| New Satellite & Space Products . |
|
|
| Wideband Multi-Channel Satellite Link Simulator | |
Satellite Link Emulator
from Square Peg Communications Inc
|
| The RLS-2100 from Square Peg Communications is a comprehensive satellite channel simulator with unparalleled impairment simulation, real-time multi-satellite orbit calculation, full-motion support and integrated GPS simulators. It can provide end-to-end or single link simulation of wideband terrestrial and satellite networks, satellite selection via open standard interfaces, and facilities to enable seamless integration into more complex test beds if required. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka-Band Payload Satellite Simulator from 17.7 to 31 GHz | |
Satellite Link Emulator
from Atlantic Microwave
|
| The DSS-9800-KA from Atlantic Microwave is a Ka-band Payload Satellite Simulator with an input frequency from 27.5 to 31 GHz and an output frequency from 17.7 to 21.2 GHz. It has an LO frequency of 9.8 GHz and an LO stability of +/-1 ppm. This satellite simulator has a right-hand circular polarized antenna with a 3 dB beamwidth of 30°. It has a conversion gain of 35 dB and an Rx/Tx antenna gain of 15 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Satellite Link Emulator from 950 to 1450 MHz for Closed-Loop Testing | |
Satellite Link Emulator
from Polaris
|
| The ASLE-L-200D from Polaris is a Satellite Link Emulator that operates in the L-Band from 950 to 1450 MHz (extendable up to 1950 MHz). It includes an L-band frequency converter, has a bandwidth of 200 MHz and provides a gain of up to 0 dB. This link emulator exhibits a time delay from 0 to 530 ms with a step size of 1 µs, a Doppler shift from -6 to +6 MHz with a step size of 1 Hz and an attenuation from 0 to 40 dB with a step size of 0.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Radiation Tolerant 20 GHz SPDT Absorptive Switch for Space Applications | |
RF Switch
from Teledyne e2v HiRel Electronics
|
| The TDSW020A2T from Teledyne Defense Electronics is an Absorptive SPDT Switch that operates from DC to 20 GHz. It can handle an input power of up to 35 dBm, provides an isolation of more than 40 dB and has an insertion loss of less than 3 dB. This switch is fabricated on robust 0.15 µm InGaAs pHEMT technology. It is controlled using TTL-compatible voltage levels and requires DC supplies of +5V/-5V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Space-Qualified Outrigger Terminations from DC to 27 GHz | |
Termination
from Smiths Interconnect
|
| The SpaceNXT HC Series from Smiths Interconnect are Outrigger Terminations that operate from DC to 27 GHz. They are specifically designed and tested to meet space orbit environmental criteria. These terminations use a patented layout to offer improved power handling over conventional surface mount solutions without compromising performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Space-Qualified Power Divider/Combiner from 10.5 to 13 GHz | |
Power Divider
from Crane Aerospace & Electronics
|
| The PDM-21-12G from Crane Aerospace & Electronics is a Space-Qualified, 2-way Power Divider/Combiner that operates from 10.5 to 13 GHz. This in-phase power divider can handle a CW input power of 2 W, provides an isolation of more than 20 dB, and has an insertion loss of less than 0.5 dB. It has an amplitude balance of ±0.2 dB and a phase balance of ±3°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W Satellite Block Upconverter (BUC) from 27.5 to 31 GHz | |
Block Up Converter
from RevGo
|
| The RGUC-A mPower from RevGo is a Ka-Band Satellite Block Upconverter (BUC) that upconverts an IF input frequency of 950 – 2000 MHz to an RF output frequency of 27.5 – 31 GHz. It delivers a saturated output power of 43 dBm (20 W) and a small signal gain of 70 dB with a phase noise of less than -93 dBc/Hz. This BUC has an IMD3 of -25 dBc and output spurious levels of -55 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low Noise Block from 37.5 to 42.5 GHz with Single/Switchable LO Frequency | |
Low Noise Block
from Swedish Microwave AB
|
| The Q/V-Band Low Noise Block (LNB) from Swedish Microwave converts input frequencies from 37.50 – 42.50 GHz to output frequencies from 950 – 3450 MHz. It has an LO frequency from 36.55 to 40.55 GHz with an LO leakage of less than -60 dBm. This LNB provides a programmable gain from 40 to 55 dB with automatic temperature gain compensation and an image rejection of more than 23 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| X-Band Low Noise Block Downconverter from 7.75 to 8.50 GHz | |
Low Noise Block
from AmpliTech
|
| The APT5-LNB-XBAND from AmpliTech is a Low Noise Block Downconverter that converts an input RF frequency from 7.75-8.50 GHz to output IF frequency from 800-1550 MHz. It provides over 56 dB of gain and has an output P1dB of more than 15 dBm. The LNB has a VSWR of less than 1.7:1, provides image rejection of above 30 dB, and has a phase noise density of -128 dBc for a 1 MHz frequency offset. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 400 W C-Band TWTA for Satellite Uplink Applications | |
SATCOM Amplifier System
from Communications & Power Industries
|
| The VZC6964 from Communications & Power Industries (CPI) is a Travelling Wave Tube Amplifier (TWTA) that operates in the C-band from 5.725 to 7.075 GHz. It provides a TWT output power of 400 W and a flange output power of more than 350 W with a gain of over 75 dB. This outdoor TWTA employs a high-efficiency, dual-depressed collector helix traveling wave tube and is designed for satellite uplink applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 W GaN Universal Transceiver from 17.20 to 31 GHz | |
SATCOM Transceiver
from Actox
|
| The AT3UKAS from Actox is a GaN Universal Transceiver that operates from 17.20 – 22.20 GHz (Rx) and 27.5 – 31.0 GHz (Tx). It has an IF frequency of 950 – 1950 MHz and an LO (electronically and manually switchable) frequency from 16.25 to 29.05 GHz. In the Tx mode, it delivers an output power of 3 W with a gain of 63 dB with a phase noise of -108 dBc/Hz (at 1 MHz offset) and a spurious emission of -55 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 W GaN Power Amplifier MMIC from 13.75 to 14.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0017 from Qorvo is a Power Amplifier MMIC that operates in the Ku-Band from 13.75 to 14.5 GHz (optional 12.75 – 15.35 GHz). It delivers an output power of 44 dBm (25 W) with a gain of 30 dB and a power added efficiency of 35%. This amplifier is fabricated using Qorvo's production 0.15 um GaN-on-SiC process (QGaN15) and has on-chip blocking capacitors with DC grounded I/O ports for optimum ESD performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Vehicle-Mounted Driveaway Terminal from 7.25 to 31 GHz | |
SATCOM Terminal
from DataPath
|
| The CCT120-DA from DataPath is a Driveaway Terminal that operates from 7.25 to 21.2 GHz (Rx) and 7.9 to 31 GHz (Tx). It delivers an output power of 60 W (X band), has an EIRP of 54.2 dBW (X band) and a G/T (gain-to-noise-temperature) of 15.7 dB/K (X band). This terminal has an azimuth range of ±175° and an elevation range from 10° to 90°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10/60 MHz Space-Qualified Rubidium Atomic Frequency Source | |
Rubidium Oscillator
from Safran Electronics & Defense
|
| The miniRAFS from Safran is a Rubidium Atomic Frequency Source with an operating frequency of 60 MHz (Main) and 10 MHz (Auxiliary). It provides an output signal level of 7 dBm and has a frequency accuracy of better than 2 x 10-10. The frequency source has a phase noise of -135 dBc/Hz (@100 kHz offset), spurious levels of better than -60 dB and harmonics of -30 dBc. It is a complete atomic clock within a very small volume. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified L1/L2 Band GPS Receiver for LEO and GEO Applications | |
GNSS Module
from General Dynamics Mission Systems
|
| The Sentinel® M-Code GPS Receiver from General Dynamics provides PPS position, velocity, and time information for LEO and GEO satellites (with an option for MEO and HEO). It has 32 channels (can go up to 64 channels) with support for C/A, P(Y), and Modernized M-Code (L2C optional) civil signals. This receiver operates in the L1 and L2 bands, has a dual antenna configuration, and allows any channel to be assigned to either antenna. |
| |
Download Datasheet
Product Details | |
|
