| Featured Products this Week . |
|
|
| mm-Wave Broadwall Couplers from 26.5 to 40 GHz | |
Waveguide Coupler
from Scientific Microwave Corporation
|
| The mm-Wave Broadwall Couplers from Scientific Microwave Corporation operate from 26.5 to 40 GHz. They can sample in either forward or reverse directions with a coupling value of 30 dB and directivity better than 15 dB. These couplers have a return loss of less than 17.7 dB and an insertion loss of 0.6 dB over the entire operating frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Power Divider from 0.7 to 7.25 GHz | |
Power Divider
from Vaunix
|
| The LPD-752-2 from Vaunix is a 2-Way Power Divider/Combiner that operates from 700 to 7250 MHz. It can handle an input power of up to 20 W as a divider and up to 0.5 W as a combiner. This power divider has an insertion loss of less than 1.5 dB and provides isolation of more than 20 dB. It has an amplitude balance of ±0.5 dB and a phase balance of ±6°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electromagnetic Analysis Tool for Predicting Radar Cross Section | |
Software
from Remcom
|
| XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates techniques including Geometric Optics (GO), the Uniform Theory of Diffraction (UTD), Physical Optics (PO), and the Method of Equivalent Currents (MEC). |
| |
Download Datasheet
Product Details | |
|
|
|
| Programmable AWGN Noise Generators from 10 MHz to 3 GHz | |
Noise Generator
from Boonton
|
| The NGX1000 Series from Boonton are Programmable Noise Generators that operate from 10 MHz to 3 GHz. They generate additive white gaussian noise (AWGN) with an output power of 0/+10 dBm and have a noise attenuation range from 0 to 127 dB in 0.1 dB steps. These noise generators can be controlled manually via a 5-inch touchscreen display or remotely via Ethernet. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz to 26 GHz Real-Time Phase Noise Analyzer | |
Phase Noise Analyzer
from Holzworth Instrumentation
|
| The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It has a real-time engine that covers the full measurement bandwidth with extremely fast measurement speeds to reduce product development time and optimize ATE manufacturing throughput. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W Rackmount Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2145A-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/pulsed output power of 15 W with a power gain of more than 40 dB and a gain adjustment range of 20 dB. This amplifier has a Class A/AB linear design with a 2-tone intermodulation (IMD) of -30 dBc, harmonics of less than -20 dBc, and spurious of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Article | | Solving the Issue of Reflected Waves at D Band | | The call for “more D band” has gone out. With the ability to transmit 100 Gigabits per second (Gbps), the D band will unlock a number of technologies across a wide range of industries. Wireless communication is often the focal point, but commercial applications include high-precision sensing, radio astronomy, and airport security detectors. Click here to learn more. | | | |
|
|
| Fixed Attenuators from DC to 40 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HFFB-XXX-5/40 from JFW Industries are Fixed Attenuators that operate from DC to 40 GHz. They are available in attenuation values from 1 to 10 dB, 20 and 30 dB with an attenuation accuracy of ±1.3 dB. These attenuators can handle a bi-directional RF input power of 5 W and have a VSWR of less than 1.25:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective, Silicon SP4T Switch from 1 to 60 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5054 from Analog Devices is a Silicon SP4T Switch that operates from 1 to 60 GHz. It has an ON/OFF switching time of 25 ns, has an insertion loss of less than 3.2 dB, and provides 45 dB of isolation. This reflective switch can handle an RF input power of up to 25 dBm and provides an IP3 power of 47 dBm. It requires a dual DC supply of +3.3 V / -3.3 V and consumes less than 510 µA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Bit, 360° SOI Phase Shifter from 8 to 11.5 GHz | |
Digital Phase Shifter
from Qorvo
|
| The QPC2110 from Qorvo is an SOI 6-bit Phase Shifter that operates from 8 to 11.5 GHz. It provides phase coverage of 360° with an LSB (least significant bit) of 5.625°. This bi-directional phase shifter has an insertion loss of 5.5 dB with an RMS amplitude error of less than 0.4 dB and an RMS phase error of less than 3 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6.6 GHz Wi-Fi 7 BAW Bandpass Filter for U-NII 5-8 Bands | |
Band Pass Filter
from Akoustis
|
| The A10466 from Akoustis is a Wi-Fi 7 BAW Band Pass Filter with a passband from 6105 to 7125 MHz. This filter satisfies the stringent rejection requirements of 6.6 GHz U-NII 5-8 bands and provides high rejection that enables coexistence with adjacent Wi-Fi U-NII bands. It has a high power rating and low insertion loss to deliver high performance over a wide bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified TCXO from 10 to 350 MHz | |
TCXO
from Q-Tech Corporation
|
| The QT826 from Q-Tech Corporation is a Space-Qualified Temperature Compensated Crystal Oscillator (TCXO) that operates from 10 to 350 MHz. It provides a sinewave output with a phase noise of -146 dBc/Hz (at 1 kHz offset) and a frequency stability of ±10 ppm. This TCXO is a Class 2 hybrid solution that can tolerate radiation levels of 100 kRad (Si) according to MIL-PRF-55310 military standard. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 30 V Bias Tee from 160 kHz to 95 GHz | |
Bias Tee
from HYPERLABS
|
| The HL9448 from Hyperlabs is a Bias Tee that operates from 160 kHz to 95 GHz. It has a DC breakdown voltage of up to 30 V and a breakdown current of 175 mA. The bias tee has an insertion loss of less than 2.5 dB and a rise time of 3.7 ps. It has an amplitude match of ±0.1 dB and a phase match of ±4°. This bias tee is available in a module that measures 49.53 x 33.02 x 13.46 mm and has 1.0 mm jack/plug connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 W, Low-PIM RF Termination from 350 to 5925 MHz | |
Termination
from Microlab
|
| The TK-625MG from Microlab is a Low-PIM RF Termination that operates from 350 to 5925 MHz. It can handle an average input power of 25 W and a peak input power of 5 kW. This 50-ohm termination has a PIM of -161 dBc and a VSWR of less than 1.35:1. It is available in an IP67-rated package that measures 4.87 x 1.95 inches with 2.2-5 (Male) connector and is suitable for LTE/5G-NR applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz 2x2 MIMO Wi-Fi 5 + Bluetooth 5.2 Combo Module | |
RF Module
from Murata
|
| The Type 1YM (LBEE5XV1YM) from Murata is a 2.4/5 GHz Dual-Band Wi-Fi and Bluetooth 5.2 Combo Module that is designed for IoT applications. It is based on NXP’s 88W8997 chipset and supports DSSS, CCK, and OFDM modulation techniques. The 88W8997 chipset implements highly sophisticated enhanced collaborative coexistence hardware mechanisms and algorithms, which ensure that WLAN and Bluetooth® collaboration is optimized for maximum performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| mmWave RF Module from 57 to 71 GHz for Long-Range Applications | |
Beamforming IC
from Peraso Technologies, Inc
|
| The PRM2142X from Peraso is a mmWave RF Module that operates from 57 to 71 GHz. It has a 32-element vertically polarized antenna array and utilizes the Peraso X720 802.11ad phased array chipset which includes a baseband processor and a high-power mmWave beamforming transceiver RFIC. The module uses Peraso’s Directional Beam Scan and Connect (DBSC) technologies for establishing long-range Fixed Wireless links and the Peraso STA Focus for long-range Fixed Wireless Access point-to-multipoint systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| Tx/Rx Module with Integrated SPDT Switch and LNA from 1 to 6 GHz | |
Front End Module
from MACOM
|
| The MAMF-011164 from MACOM is an Integrated Switch and Low-Noise Amplifier Front End Module that operates from 1 to 6 GHz. It consists of an antenna switch and a dual-stage low-noise amplifier. In Tx mode, this module has an insertion loss of 0.3 dB and a P1dB of 40 dBm. In Rx mode, it provides a gain of 35 dB and has a noise figure of less than 1.3 dB. It can handle an input power of 8 W (39 dBm) and the integrated switch provides 50 dB of isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Single-Channel Coaxial Rotary Joint for 5G Test Applications | |
Coaxial Rotary Joint
from Link Microtek
|
| The AMCORJ-WB2 from Link Microtek is a single-channel coaxial rotary joint that operates up to 40 GHz. This 50-ohm miniature rotary joint has an insertion loss of less than 1 dB, a VSWR of under 1.8:1, and can operate at a temperature range from -20 to 70 degree Celsius. It is ideal for EMC evaluation of 5G systems as well as performance assessment of antennas, in radar systems at the lower-frequency end and Ka-band satellite communications systems at the higher end. |
| |
Download Datasheet
Product Details | |
|
|
|
| 64-Channel Handover Test System from 500 to 6000 MHz | |
Handover Test System
from Adaura Technologies
|
| The AD-HTS644 from Adaura Technologies is a 64-Channel Handover Test System that operates from 500 to 6000 MHz. It provides up to 95 dB of attenuation with step size 0.25 dB across 64 individually controllable RF channels from 512 attenuators. The 4-Output Test System can handle an input power of 28 dBm and has a VSWR of less than 2:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Test System to Verify RF Parameters of 5G NR Devices | |
RF Test Set
from Keysight Technologies
|
| The S8714A from Keysight Technologies is a 5G Test Solution that can verify the RF performance of 5G NSA and SA devices with built-in 3GPP test cases. It automatically configures parameters according to 3GPP TS 38.521 for measurement and also allows quick modification of parameters essential for RF testing such as channel, band, and bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
