| New 5G Products . |
|
|
| Top-Side Cooled RF Power Amplifier for 5G Infrastructure from 3300 to 3670 MHz | |
RF Amplifier
from NXP Semiconductors
|
| The A5M34TG140-TC from NXP Semiconductors is a Doherty Power Amplifier Module that operates from 3300 to 3670 MHz. It is based on NXP's new top-side cooling technology that helps radio designers create thinner, lighter 5G radio units while reducing design and manufacturing complexities. This 8 W module series is designed for massive MIMO radios covering 3.3 GHz to 3.8 GHz — typically 32T32R (200 W) or 64T64R (320 W) radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| Non-reflective SP4T SOI Switch from 100 MHz to 45 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5048 from Analog Devices is a Non-reflective SP4T SOI Switch that operates from 100 MHz to 45 GHz. It provides an isolation of up to 41 dB, has a switching time of 20 ns and a rise/fall time of 4 ns. This switch can handle an RF input power of 30 dBm and has an insertion loss of less than 4 dB. It is manufactured using a silicon-on-insulator (SOI) process and has CMOS/low-voltage transistor-to-transistor logic (LVTTL) compatible controls and enable & logic select controls. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-band Front-End Module for 4G/LTE and 5G NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58109-51 from Skyworks is a Front-End Module for multi-band 4G/LTE and 5G NR applications. It consists of power amplifier (PA) blocks, low-noise amplifier (LNA) blocks, integrated bi-direction RF coupler with cascade support, and duplexers for LTE Bands 1, 3, 40, 32, 25, 66, 30, 7, 41, 34, 39. |
| |
Download Datasheet
Product Details | |
|
|
|
| SP5T Absorptive Switch from 1 to 5 GHz for 4G/5G Base Stations | |
RF Switch
from iCana
|
| The ICASS1050-5T from iCana is an SP5T Absorptive Switch that operates from 1 to 5 GHz covering major sub-6 GHz 3GPP bands. It has a switching time of less than 450 ns and provides an isolation of more than 65 dB (RFx-RFc and RFx-RFx). This switch can handle a CW input power of 33 dBm on selective port, 27 dBm on terminated port, and has an insertion loss of less than 0.7 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 10 Gbps 5G mmWave Antenna Module for Global Bands | |
Front End Module
from Qualcomm
|
| The QTM565 from Qualcomm is a 5G mmWave Antenna Module that supports global frequency bands: 24-29.5 GHz and 37-43.5 GHz. It delivers peak download speeds of up to 10 Gbps and supports up to 1000 MHz of bandwidth. This module is based on Qualcomm’s 5G modem-RF systems (Snapdragon X75, Snapdragon X72) and supports 1st converged 5G sub-6 GHz and mmWave architecture, Qualcomm 5G PowerSave Gen 4 and Qualcomm SmartTransmit Gen 4 technology. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Rohde & Schwarz | | | |
|
|
| 5G NR/LTE Small Cell Radio Unit SoC | |
Wireless Chipset
from Picocom
|
| The PC805 from Picocom is a Small Cell Radio Unit (RU) SoC that is designed for 5GNR/LTE O-RU RAN architectures. It supports 3GPP 5GNR releases 15 and 16, meets Open RAN (O-RAN) specifications, and supports Split 7.2x O-RAN Radio Unit (O-RU CAT-A) and Split 8 Remote Radio Heads (RRH or RRU) architectures. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-band, 3GPP Rel-16 5G NR/LTE-FDD/LTE-TDD/HSPA+ Module | |
Cellular Module
from SIMCom
|
| The SIM8260G-M2 from SIMCom is a Multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ Module. It supports 3GPP Release-16 5G NSA/SA architectures with an uplink data rate of 3.47 Gbps (5G NSA) and a downlink data rate of 0.9 Gbps (5G SA). This module supports GNSS constellations. It has multiple integrated interfaces such as PCIe, USB 3.1, GPIO, etc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Wireless Module for Home, Enterprise, and Manufacturing Applications | |
Cellular Module
from Fibocom
|
| The FM190-GL from Fibocom is a 5G Wireless Module that is compliant with the 3GPP Release 17 standard. It delivers a downlink data rate of up to 6.18 Gbps and an uplink data rate of up to 900 Mbps. This module supports global 5G Sub-6, LTE FDD/TDD, UMTS & CDMA bands and has 4 antennas. It requires a DC supply of 3.8 V and can be controlled via USB 3.1/3.0/2.0, PCIe 4.0/3.0, UIM, and I2S interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Embedded IoT Antenna from 600 to 6000 MHz | |
Antenna
from Quectel
|
| The YC0018CA from Quectel is a 5G Embedded IoT Antenna that operates from 600–960 MHz, 1427–1707 MHz, 1710–2170 MHz, 2300–2700 MHz, 3300–5000 MHz and 5100–6000 MHz. It can be used with other 5G antennas for MIMO (multiple input, multiple output) applications in which multiple antennas are used at both the source (transmitter) and the destination (receiver). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 W, 50-Ohm mmWave RF Termination from DC to 110 GHz | |
Termination
from Marki Microwave
|
| The TF50-110M from Marki Microwave is an RF Termination that operates from DC to 110 GHz. It can handle an input power of up to 1 W and has a return loss of 20 dB over the entire band. This 50-ohm termination utilizes passive GaAs MMIC technology to enable the production of smaller constructions that replace larger form factor circuit board constructions. |
| |
Download Datasheet
Product Details | |
|
|
|
| TCXO from 10 to 50 MHz for 5G Small Cell Applications | |
TCXO
from Rakon
|
| The RTH7050PA from Rakon is a Hybrid Temperature-Compensated Crystal Oscillator (TCXO) that operates from 10 to 50 MHz. It provides a regulated/standard CMOS output with an SSB phase noise of -144 dBc/Hz (at 100 Hz offset) and a frequency stability (versus temperature) of ±20 ppb. This TCXO uses Rakon’s proprietary Mercury+ ASIC technology with a built-in heating control system, enabling it to achieve high-frequency stability over an operating temperature range from -40°C to +95°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Low Noise Amplifier (LNA) from 17 to 31.5 GHz | |
RF Amplifier
from Altum RF
|
| The ARF1201Q2 from Altum RF is a Low Noise Amplifier (LNA) that operates from 17 to 31.5 GHz. It provides a linear gain of 21 dB with a noise figure of 2.6 dB and has an output P1dB of 7 dBm. This LNA requires a DC supply of 3.3 V, draws 40 mA of bias current, and consumes 130 mW of power. It is internally matched to 50 ohms with ESD protection and has RF ports that are DC grounded. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W GaN Power Amplifier from 23 to 27.5 GHz | |
RF Amplifier
from mmTron Inc
|
| The TMC152 from mmTron is a GaN Power Amplifier that operates from 23 to 27.5 GHz. It delivers a saturated output power of 40 dBm (10 W) with a gain of 23 dB and has a noise figure of 7 dB. This amplifier is matched to 50-ohms and eliminates the need for RF port matching. It has bond pads and backside Au-based metallization compatible with ribbon and wedge bonding and high conductivity epoxy and eutectic die attach methods. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Amplifiers from 700 MHz to 6 GHz | |
RF Amplifier
from Fairview Microwave
|
| The FMAMXXXX Series from Fairview Microwave are 5G Amplifiers that operate from 700 MHz to 6 GHz. They deliver an output power of 2 W with a gain of up to 50 dB and a noise figure of less than 3.2 dB. These amplifiers require a DC supply from 9 to 15 V and consume less than 1.5 A of current. They are available in modules (heatsink available on selected models) with SMA connectors and meet the MIL-STD-202 environmental test conditions for long-lasting ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Dual-Polarized Scalar Feed Horn Antenna from 24 to 43.5 GHz | |
Feed Horn
from ERAVANT
|
| The SAF-2434431535-328-2F2F-R1-280-DP from ERAVANT is a Scalar Feed Horn Antenna that operates from 24 to 43.5 GHz. This dual-polarized antenna has a 3 dB E and H-plane beamwidth of 35° and provides a gain of 15 dBi. It covers several 5G FR2 bands from 24 to 43.5 GHz and has an integrated orthomode transducer (OMT) that provides high port isolation and a broad band scalar horn that provides low sidelobe levels. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz, Magnetic-Mount 5G-NR Omnidirectional Antenna | |
Antenna
from Maxtena
|
| The MEA-5800-MM from Maxtena is a 5G-NR Magnetic-Mount Antenna that operates from 617 – 960 MHz, 1427 – 2690 MHz, 3300 – 5000 MHz and 5150 – 5925 MHz. This linearly-polarized antenna has an omnidirectional radiation pattern with an efficiency of up to 60% and a VSWR of less than 1.9:1. It can handle an input power of up to 35 W and provides a peak gain of 2.9 dBi. |
| |
Download Datasheet
Product Details | |
|
