| Featured Products this Week . |
|
|
| Rectangular Waveguide Circulator from 18 to 26.5 GHz | |
Waveguide Circulator
from Scientific Microwave Corporation
|
| The SMC-020042 from Scientific Microwave Corporation is a Rectangular Waveguide Circulator that operates from 18 to 26.5 GHz. It has an insertion loss of 0.4 dB and an isolation of 15 dB. This circulator is available in a module with a WR-42 interface and is suitable for use in RF source protection, radar systems, and satellite applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Real-Time Spectrum Analyzer from 100 kHz to 43.5 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The SM435B from Signal Hound is a real-time spectrum analyzer and monitoring receiver that operates from 100 kHz to 43.5 GHz. It has 160 MHz of instantaneous bandwidth, a dynamic range of 110 dB, 1 THz/sec sweep speed at 30 kHz RWB (using Nutwall windowing), and ultra low phase noise. The low levels of phase noise rival some of the more expensive spectrum analyzers on the market. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Signal Analyzer Frequency Extender from 50 to 110 GHz | |
Spectrum Analyzer Extender
from Keysight Technologies
|
| The V3050A from Keysight Technologies is a Signal Analyzer Frequency Extender with an output frequency from 50 to 110 GHz. It is designed for use with Keysight’s N9042B UXA X-Series signal analyzers. This frequency extender can handle a CW/Pulsed input power of up to 63 mW and includes an attenuator that provides an attenuation range from 0 to 26 dB in 2 dB steps (can be electronically switched). |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Bias Chokes for High Current Bias Tee Applications | |
RF Inductor
from Coilcraft
|
| The 4310LC Series from Coilcraft are Bias Chokes that provide flat bandwidth with high impedance to 6 GHz. They have a Ferrite core and offer low DCR with excellent current handling. These bias chokes are available in surface-mount packages that measure 11.68 x 4.8 mm and are ideal for use in high-current bias tee applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Flexible Microwave Cable Assembly from DC to 26.5 GHz | |
RF Cable Assembly
from HUBER+SUHNER
|
| The SUCOFLEX 526E from HUBER+SUHNER is a Flexible Microwave Cable Assembly that operates from DC to 26.5 GHz. It is available with N-type, 3.5 mm, or SMA connectors and is designed to provide an ideal solution for precise measurements in critical laboratory conditions. This 50-ohm cable assembly delivers high phase and amplitude stability with flexure and movement and has a unique design that ensures zero spring back and facilitates efficient handling during measurement. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1500 W GaN SSPA from 2700 to 3700 MHz | |
RF Amplifier
from RFHIC
|
| The RRP27371K5-30 from RFHIC is a GaN Solid-State Power Amplifier that operates from 2700 to 3700 MHz. The amplifier provides an output power of 1500 W with a gain of 30.7 dB (1 dB flatness) and an efficiency of 35%. It exhibits a pulse width of 200 µs and has a duty cycle of 10 %. This pallet amplifier is fabricated using RFHIC’s cutting edge GaN HEMT technology which provides excellent thermal stability in a small form factor. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Surface-Mount 180°, 1:2 RF Balun from 10 MHz to 9 GHz | |
Balun
from Marki Microwave
|
| The BALE-0009SMG from Marki Microwave is an RF Balun that operates from 10 MHz to 9 GHz. It has an impedance ratio of 1:2 (balanced to unbalanced transformer) and transforms 50 ohm to 100 ohm differential outputs. This balun can handle an input power of up to 1 W, has an insertion loss of 4.5 dB (as a mode converter) and a nominal phase shift of 180°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Resilient 32x32 Distributive Switch Matrices from 850 to 2150 MHz | |
Switch Matrix
from ETL Systems
|
| The NGM-101-XXXX Series from ETL Systems are Switch Matrices that operate from 850 to 2150 MHz. They have a distributive, non-blocking design and are available with up to 32 inputs and 32 outputs and any input can be connected to any output. These matrices have a switching time of less than 50 ms (from receipt of a command to implementation of path change) and provide isolation of up to 75 dB between any two ports. |
| |
Download Datasheet
Product Details | |
|
|
|
| 24 GHz Automotive Radar Transceiver MMIC | |
Automotive Radar Chipset
from Infineon Technologies
|
| The BGT24ATR11 is a SiGe MMIC transceiver for signal generation and reception, operating in the 24 GHz ISM band from 24 to 24.25 GHz. The Tx side of the transceiver has a 24 GHz VXO and delivers 11 dBm of signal power to the antenna. It has an auxiliary LO output that is available to provide LO signal to separate receiver components. |
| |
Download Datasheet
Product Details | |
|
|
|
| Qi 2.0 Compatible, 15 W In-Cabin Automotive Wireless Charging IC | |
Wireless Charging Transmitter
from indie Semiconductor
|
| The iND87200 from indie Semiconductor is an In-Cabin Automotive Wireless Charging IC that is compliant with Qi 1.3.2 and compatible with Qi 2.0. It supports the emerging maximum power point (MPP) wireless charging feature and has an integrated boost converter that can deliver up to 15W of power across the entire VBAT operating range. |
| |
Download Datasheet
Product Details | |
|
|
|
| Upconverter and Downconverter for 5G Radios from 24 to 29.5 GHz | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1128A from Analog Devices is a Microwave Upconverter and Downconverter that is designed for 5G radios from 24 to 29.5 GHz. It has an integrated upconverter (a transmitter), a downconverter (a receiver), and an LO chain with options of a 2x or 4x multiplier in one chip. Both upconverters and downconverters offer two modes of frequency translation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Bit, 360° SOI Phase Shifter from 8 to 11.5 GHz | |
Digital Phase Shifter
from Qorvo
|
| The QPC2110 from Qorvo is an SOI 6-bit Phase Shifter that operates from 8 to 11.5 GHz. It provides phase coverage of 360° with an LSB (least significant bit) of 5.625°. This bi-directional phase shifter has an insertion loss of 5.5 dB with an RMS amplitude error of less than 0.4 dB and an RMS phase error of less than 3 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| GPS/GNSS Anti-Jam Outdoor Antenna from 1559 to 1606 MHz | |
GNSS Anti-Jamming Solution
from Safran Electronics & Defense
|
| The 8230AJ from Safran is a GPS/GNSS Anti-Jam Outdoor Antenna solution that operates from 1559 to 1606 MHz. It is designed to cover GPS L1, GLONASS L1, BeiDou L1, Galileo L1, and QZSS L1 frequency bands. This conical antenna provides a gain of 40 dB and out-of-band rejection of more than 50 dB. It integrates a three-stage low noise amplifier, a mid-section SAW, and a tight pre-filter to protect against saturation due to high levels of sub-harmonics and L-band signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 GHz GTEM Test Cell for Radiation Immunity and Emission Testing | |
TEM / GTEM Cells
from ETS-Lindgren
|
| The 5407 from ETS-Lindgren is a GTEM Test Cell for frequency ranges from DC to 20 GHz (radiation immunity (RI)) and 9 kHz to 5 GHz (radiation emission (RE)). It enables users to perform RE and RI tests in a short time compared to an OATS or a standard chamber. This test cell allows users to perform tests quickly and accurately throughout the entire product life cycle; from design qualification testing, and moving through to pre-compliance testing and production sampling. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 25 MHz High-Stability & Ultra-Low Phase Noise OCXO | |
OCXO
from Abracon LLC
|
| The AOC2012XAJC-25.0000C from Abracon is an Oven-Controlled Crystal Oscillator (OCXO) with a frequency of 25 MHz. It provides an LVCMOS output signal with a phase noise of -152 dBc/Hz (at 10 kHz offset) and has low long-term aging of ±1 ppm over 20 years. This oscillator has a SC-Cut, High “Q” resonator-based design with an operating temperature range of -20°C to +70°C and a frequency stability (over the operating temperature range) of ±10 ppb. |
| |
Download Datasheet
Product Details | |
|
|
|
| D-Band External Frequency Extension Frontend from 110 to 170 GHz | |
Signal Generator Extender
from Rohde & Schwarz
|
| The R&S FE170ST from Rohde & Schwarz is an External Frequency Extension Frontend with output frequency in the D-Band from 110 to 170 GHz. It can extend the frequency range of various test and measurement products such as the R&S FSW signal and spectrum analyzer, R&S RTP oscilloscope, R&S SMW200A, and R&S SMM100A vector signal generators for wideband signal generation and analysis. |
| |
Download Datasheet
Product Details | |
|
