| New 5G Products . |
|
|
| 63 W GaN Power Amplifier from 3.4 to 3.8 GHz for 5G mMIMO Applications | |
RF Amplifier
from Mitsubishi Electric US, Inc.
|
| The MGFS48G38MB from Mitsubishi Electric is a GaN Power Amplifier that operates from 3.4 to 3.8 GHz. It delivers a saturated output power of more than 63 W with a gain of over 28 dB and a power-added efficiency (PAE) of 43%. This power amplifier has an epitaxial growth layer structure that offers high efficiency and low distortion characteristics even when used in 5G environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Front-End Module for Dual-Channel Receiver from 2.3 to 2.7 GHz | |
Front End Module
from NXP Semiconductors
|
| The BTS7202H from NXP Semiconductors is a Dual Channel Receiver Front-End Module that operates from 2.3 to 2.7 GHz. It has two independent receive channels each with a low noise amplifier (LNA) and a switch to route high-power TX signals to a termination load. This SiGe module provides a gain of 19 dB in low gain mode, 37 dB in high gain mode, and has a noise figure of 0.95 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sub-6 GHz 5G-NR Module for Middle East and Africa Markets | |
Cellular Module
from Fibocom
|
| The FG360-MEA from Fibocom is a 5G NR Sub-6 GHz Module that has been designed for the Middle Eastern and African market. It supports both 5G standalone (SA) and non-standalone (NSA) network architectures, delivering enhanced transmission speed, greater carrying capacity, and reduced network latency for homes, businesses, and mobile users. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | | |
|
|
|
|
|
|
|
| Modular Signalling Test Solution for 5G FR1 and FR2 | |
RF Test Set
from LitePoint
|
| The IQcell-5G from LitePoint is a 5G FR1/FR2 Signalling Test Solution that is designed for end-of-line manufacturing, software regression and functional performance testing. It validates RF parametric measurements, end-to-end throughput, MIMO, mobility, and user experience testing across cellular and cellular-capable connectivity devices such as smartphones, CPE’s, laptops, tablets, hotspots, etc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel Vector Signal Generator from 9 kHz to 8.5 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5186A MXG from Keysight Technologies is a 4-channel Vector Signal Generator with a frequency range from 9 kHz to 8.5 GHz. It delivers an output power of up to +27 dBm with a phase noise of -147 dBc/Hz (at 10 kHz offset) and has a frequency resolution of 1 x 10-5 Hz. This signal generator is capable of generating signals with a modulation bandwidth of 960 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Low-Cost, Beam-steering RF Module from 57 to 71 GHz for FWA Applications | |
RF Module
from Sivers Semiconductors
|
| The BFM06017 from Sivers Semiconductors is a Low-Cost RF Module that operates from 57 to 71 GHz. It supports 1D beam-steering (±45° steering in azimuth) and is optimized for high-performance FWA applications and for unlicensed 5G spectrum (802.11ad and 5G NR-U, TDD). This module has a 16+16 Tx/Rx array and enables up to 256 QAM SC (Single-carrier) with an integrated synthesizer to support a throughput of 10 Gbit/s. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Surface-Mount Attenuator MMIC from DC to 50 GHz | |
Fixed Attenuator
from Marki Microwave
|
| The ATN10-0050CSP1 from Marki Microwave is an Attenuator MMIC that operates from DC to 50 GHz. It can handle an input power of 1 W, provides an attenuation of 10 dB, and has an insertion loss of less than 10 dB. This GaAs MMIC is suitable for 5G, amplitude matching, test equipment, high channel count systems, and airborne applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W Directional Coupler from 6 to 40 GHz for 5G Applications | |
Directional Coupler
from MECA
|
| The 750-20-23.000 from MECA is a directional coupler that operates from 6 to 40 GHz. It has a coupling value of 20 dB and can handle up to 20 W of input power. This coupler has an insertion loss of less than 1.3 dB and a directivity of more than 12 dB. It is available in a module with 2.40 mm female connectors and comes with a 36-month manufacturer warranty. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 GHz SP4T Switch for Massive MIMO 4G/5G Base Stations | |
RF Switch
from pSemi, A Murata Company
|
| The PE42446 from pSemi is an SP4T Switch that operates from 10 MHz to 8 GHz. It provides more than 60 dB of isolation to prevent interference and maintain signal integrity and has a switching time of 250 ns. This switch integrates seamlessly into 4G and 5G base stations and massive MIMO architecture and provides digital pre-distortion (DPD) feedback loops and transmitter monitoring signal paths. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G-NR Low-Noise Diversity Receive Module from 3.3 to 4.2 GHz | |
Front End Module
from Skyworks Solutions
|
| The SKY53761-11 from Skyworks is a 5G NR Diversity Receive Module that operates in the n77/78 bands from 3.3 to 4.2 GHz. It utilizes the latest advanced SOI process technologies to achieve exceptional high-bandwidth, low-noise figure (NF) LNA performance. This module has integrated multi-mode, variable gain LNA that works with all 5G chipsets. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G Antenna Module from 24.25 to 27.5 GHz with Built-in Front-End Module | |
Front End Module
from Doosan Corporation Electro-Materials
|
| The DS-MV_26 from Doosan Corporation is a 5G Antenna Module that operates from 24.25 to 27.5 GHz. This dual polarized (horizontal/vertical) antenna module has an EIRP of 38 dBm and an azimuth/elevation beam scan range of ±60°. It provides 48 dB of gain in Tx mode and 42 dB of gain in Rx mode. The antenna module incorporates an RF front-end module with a 32-array antenna and beamforming IC. |
| |
Download Datasheet
Product Details | |
|
|
|
| 65 GHz Ganged SMPM Cable Assembly for 5G Applications | |
RF Cable Assembly
from Samtec
|
| The Magnum RF™ GC86 from Samtec is a Ganged, Multi-Position SMPM Cable Assembly that operates up to 65 GHz. It has 0.086-inch low-loss flexible microwave/millimeter wave cables with a minimum bend radius of 8.9 mm. This cable assembly has a high-density, space-saving design with a single row of connectors and a push-on interface for quick installation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 GHz mmWave Flex-to-Board PCB Headers for 5G Applications | |
RF Connector
from MOLEX
|
| The 2188770062 from Molex are mmWave Flex-to-Board PCB Headers that have been designed to support frequency signals up to 25 GHz. They can handle a current of up to 1.0 A per contact and has a dielectric withstanding voltage of 250 V (AC). These board connectors can withstand up to 10 mating cycles and enable the high-speed transfer of RF signals while offering space savings and mechanical robustness. |
| |
Download Datasheet
Product Details | |
|
