| New RF and Microwave Products this Week . |
|
|
| Non-reflective SP4T SOI Switch from 100 MHz to 45 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5048 from Analog Devices is a Non-reflective SP4T SOI Switch that operates from 100 MHz to 45 GHz. It provides an isolation of up to 41 dB, has a switching time of 20 ns and a rise/fall time of 4 ns. This switch can handle an RF input power of 30 dBm and has an insertion loss of less than 4 dB. It is manufactured using a silicon-on-insulator (SOI) process and has CMOS/low-voltage transistor-to-transistor logic (LVTTL) compatible controls and enable & logic select controls. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier MMIC from 500 to 5000 MHz with Bypass | |
RF Amplifier
from Mini Circuits
|
| The TSS2-53LNB+ from Mini Circuits is a Low Noise Amplifier MMIC that operates from 500 to 5000 MHz. It provides a gain of up to 21.7 dB with a noise figure of less than 1.3 dB and has an output P1dB of 19 dBm. This LNA is manufactured using E-pHEMT technology and offers a wide dynamic range over a broad frequency range. It has integrated switches enabling users to bypass the amplifier during high signal conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB/LAN Controlled Thermal Power Sensor from 110 to 170 GHz | |
RF Power Meter & Sensor
from Rohde & Schwarz
|
| The R&S®NRP170TWG(N) from Rohde & Schwarz is a Thermal Power Sensor with a frequency range from 110 to 170 GHz. It has a dynamic range of -35 to +20 dBm and can perform up to 500 measurements per second. This plug-and-play power sensor is fully calibrated for long-term stability and is designed to reduce measurement noise and drift while maintaining accuracy. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The C1209 is a two port computer-controlled vector network analyzer that operates from 100 kHz to 9 GHz. It has a dynamic range of 148 dB and output power range from -60 dBm to 15 dBm. The VNA can measure all four S-Parameters, has a measurement speed of 10 microseconds and can measure up to 500,001 points.This “half rack” vector network analyzer with dimensions of 16.75 x 9.25 x 3.8 inches (425 x 235 x 96 mm) and a weight of just over 12 lbs. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 GHz Network Node Real-Time Spectrum Analyzer/Receiver | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The NXE-200 from HAROGIC Technologies is a Real-time Spectrum Analyzer (RTSA)/Receiver with a frequency range from 9 KHz to 20 GHz. It has an analysis bandwidth of 100 MHz, an adjustable sampling rate, and a sweep speed of 320 GHz/sec. This spectrum analyzer has a superheterodyne digital receiver architecture with a 19-segment pre-selected filter and employs FPGA-based digital signal processing. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by DesignCon 2024 | | | |
|
|
| Sub-GHz Low-Power LoRa SiP (System-in-Package) | |
RF Module
from Microchip Technology
|
| The ATSAMR34J18 from Microchip Technology is a Sub-GHz LoRa System-in-Package (SiP) that operates from 137 to 1020 MHz. It combines an ultra-low power microcontroller unit (MCU) with a UHF transceiver communication interface in a single chip-down package. This SiP consists of a 32-bit ARM Cortex-M0+ processor, an integrated LoRa technology transceiver, a frequency synthesizer, a memory unit (256 KB of flash and 40 KB of SRAM), ADCs, voltage regulators, timers, event controllers, bus matrix, and five serial communication interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 Gbps 5G mmWave Antenna Module for Global Bands | |
Front End Module
from Qualcomm
|
| The QTM565 from Qualcomm is a 5G mmWave Antenna Module that supports global frequency bands: 24-29.5 GHz and 37-43.5 GHz. It delivers peak download speeds of up to 10 Gbps and supports up to 1000 MHz of bandwidth. This module is based on Qualcomm’s 5G modem-RF systems (Snapdragon X75, Snapdragon X72) and supports 1st converged 5G sub-6 GHz and mmWave architecture, Qualcomm 5G PowerSave Gen 4 and Qualcomm SmartTransmit Gen 4 technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 GHz SMA Straight Cable Plug (Male) Connector | |
RF Connector
from HUBER+SUHNER
|
| The 11_SMA-50-2-114/111_N from HUBER+SUHNER is an 18 GHz SMA Right Angle Cable Plug (male) connector. It uses Copper Beryllium alloy for the center contact, outer conductor, and body and has a PTFE insulator. This 50-ohm connector meets IEC 60169-15, MIL-STD-348A/310, and CECC 22110 standards and can be used with GX-02272, RG-174/U, and RG-316/U cables. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sponsored by PCB Directory | | |
|
|
| 60 W, GaN Hybrid Power Amplifier Module from 3.7 to 4.1 GHz | |
RF Amplifier
from RFHIC
|
| The SDM39005-30H from RFHIC is a 2-Stage GaN Hybrid Power Amplifier Module that operates from 3.7 to 4.1 GHz. It delivers a saturated output power of 60 W with a power gain of 34 dB and a drain efficiency of 14%. It is internally matched to 50 ohms and requires a DC supply voltage of 48 V to operate. The amplifier is available in a ceramic surface-mount package that measures 8.0 x 14.0 x 2.6 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Bias Chokes for High Current Bias Tee Applications | |
RF Inductor
from Coilcraft
|
| The 4310LC Series from Coilcraft are Bias Chokes that provide flat bandwidth with high impedance to 6 GHz. They have a Ferrite core and offer low DCR with excellent current handling. These bias chokes are available in surface-mount packages that measure 11.68 x 4.8 mm and are ideal for use in high-current bias tee applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 10.95 to 12.75 GHz | |
RF Amplifier
from AmpliTech
|
| The APT5-10951275-40K15-WR75-ISOL from AmpliTech is a Low Noise Amplifier that operates from 10.95 to 12.75 GHz. It provides a gain of 56 dB with a noise figure of less than 0.54 dB and has a P1dB of 15 dBm. The amplifier utilizes state-of-the-art PHEMT technology and requires a supply of 24 V. It is available in a module that measures 7.90 × 2.75 × 1.84 inches with SMA-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Shielded Chambers for Testing Devices up to 18 GHz | |
Anechoic Chamber
from RF Electronics
|
| The HDRF-CHM Series from RF Electronics are RF Shielded Chambers that are designed for large area WLAN, multiple client/multiple AP wireless devices testing from 10 kHz to 18 GHz. They have thick RF absorbing foam that deadens standing waves and reflections and provide high isolation to deliver an accurate performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Power Amplifier from 126 to 142 GHz for Radar Applications | |
RF Amplifier
from AT Microwave
|
| The AT-PA-126142-3320 from AT Microwave is a Power Amplifier that operates from 126 to 142 GHz. It delivers a saturated output power of +20 dBm with a gain of 33 dB. This amplifier exhibits high gain, high linearity, and low input/output return loss with a flat gain response. It requires a single DC supply of +10 V and consumes 0.35 A of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-Ridged Horn Antenna from 0.3 to 4.5 GHz for EMC/EMI Applications | |
Horn Antenna
from RF SPIN
|
| The DRH300 from RF SPIN is a Double-Rigded Horn Antenna that operates from 0.3 to 4.5 GHz. This linearly polarized antenna has an antenna factor from 15 to 30 dB/m and a VSWR of less than 1.60:1. It can handle a CW input power of 800 W and a peak input power of 1.2 kW. The antenna exhibits low return loss over a wide operating bandwidth and is individually calibrated to cover the 5G frequency band. |
| |
Download Datasheet
Product Details | |
|
|
|
| SPDT Absorptive PIN Diode Switch from 1 to 200 MHz | |
RF Switch
from RF-Lambda
|
| The RFSP2TA0002M-C1 from RF Lambda is an Absorptive SP2T PIN Diode Switch that operates from 1 to 200 MHz. It has a switching speed of 5.5 ns and provides an isolation of 70 to 85 dB. This switch can handle an input power of up to 1 W (~30 dBm) and has an insertion loss of less than 2.3 dB. It has a fast-switching speed over the operating frequency band and has a built-in TTL-compatible driver. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband Multi-Channel Satellite Link Simulator | |
Satellite Link Emulator
from Square Peg Communications Inc
|
| The RLS-2100 from Square Peg Communications is a comprehensive satellite channel simulator with unparalleled impairment simulation, real-time multi-satellite orbit calculation, full-motion support and integrated GPS simulators. It can provide end-to-end or single link simulation of wideband terrestrial and satellite networks, satellite selection via open standard interfaces, and facilities to enable seamless integration into more complex test beds if required. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 10 kW Solid-State Power Amplifier from 1.6 to 30 MHz | |
RF Amplifier
from Datron
|
| The DTX10K from Datron is a 10 KW Solid-State Power Amplifier (SSPA) that operates from 1.6 to 30 MHz. It has been designed for use in Maritime, Ground to Air, and Ground to Ground long-range communications and support for both Voice & Data. This amplifier is capable of continuous duty operation and supports various modes including AM, AME, SSB, ISB, Analog Voice, Digital Voice, and DATA. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged 4-Channel High-Power Radio from 2.2 to 2.5 GHz | |
Data Link
from Triad RF Systems
|
| The THPR1055 from Triad RF Systems is a 4-channel High-Power Radio that operates from 2200 to 2500 MHz. It combines Silvus Streamcaster SC4410-235-O OEM form-factor radio with Triad’s high-power RF subsystems in a low SwaP package. This radio consists of RF components such as bidirectional amplifiers (BDAs), RF filtering, and control circuitry to achieve higher RF output power, greater throughput, and greater link distances than standalone radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Wireless Module for Home, Enterprise, and Manufacturing Applications | |
Cellular Module
from Fibocom
|
| The FM190-GL from Fibocom is a 5G Wireless Module that is compliant with the 3GPP Release 17 standard. It delivers a downlink data rate of up to 6.18 Gbps and an uplink data rate of up to 900 Mbps. This module supports global 5G Sub-6, LTE FDD/TDD, UMTS & CDMA bands and has 4 antennas. It requires a DC supply of 3.8 V and can be controlled via USB 3.1/3.0/2.0, PCIe 4.0/3.0, UIM, and I2S interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port In-Building DAS Antennas from 617 to 8500 MHz | |
Antenna
from Sinclair Technologies
|
| The SI500A Series from Sinclair are 2-port In-Building DAS Antennas that operate from 617 to 8500 MHz. These linear-horizontally-polarized antennas provide 5 dBi of gain and have a VSWR of less than 2.2:1. They offer port-to-port isolation of more than 30 dB and can handle up to 50 W of input power per port. |
| |
Download Datasheet
Product Details | |
|
|
|
| Planar Monopole Antennas from 5.85 to 8.25 GHz for UWB Applications | |
Antenna
from Laird Connectivity
|
| The NanoUWB Series from Laird Connectivity are Planar Monopole Antennas that operate from 5850 to 8250 MHz. These linearly-polarized antennas provide a peak gain of up to 3.9 dBi with an efficiency of more than 64% and have a VSWR of less than 2.5:1. They have been designed to operate with Laird’s Sera NX040 UWB module and include a rigid monopole design that supports UWB implementations. |
| |
Download Datasheet
Product Details | |
|
