| New T&M Products . |
|
|
| Compact Real-Time Spectrum Analyzer from 9 kHz to 8 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO 200XA-6 from Aaronia AG is a Compact Real-Time Spectrum Analyzer that operates from 9 kHz to 6 GHz (up to 8 GHz optional extension for Wi-Fi 6E support). It incorporates a vector signal generator, has a real-time bandwidth of 44 MHz (Tx) and 88 MHz (2 x 44 MHz, via USB), and a resolution bandwidth from 62 to 200 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4-Channel Vector Signal Generator from 9 kHz to 8.5 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5186A MXG from Keysight Technologies is a 4-channel Vector Signal Generator with a frequency range from 9 kHz to 8.5 GHz. It delivers an output power of up to +27 dBm with a phase noise of -147 dBc/Hz (at 10 kHz offset) and has a frequency resolution of 1 x 10-5 Hz. This signal generator is capable of generating signals with a modulation bandwidth of 960 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Peak USB Power Sensors from 50 MHz to 40 GHz | |
Power Sensor
from Boonton
|
| The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz (available in 6 GHz, 18 GHz and 40 GHz configurations). They have a dynamic range from -60 dBm to +20 dBm with a measurement rate of 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz to 26 GHz Real-Time Phase Noise Analyzer | |
Phase Noise Analyzer
from Holzworth Instrumentation
|
| The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It has a real-time engine that covers the full measurement bandwidth with extremely fast measurement speeds to reduce product development time and optimize ATE manufacturing throughput. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Loeb Auctioneers | | |
|
|
| Flexible Cable Assemblies up to 70 GHz for Test and Measurement Applications | |
RF Cable Assembly
from HUBER+SUHNER
|
| The SUCOFLEX® 500 Series from HUBER+SUHNER are Flexible Cable Assemblies that operate up to 70 GHz. These instrumentation-grade cable assemblies are designed for precise measurements in critical laboratory conditions. They deliver high phase and amplitude stability with flexure and movement and have a unique design that ensures zero spring back and facilitates efficient handling during measurement. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Stable and Flexible Cable Assemblies from DC to 50 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityFlex™ from Maury Microwaves are Phase-Stable Cable Assemblies that operate from DC to 50 GHz. They are available in 24", 36", 48", and 60" lengths (custom lengths available) with N-type, SMA, 2.92mm and 2.4mm connectors. These ultra-flexible cable assemblies have a phase stability vs flexure of ±4°, amplitude stability vs flexure of ±0.05 dB, and provide shielding of more than 100 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Portable 1-Port Vector Network Analyzer from 85 MHz to 14 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The R140B from Copper Mountain Technologies is a 1-Port Vector Network Analyzer that operates from 85 MHz to 14 GHz. It supports linear, log and segment sweeps with up to 100,001 measurement points per sweep and a measurement time of 170 µs per point. This VNA has a dynamic range of 112 dB (85 – 4.8 GHz) and a directivity of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-time Spectrum Analyzer from 5 to 110 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN® V6 XPLORER 250XA-110 from Aaronia is a Real-time Spectrum Analyzer that operates from 5 to 110 GHz. It has 1 Rx channel with a real-time bandwidth of 44 MHz and has a DANL of -170 dBm/Hz. This analyzer has a sweep speed of 3 THz/s and this cost-effective RTSA opens up an entirely new application area with its high-frequency operation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| J-Band VNA Frequency Extender from 220 to 330 GHz | |
Vector Network Analyzer Extender
from ERAVANT
|
| The STO-03203N05-T-E1 from Eravant is a Vector Network Analyzer (VNA) Frequency Extender that operates in the J-Band from 220 to 330 GHz. It supports input frequencies from 9.1 to 13.75 GHz and integrates a Tx/Ref pair that has been designed to achieve full 1-port, S-parameter testing over the operating (extended) frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable 6x Frequency Extension Module from 60 to 90 GHz (WR12) | |
Signal Generator Extender
from OML Inc.
|
| The S12MPS from OML is a 6x Frequency Extension Module that converts input frequencies from 10 – 15 GHz to output frequencies from 60 – 90 GHz. This frequency extension module is designed for portability and field applications and is well suited for lab environments. It connects to the output of a signal generator allowing for a high performance source for DUT characterization activities. |
| |
Download Datasheet
Product Details | |
|
|
|
| Spectrum Analyzer Extender Module from 75 to 110 GHz | |
Spectrum Analyzer Extender
from Virginia Diodes, Inc.
|
| The WR10SAX from Virginia Diodes is a Spectrum Analyzer Extender Module with an output frequency from 75 to 110 GHz. It has an LO frequency from 6.25 – 9.17 GHz (Low), 12.5 – 18.33 GHz (High), and a multiplication factor of up to 12. This extender has a conversion loss of 10 dB and a displayed average noise level (DANL) of -150 dBm/Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 36-Channel Programmable Attenuator Assembly from 200 MHz to 6 GHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50PA-857 from JFW Industries is a Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It consists of 36 individually controlled solid-state programmable attenuators that provide an attenuation range from 0 to 63 dB in 1 dB steps with a switching speed of 3 µs. This attenuator assembly can handle an average input power of +27 dBm and has an insertion loss of less than 6.6 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP/CTIA/PTCRB-Ready Sub-6 GHz and mm-Wave 5G OTA Testing System | |
Antenna Measurement System
from EMITE Ingenieria
|
| The H300 from EMITE is a 5G OTA Test System that is designed for Sub-6 GHz and mm-Wave frequencies. It consists of a medium-sized anechoic chamber, a Compact Antenna Test Range (CATR) with a 100 x 100 cm serrated precision reflector (15 µm peak-to-peak roughness), a lateral-positioned tower and feed antenna (for frequencies from 3 to 40 GHz). |
| |
Download Datasheet
Product Details | |
|
|
|
| Single/Multi-Channel Vector Signal Generators from 10 MHz to 40 GHz | |
Signal Generator
from AnaPico
|
| The APVSGXX from AnaPico are Single/Multi-Channel Vector Signal Generators with a frequency range from 10 MHz to 40 GHz. They are available with up to 4 channels, deliver an output power from +13 to +19 dBm, and have an SSB phase noise of -115 dBc/Hz (at 20 kHz offset, 20 GHz frequency). These signal generators have an RF modulation bandwidth of 400 MHz and an image sideband rejection of -85 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 20 GHz GTEM Test Cell for Radiation Immunity and Emission Testing | |
TEM / GTEM Cells
from ETS-Lindgren
|
| The 5407 from ETS-Lindgren is a GTEM Test Cell for frequency ranges from DC to 20 GHz (radiation immunity (RI)) and 9 kHz to 5 GHz (radiation emission (RE)). It enables users to perform RE and RI tests in a short time compared to an OATS or a standard chamber. This test cell allows users to perform tests quickly and accurately throughout the entire product life cycle; from design qualification testing, and moving through to pre-compliance testing and production sampling. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Smart Noise Sources from 10 MHz to 110 GHz | |
Noise Source
from Rohde & Schwarz
|
| The R&S FS-SNS from Rohde & Schwarz are Smart Noise Sources that operate from 10 MHz to 110 GHz (18 GHz, 26 GHz, 40 GHz, 55 GHz, 67 GHz, 90 GHz or 110 GHz options available). They enable simple noise figure and gain measurements by automatically loading all necessary setup parameters and taking the environmental temperature into account. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
