| Trending Aerospace & Defense Products . |
|
|
| Versatile, Multi-Channel Software-Defined Radio from 30 MHz to 6 GHz | |
Software Defined Radio
from Epiq Solutions
|
| The Sidekiq™ NV800 from Epiq Solutions is a Software-Defined Radio (SDR) that operates from 30 MHz to 6 GHz (can be extended to 18 GHz). It consists of a dedicated RF transmitter with 8 RF receivers, each with a bandwidth of 50 MHz, for a total bandwidth of 400 MHz. This SDR incorporates four ADRV9004 RF transceivers (from Analog Devices), all streaming data and command & control to an AMD® ZU7 Ultrascale+™ FPGA. |
| |
Download Datasheet
Product Details | |
|
|
|
| HF Software-Defined Communication System for Airborne Applications | |
Software Defined Radio
from Collins Aerospace
|
| The HF-9500 from Collins Aerospace is a HF Communication System that is suitable for airborne applications. It features digital signal processing technology that delivers high-quality, reliable performance for military fixed-wing airborne applications. This system delivers an output power of 400 W and is designed to use a common suite of hardware and software components that meet Open Systems Architecture (OSA) and HF modernization requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Microwave Signal Generator from 100 KHz to 20 GHz | |
Signal Generator
from AnaPico
|
| The APMQS20 from AnaPico is a Signal Generator with a frequency range from 100 kHz to 20 GHz. This module has been designed to replace the QuickSyn FSW-0020 frequency synthesizer, which was phased out by NI a few years ago. AnaPico’s APMQS20 serves as a drop-in replacement, providing an uncomplicated transition for QuickSyn users and ensuring uninterrupted performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Marki Microwave | | |
|
|
| Sinuous Antenna from 2 to 18 GHz for Military Aircrafts | |
Antenna
from Cobham Advanced Electronic Solutions
|
| The 8506674-501 from CAES is a Microwave-Band Sinuous Antenna that operates from 2 to 18 GHz. Sinuous Antennas provide RF performance similar to comparably-sized planar spiral antennas, while also supporting reception of multiple signal polarization. This dual-circular polarized antenna provides a gain of 0 dBi and has a VSWR of less than 3:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Non-Blocking 32x32 Switch Matrix from 0.5 to 30 MHz | |
Switch Matrix
from Leonardo DRS
|
| The SI-9332 from Leonardo DRS is a 32x32 Switch Matrix that operates from 0.5 to 30 MHz. It allows 32 inputs to be connected to 32 outputs with an isolation of 50 dB between ports and provides a gain of 0 dB. This non-blocking switch matrix automatically attenuates the RF output power when very large RF inputs are applied, and the input circuitry protects from high-voltage transients and nearby lightning strikes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Thread, 96-Channel Encrypted Airborne GPS Receiver | |
GNSS Module
from BAE Systems
|
| The Airborne SAASM Receiver (ASR) 3.7-DS from BAE Systems is an Airborne GPS Receiver for L1 and L2 bands. It has 96 channels (48 hardware channels per thread) and hosts individual civil and military receivers on a single ASR form factor board. This receiver has a Wide Area Augmentation System (WAAS) capability for extremely accurate positioning. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ku-Band Integrated Microwave Assembly for UAS, SATCOM, and EW Applications | |
Integrated Microwave Assembly
from MtronPTI
|
| This Ku-Band Integrated Microwave Assembly (IMA) from MtronPTI has been designed for UAS, SATCOM and electronic warfare (EW) applications. It has Ku-band diplexer filters that are interconnected with two waveguide RF switches, a coupler and a low pass filter for harmonic suppression. The RF cables are fed from the diplexers to a separate RF module consisting of an RF board with low-noise amplifiers and an RF switch that switches the received signal between the two paths. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Fully-Integrated Dual-Channel Radio System from 4400 to 4940 MHz | |
Data Link
from Triad RF Systems
|
| The THPR1021 from Triad RF Systems is a 2-channel High-Power Radio that operates from 4400 to 4940 MHz. This radio integrates the necessary RF amplification, control circuitry, and interfaces to achieve higher RF output power, greater throughput, and longer link distances compared to standalone radios. It combines Silvus Streamcaster SC4210P-467-O OEM radio at its core with Triad’s high-power RF subsystems in a low SWaP package. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 10 MHz to 20 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PLNA-30-10M20-SFF-DCSMA from Quantic PMI (Planar Monolithics) is a Low Noise Amplifier (LNA) that operates from 10 MHz to 20 GHz. It provides more than 26 dB of gain with a noise figure of less than 3.3 dB and has an output P1dB of +14 dBm. This LNA has a reverse isolation of more than 35 dB and a VSWR of less than 2.4:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Rugged Downconverter with an RF Frequency from 1.5 to 18 GHz | |
Down Converter
from Mercury Systems
|
| The RFX-3190 from Mercury Systems is an RF Downconverter that converts an input frequency (RF) from 1.5 - 18 GHz to an output frequency (IF) from 50 - 160 MHz. It provides a gain of 30 dB (gain adjustment range of 20 dB) with a noise figure of 12 dB and image rejection of more than 60 dB. This downconverter has a tuning resolution of 10 kHz (optional finer resolutions) and a tuning speed of 2 ms. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thermal Vacuum Qualified Directional Coupler from 2 to 8.6 GHz | |
Directional Coupler
from KRYTAR
|
| The 102008616-TV from Krytar is a Thermal Vacuum Qualified Directional Coupler that operates from 2 to 8.6 GHz. It has a coupling value of 16 dB and frequency sensitivity of ±0.25 dB. The coupler has a directivity of over 20 dB and an insertion loss of less than 0.5 dB. It can handle up to 50 watts of average power and has a VSWR of 1.30:1. The coupler is ideal for space, electronic warfare (EW), commercial wireless, SATCOM, radar, signal monitoring and measurement, antenna beam forming, and EMC testing environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Multiport Contact for Military Avionics and EW Applications | |
RF Connector
from Times Microwave Systems
|
| The M8M™ is a Multiport Contact from Times Microwaves System that operates up to 40 GHz. It is designed for advanced military avionics and electronic warfare (EW) applications that require extremely restricted space constraints and rising operating frequencies. This contact has a unique construction and is ideal for high-vibration and harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Orbit, Low-Profile Hybrid-GEO-LEO Terminal for Military Applications | |
Electronically Steerable Antenna
from Kymeta
|
| The Osprey™ u8 from Kymeta is a Hybrid-GEO-LEO (HGL) Terminal that can be mounted on various military vehicles and vessels. It provides multi-orbit capability for mission-critical operations while on the move. This flat-panel terminal leverages the OneWeb Low Earth Orbit (LEO) network and combines the flexibility and reliability of GEO satellites with LTE for network redundancy in contested environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 7.25 to 7.75 GHz for SATCOM Applications | |
SATCOM Amplifier System
from TTI
|
| The TTI-X-LNA-7277 from TTI is a Low Noise Amplifier (LNA) that operates in the X-band from 7.25 to 7.75 GHz. It provides a gain of 50 dB with a noise figure of less than 0.0626 dB and has an output P1dB of more than 20 dBm. This LNA has spurious emissions of less than -60 dBc. It requires a DC supply from 12 to 28 V and consumes 200 mA of current (at 12 V). |
| |
Download Datasheet
Product Details | |
|
