and in-band spurious emission of better than -50 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 325 W Antenna-Mount Power Amplifiers from 27 to 31 GHz | |
SATCOM Amplifier System
from Comtech Xicom Technology
|
| The XTD-750KaL from ComTech are Antenna-Mount High Power Amplifiers that operate from 27 to 31 GHz. They deliver a CW output power of 325 W (~55.1 dBm) with a small signal gain of more than 70 dB. These amplifiers have spurious levels and harmonics of -60 dBc. They are designed to offer compactness, low-cost installation, and a long life. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Airborne, Electronically Steerable SATCOM Antenna from 10.7 to 14.5 GHz | |
SATCOM Antenna
from Get SAT Ltd
|
| The Lesa Blade Ku Aero from Get SAT is an Airborne SATCOM Antenna that operates from 10.7 to 12.75 GHz (Rx) and 13.75 to 14.5 GHz (Tx). This low-profile fully electronically steerable antenna (ESA) has no moving parts and is ideal for integration on any aviation platform. It is designed for in-flight connectivity with a short acquisition time and allows for high dynamic tracking. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Modular and Rugged Tri-Band VSAT Terminal from 19.2 to 31 GHz | |
VSAT Terminal
from ARA
|
| The Saterra from ARA is a Tri-Band VSAT Terminal System that operates from 29 to 31 GHz (Tx) and 19.2 to 21.2 GHz (Rx). It has four reflectors (0.6 m, 0.8 m, 1.0 m, and 1.3 m), a modular feed horn, integrated RF components, AutoAQYR (acquisition), and tripods. This SATCOM terminal offers modularity, allowing designers to change either the band or aperture size in less than five minutes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2.2 m Multiband VSAT System from 3.4 to 31 GHz for Marine Applications | |
SATCOM Terminal
from Orbit Communication Systems
|
| The OceanTRx 7 from Orbit Communication Systems is a Multiband Stabilized Maritime VSAT System that operates from 5.85 to 31 GHz (Tx) and 3.4 to 21.2 GHz (Rx). It has a dual offset Gregorian antenna type with an antenna size of 2.2 m. This VSAT consists of electronically switchable C/Ka and Ku/Ka multiband terminals to provide customers with unprecedented flexibility, enabling hybrid GSO and MEO/LEO interoperability. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cost-effective, High-performance, Space-Qualified Master Crystal Oscillator | |
OCXO
from Safran Electronics & Defense
|
| The LNMO from Safran is a Space Qualified Crystal Oscillator with a frequency of 10 MHz (frequencies from 5 to 40 MHz available upon request). It produces an output signal of 7 dBm with an SSB phase noise of -140 dBc/Hz @ 1 kHz offset and frequency stability of ± 1x10-9 over a wide temperature range. The oscillator has a standard warm-up time of 10 minutes and a fast warm-up time of 5 minutes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Low Noise Amplifier from 1 to 6 GHz for Space Applications | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA002093SEP from Teledyne e2v HiRel Electronics is a low noise amplifier developed for high-reliability space and radar applications. The LNA operates from 1 to 6 GHz and provides 21 dB of gain with a noise figure 0.37 dB and has a P1dB of 19 dBm. The device utilizes application-specific biasing and can be biased over a VDD range of 2.7 to 5.0 volts and an IDDQ range of 30 mA to 100 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W Space-Qualified Hybrid Coupler from 71 to 76 GHz | |
Waveguide Coupler
from Smiths Interconnect
|
| The 26WC404 from Smiths Interconnect is a Space-Qualified Hybrid Coupler that operates from 71 to 76 GHz. It can handle a CW input power of up to 100 W (1 W load fitted). This 2 x 1 hybrid coupler has an insertion loss of less than 0.4 dB and provides an isolation of more than 23 dB. It is designed for space and terrestrial environments and is qualified for environmental stress screening capability including mechanical shock, sine/random vibration, and humidity testing. |
| |
Download Datasheet
Product Details | |
|
|
|
| TVAC RF Isolator from 10.7 to 14.8 GHz | |
RF & Microwave Isolator
from DiTom Microwave
|
| The DVI1014 from DiTom Microwave is a TVAC RF Isolator that operates from 10.7 to 14.8 GHz. It provides an isolation of more than 20 dB and has an insertion loss of less than 0.3 dB. This isolator can handle an average input power of 10 W, peak input power of 50 W, and reflective power of 2 W. It is available as a module with low outgassing that measures 0.455 x 0.500 x 0.700 inches and has SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
