| New RF and Microwave Products this Week . |
|
|
| 1-Port USB Vector Network Analyzer from 1 MHz to 6 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R60 is a single port USB-powered VNA (Reflectometer) capable of measuring S11 from 1 MHz to 6.0 GHz. It can be operated with any Windows PC or laptop using a USB cable. The R60 provides a wide variety of analysis capabilities, including S11, time-domain with gating, DTF measurements and much more. Collection of metrology-grade S-parameters test results can be achieved manually or through automation in Python, MATLAB, Excel, C++, VB.NET, or LabVIEW. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microwave Upconverter + Downconverter from 37 to 50 GHz for mmWave 5G Radios | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1139A from Analog Devices is a Silicon-on-Insulator (SOI), Microwave, Upconverter, and Downconverter with an RF Frequency from 37 to 50 GHz. It integrates an upconverter (transmitter), a downconverter (receiver), and a LO chain with a 4x multiplier in one chip. This Upconverter / Downconverter is ideal for Millimeter-wave 5G applications, Point to point microwave radios, Radar and electronic warfare systems
and Instrumentation and automatic test equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3x Frequency Multiplier MMIC from 30 to 60 GHz | |
Frequency Multiplier
from Mini Circuits
|
| The CY3-64-D+ from Mini-Circuits is a 3x Frequency Multiplier that converts input frequencies from 10 – 20 GHz to output frequencies from 30 – 60 GHz. It can handle an input power of up to 22 dBm and has a conversion loss of less than 23.8 dB. This frequency multiplier utilizes GaAs HBT technology and achieves +30 dBc or better fundamental and close-in (second and fourth) harmonic suppression. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Flexible, Armoured Microwave Cable Assembly from DC to 40 GHz | |
RF Cable Assembly
from HUBER+SUHNER
|
| The SUCOFLEX 540S from HUBER+SUHNER is a Flexible and Armoured Microwave Cable Assembly that operates from DC to 40 GHz. It is available with 2.9 mm or 2.4 mm connectors and is designed to provide an ideal solution for precise measurements in critical laboratory conditions. This 50-ohm cable assembly delivers high phase- and amplitude stability with flexure and movement and has a unique design that ensures zero spring back and facilitates efficient handling during measurement |
| |
Download Datasheet
Product Details | |
|
|
|
| 8kW 16-Way E-Plane Waveguide Combiner from 5.3 to 5.9 GHz | |
Waveguide Combiner / Divider
from Werlatone Inc
|
| The D11839 from Werlatone is a 16-Way E-Plane Waveguide Power Combiner that operates from 5.3 to 5.9 GHz. It can handle a CW input power of 8000 W and has an insertion loss of less than 0.15 dB. The combiner implements Werlatone’s architecture that is ideally suited for emerging high-power/high duty cycle solid-state radar requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 10 dB Directional Coupler from 380 to 960 MHz | |
Directional Coupler
from MECA
|
| The 715-10-0.670 from MECA is a Directional Coupler that operates from 380 to 960 MHz. This 10 dB coupler has a directivity of more than 25 dB and an insertion loss of less than 0.1 dB. It can handle an average input power of 25 W and a peak input power of 10 kW. This RoHS-compliant coupler is available in a module that measures 6.08 x 2.25 x 0.88 inches with N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel Vector Signal Generator from 9 kHz to 8.5 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5186A MXG from Keysight Technologies is a 4-channel Vector Signal Generator with a frequency range from 9 kHz to 8.5 GHz. It delivers an output power of up to +27 dBm with a phase noise of -147 dBc/Hz (at 10 kHz offset) and has a frequency resolution of 1 x 10-5 Hz. This signal generator is capable of generating signals with a modulation bandwidth of 960 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W Rackmount Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2145A-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/pulsed output power of 15 W with a power gain of more than 40 dB and a gain adjustment range of 20 dB. This amplifier has a Class A/AB linear design with a 2-tone intermodulation (IMD) of -30 dBc, harmonics of less than -20 dBc, and spurious of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Real-Time Peak Power Sensor from 50 MHz to 40 GHz | |
RF Power Meter & Sensor
from Boonton
|
| The RTP5006 from Boonton is a Real-Time Peak Power Sensor that operates from 50 MHz to 40 GHz. It has a dynamic range from -60 dBm to +20 dBm and a pulse width of more than 10 ns. This power sensor offers excellent performance with wide video bandwidth, fast rise times, fine time resolution, narrow minimum pulse widths, and good measurement reading rates. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wire-wound Ferrite Chip Inductors from 11 nH to 22 µH | |
RF Inductor
from Coilcraft
|
| The 0805AF Series from Coilcraft are Wire-wound Chip Inductors available with inductance values from 11 nH to 22 µH. They feature ferrite core construction and heavy gauge wire for high current handling and broadband filtering. These inductors have a tight standard tolerance of ±5% on all values. These chip inductors measure 2.29 x 1.73 x 1.52 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W Chip Termination from DC to 12 GHz | |
Termination
from Inmet by Spectrum Control
|
| The 12NPC50-100EG from Inmet by Spectrum Control is a Chip Termination that operates from DC to 12 GHz. It can handle an average input power of 20 W and has a VSWR of less than 1.15:1. This 50-ohm (optional 100-ohm) termination chip measures 2.54 x 1.27 x 0.38 mm. It has a Beryllium Oxide substrate with Tentalum Nitride resistor material and gold terminal finish. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Fixed Attenuators from DC to 40 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HFFB-XXX-5/40 from JFW Industries are Fixed Attenuators that operate from DC to 40 GHz. They are available in attenuation values from 1 to 10 dB, 20 and 30 dB with an attenuation accuracy of ±1.3 dB. These attenuators can handle a bi-directional RF input power of 5 W and have a VSWR of less than 1.25:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Low-Noise GPS/GNSS Disciplined Rubidium Oscillator | |
GPS/GNSS Disciplined Oscillator
from Safran Electronics & Defense
|
| The SRO-5680 from Safran is a low noise Disciplined Rubidium Oscillator that integrates complex synchronization functionality in a low-cost, super-small package that is EMI-shielded and rugged. It utilizes Safran’s SmarTiming+® technology to provide a host of integrated GPS/GNSS disciplining and timing features. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation Tolerant TCXOs from 40 MHz to 100 MHz | |
TCXO
from Greenray Industries
|
| The T1282 Series from Greenray Industries are Radiation Tolerant TCXOs with a nominal frequency from 40 MHz to 100 MHz. They have ultra-low acceleration sensitivity for reliable phase noise performance in high-vibration and shock-sensitive applications. A precision thermistor network provides temperature compensation insensitive to radiation - and can handle up to 50 krad (Si) total ionizing dose. |
| |
Download Datasheet
Product Details | |
|
|
|
| MEMS Based Holdover OCXO from 60 to 220 MHz | |
OCXO
from SiTime
|
| The SiT5812 from SiTime is a MEMS based Oven-Controlled Crystal Oscillator that operates from 60 to 220 MHz. It provides LVCMOS or clipped sinewave output with a frequency stability of ±1 ppb (from -40 to 95°C). This oscillator has a frequency slope of ±0.01 ppb/°C to ensure system-level quality of service for telecom and networking equipment in hostile environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Ultra-Low Noise Amplifier from 1 to 6 GHz for Space Applications | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA002093SEP from Teledyne e2v HiRel Electronics is a low noise amplifier developed for high-reliability space and radar applications. The LNA operates from 1 to 6 GHz and provides 21 dB of gain with a noise figure 0.37 dB and has a P1dB of 19 dBm. The device utilizes application-specific biasing and can be biased over a VDD range of 2.7 to 5.0 volts and an IDDQ range of 30 mA to 100 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W High-Efficiency GaN Amplifier from 2.4 to 2.5 GHz | |
RF Transistor
from Gallium Semiconductor
|
| The GTH2e-2425300P from Gallium Semiconductor is a GaN-on-SiC Amplifier that operates from 2.4 to 2.5 GHz. It delivers a CW output power of 300 W with a gain of 17 dB and has an efficiency of up to 76%. This amplifier has been designed to simplify the integration into various systems, enhancing the development process of RF engineers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Bandpass Filter with Passband from 2 to 18 GHz | |
Band Pass Filter
from Knowles
|
| The B100MH0W from Knowles is a Band Pass Filter with a passband from 2 to 18 GHz. It has a passband insertion loss of less than 2 dB and provides up to 60 dB of rejection below the passband and 35 dB of rejection above the passband. This filter utilizes integrated Quasi-lumped planar custom designs and is pre-configured for wire bonding. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Sub-Octave Switch Filter Bank from 2 MHz to 8 GHz | |
Switched Filter Bank
from ATEK MIDAS
|
| The ATEK950P6 from ATEK MIDAS is a Sub-Octave Switch Filter Bank that operates from 2 to 8000 MHz. It consists of an SP8T switch followed by 7 fixed frequency bandpass filters which are followed by another SP8T switch. Each SP8T switch is used to send the input/output signals to 2 pins. This allows users to bypass the filter bank off-chip. |
| |
Download Datasheet
Product Details | |
|
|
|
| Linearly-Polarized, Double-Ridged Horn Antenna from 14 to 110 GHz | |
Horn Antenna
from RF SPIN
|
| The DRH110 from RF SPIN is a Double-Ridged Horn Antenna that operates from 14 to 110 GHz. This linearly polarized antenna has an antenna factor from 44.3 to 53.5 dB/m and a VSWR of less than 2.1:1. It can handle a CW input power of 4 W and a peak input power of 8 W. The antenna exhibits low return loss over a wide operating bandwidth and is individually calibrated to cover the 5G frequency band. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-10 Waveguide to 1.0 mm (Female) Adapter from 75 to 110 GHz | |
Waveguide to Coax Adapter
from Spinner Group
|
| The 533112 from SPINNER is a R900 / WR-10 to 1.0 mm Waveguide to Coaxial Adapter that operates from 75 to 110 GHz. This adapter is characterized by its excellent low IM values and its longevity for test and measurement laboratories. It has a return loss of 20 dB. The adapter has a CuBe center, and an outer conductor and utilizes PEI insulation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electric Field Probe from 10 MHz to 40 GHz for Isotropic Measurements | |
Near Field Probe
from Raditeq B.V.
|
| The RadiSense® RSS2040S from Raditeq is a High-Frequency E-field probe that operates from 10 MHz to 40 GHz. This probe has an isotropic E-field measurement range from 1 to 1000 V/m and a measurement resolution of 0.1 V/m (from 100-1000 V/m). It can conduct measurements at a speed of 100 measurements/second (individual X-Y-Z axis + isotropic value) and offers an accurate frequency response. |
| |
Download Datasheet
Product Details | |
|
