Top IoT Products in 2023 . |
|
|
5G Massive IoT SiP Module for LTE-M/NB-IoT Platforms |
Cellular Module
from Skyworks Solutions
|
The SKY66431-11 from Skyworks is a Multi-Band Multi-Chip System-in Package (SiP) for 5G Massive IoT (LTE-M/NB-IoT) platforms. It integrates the entire RF front end, transceiver, power management, crystals, memory, MCU, and baseband modem for an LTE multi-band radio. This SiP has been optimized for LTE-M/NB-IoT half-duplex operation (HD-FDD). |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Wi-Fi HaLow (IEEE 802.11ah) SoC for IoT Applications |
Wireless Chipset
from Morse Micro
|
The MM6108 from Morse Micro is a Wi-Fi HaLow (IEEE 802.11ah) SoC for IoT Applications. This SoC augments Wi-Fi by operating in spectrum below 1 GHz to offer a longer range and lower power connectivity. Wi-Fi HaLow meets the unique requirements for the Internet of Things (IoT) to enable a variety of use cases in industrial, agricultural, smart building, and smart city environments. |
|
Download Datasheet
Product Details | |
|
|
|
LTE Cat M1/NB1/NB2 IoT Module for Worldwide Deployment |
Cellular Module
from Renesas
|
The RYZ024A from Renesas is an LTE Cat M1/NB1/NB2 Cellular IoT Module for worldwide deployment. It is based on Renesas’ second-generation Sequans chip platform with a Single-SKU™ RF front end and an integrated EAL5+ Secure Element (SE) capable of hosting the SIM inside the module for high security. This module has been developed according to 3GPP Release 14 with an option to be upgraded to Release 15. |
|
Download Datasheet
Product Details | |
|
|
|
Sub-GHz LoRa Radio Transceiver from 150 to 960 MHz |
RF Module
from Semtech
|
The SX1268 from Semtech is a Sub-GHz LoRa Radio Transceiver that operates from 150 to 960 MHz. It has been designed to comply with the physical layer requirements of the LoRaWAN specification released by the LoRa alliance. This radio is suitable for systems targeting compliance with radio regulations such as ETSI EN 300 220, FCC CFR 47 Part 15, China regulatory requirements, and the Japanese ARIB T-108. |
|
Download Datasheet
Product Details | |
|
|
|
LoRa/LoRaWAN IoT Module from 860 to 1020 MHz |
RF Module
from Miromico
|
The FMLR-72-STL0Z from Miromico is a Sub-GHz LoRa/LoRaWAN IoT Module that operates from 860 to 1020 MHz. It has been designed to provide wireless connectivity to devices and sensors with low data rates over long distances. This module integrates a 32-bit ARM Cortex-M0+ microcontroller with built-in 192 KB flash memory, 20 KB RAM, and 6 KB EEPROM, RF network frontend, Semtech SX1272-based transceiver, antenna, and serial interfaces. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by MWC Barcelona | | |
|
|
Low-Power LTE Cat NB2 NB-IoT + GNSS Industrial Modules |
Cellular Module
from STMicroelectronics
|
The ST87M01 Series from STMicroelectronics are LTE Cat NB2 NB-IoT and GNSS Industrial Modules. They are based on 3GPP Release 15 and support worldwide / regional LTE and GNSS bands. These modules have embedded IoT internet protocols with single-tone/multi-tone/extended TBS and 2 HARQ schemes and also include support for eDRX, PSM, and differential FOTA. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
3GPP Rel-17 5G (SA) RedCap Modules |
Cellular Module
from Fibocom
|
The FG132-NA Series from Fibocom are 5G RedCap Modules that are backward compatible with LTE Cat 4 networks. They support a downlink data speed of 220 Mbps and an uplink data speed of 100 Mbps. These modules are compliant with 3GPP Release-17 and support 5G standalone architecture along with 5G slicing. |
|
Download Datasheet
Product Details | |
|
|
|
Single-mode LTE Cat M1 Module for IoT Applications |
Cellular Module
from Sequans Communications
|
The GM01Q EZLinkLTE module from Sequans is an all-in-one, single-mode LTE category M1 (Cat M1) module that supports 17 LTE bands for worldwide connectivity. It is based on Sequans’ Monarch LTE Cat M1/NB1 platform, and has integrated LTE-optimized transceiver, a complete Single SKU RF front-end, Sequans’ carrier-proven LTE protocol stack and a comprehensive software package for over-the-air device management and packet routing. This module operates with a single LTE antenna on LTE low & mid bands and is upgradable to 3GPP Release 14 LTE Advanced Pro. |
|
Download Datasheet
Product Details | |
|
|
|
Low-Power LTE Cat M1/NB-IoT Module |
Cellular Module
from Murata
|
The Type 1SE (LBAD0ZZ1SE) from Murata is an LTE Cat M1/NB-IoT Module that operates from 703 to 960 MHz and 1710 to 2170 MHz. It is based on an Altair ALT1250 + ST STM32L462RE Cortex M4 processor and includes 512 KB flash, 160 KB SRAM and 1 MB onboard serial flash. This module has an internal Truphone (Worldwide operation) eSIM (WLCSP) and supports 3GPP eDRX and PSM modes to reduce power consumption. |
|
Download Datasheet
Product Details | |
|
|
|
Sub-6 GHz 5G-NR Module for Industrial IoT and eMBB Applications |
Cellular Module
from Quectel
|
The RM521F-GL from Quectel is a 5G NR Sub-6 GHz Module that has been optimized for IoT/eMBB applications. It is based on the 3GPP Release 16 technology, supporting both 5G NSA and SA modes. This module is industrial-grade and is ideal for industrial and commercial applications. It covers nearly all the mainstream carriers worldwide for both 5G and LTE-A. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by MWC Barcelona | |
|
|
Low Power Module with Integrated LTE-M/NB-IoT Modem and GPS |
Cellular Module
from Nordic Semiconductor
|
The nRF9160 is a low power System-in-Package with integrated LTE-M/NB-IoT modem and GPS. The integrated modem supports both LTE-M and NB-IoT and can operate globally removing the need for regional variants. The modem firmware is upgradable via secure, encrypted Firmware Over The Air (FOTA) updates. The integrated GPS support allows a combination of GPS and cellular data to be used for more accurate positioning. The module measuring 10 x 16 x 1 mm, is suitable for even compact wearable consumer and medical devices, yet it is a complete solution that integrates ever |
|
Download Datasheet
Product Details | |
|
|
|
Satellite Communication Module for Battery Powered IoT Systems |
RF Module
from Astrocast
|
The Astronode S from Astrocast is a Satellite Communication Module for highly integrated, battery-powered IoT systems. This low-power module enables bi-directional satellite communication on a single battery for a period of up to 10 years. The Astrocast nanosatellite LEO network is designed to enable low latency global transmission of messages with additional unicast and multicast downlink capability. |
|
Download Datasheet
Product Details | |
|
|
|
Low-Power LTE IoT Modem from 700 MHz to 2.6 GHz |
Cellular Module
from Qualcomm
|
The QCX216 from Qualcomm is an LTE IoT Modem that operates from 700 MHz to 2.6 GHz. It delivers a peak download data rate of 10 Mbps and a peak upload data rate of 5 Mbps. This modem is based on a 204 MHz Arm Cortex Dual core M3 CPU and has an integrated LTE modem and RF transceiver. It is Global LTE Cat1.bis IoT-optimized and compliant with 3GPP Release 14 LTE specifications. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Bluetooth 5.2 Wireless Module for Industrial/Medical Applications |
RF Module
from Murata
|
The Type 2EG from Murata is a Bluetooth 5.2 Wireless Module for connected IoT edge devices in industrial and medical applications. It is based on Onsemi’s RSL15 SoC and has a built-in ARM Cortex M33 core with 80 kB RAM (including 64 kB user RAM) and 512 kB Flash. This module has an integrated IoT cybersecurity platform and supports Bluetooth’s higher throughput, increased broadcast capacity, improved channel co-existence algorithm (SCA), and long range and proximity features. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
5 GHz Integrated Wi-Fi 6 Front-End Module |
Front End Module
from Qorvo
|
The QPF4506B from Qorvo is a Wi-Fi 6 Front-End Module that operates from 5150 to 5850 MHz. It has been designed for Wi-Fi 802.11ax systems and offers a compact form factor with integrated matching that minimizes layout area in the application. This module consists of a 5 GHz power amplifier (PA), bypassable low noise amplifier (LNA), regulator, single pole double throw (SP2T) switch, logarithmic power detector, and a coupler. |
|
Download Datasheet
Product Details | |
|
|
|
Sub-GHz Wireless + 2.4 GHz Bluetooth LE SoC for IoT Applications |
Wireless Chipset
from Silicon Labs
|
The EFR32FG28 from Silicon Labs is a Sub-GHz Wireless + 2.4 GHz Bluetooth LE SoC that is designed for IoT applications. This SoC has a 32-bit 78 MHz ARM Cortex-M33 MCU with DSP instruction and a floating-point unit for efficient signal processing, up to 1024 kB flash program memory and up to 256 kB RAM data memory. It supports proprietary, CONNECT, Amazon Sidewalk, WM-BUS, Wi-SUN and Bluetooth Low Energy protocols. This SoC is available in a QFN68 package that measures 8.00 x 8.00 x 0.85 mm or a QFN48 package that measures 6.00 x 6.00 x 0.85 mm and is ideal for smart homes, security, lighting, building automation, and metering applications. |
|
Download Datasheet
Product Details | |
|
|
|
Wi-Fi 6, Bluetooth 5.2, and 802.15.4 Modules for IoT Applications |
RF Module
from u-blox AG
|
The MAYA-W2 Series from u-blox are Wi-Fi 6, Bluetooth 5.2, and 802.15.4 Modules that are designed for IoT applications. They provide SISO Wi-Fi 6 operation with data throughput of up to 600 Mbit/s (Wi-Fi 6) and support MU-MIMO to provide exceptional performance even in dense Wi-Fi environments. These modules are based on NXP IW611 or IW612 chips which provide OS driver integration in their application host BSPs and SDK support for NXP MCUs. |
|
Download Datasheet
Product Details | |
|
|
|
2.4/5 GHz Wi-Fi 6 MU-MIMO Module for IoT/Portable Devices |
RF Module
from SparkLAN
|
The AP6275HH3 from SparkLAN is a Wi-Fi 6 Module that supports IEEE802.11 ax/ac/a/b/g/n protocols for consumer and commercial applications. It enables Dual Band Dual Concurrent (DBDC) connections for multiple frequencies (2.4 and 5 GHz). This module is based on a Broadcom chipset and is designed with two spatial streams, i.e., two transmitters and two receivers, in the MU-MIMO mode. |
|
Download Datasheet
Product Details | |
|
|
|
5G/NB-IoT Flexible Printed Circuit (FPC) Antenna from 617 to 5850 MHz |
Antenna
from KYOCERA AVX
|
The 9001815F0 from KYOCERA AVX is a 5G and NB-IoT Flexible Printed Circuit (FPC) Embedded Antenna that operates from 617 to 960 MHz, 1415 to 2690 MHz, 3400 to 3800 MHz and 5150 to 5850 MHz. This linearly polarized antenna provides a gain of up to 4.81 dBi with efficiency from 35 to 60%. It has an omnidirectional radiation pattern and supports 2G/3G/4G/5G, LTE CAT-M, NB-IoT, SigFox, LoRa, and cellular LPWA technologies. |
|
Download Datasheet
Product Details | |
|
|
|
Miniature Chip Antenna for Wi-Fi & Bluetooth Applications |
Antenna
from Ignion
|
The NANO mXTEND™ (NN02-101) from Ignion is a Miniature Wi-Fi and Bluetooth Antenna that is optimized for operation from 2400 to 2500 MHz but can operate up to 8 GHz. It is the smallest off-the-shelf antenna for Wi-Fi with customizable performance. This linearly polarized antenna provides a peak gain of 2.4 dBi with an efficiency of more than 70%. The antenna measures 3.0 x 2.0 x 0.8 mm and has a dual mounting system that enables either corner or edge placement on the printed circuit board. It is ideal for use in IoT modules, smart home, tracking devices, wearables and gaming devices. |
|
Download Datasheet
Product Details | |
|
|
|
Wireless Test Platform for 5G-NR FR1/FR2 RedCap and Cellular IoT Applications |
RF Test Set
from Keysight Technologies
|
The E7515R UXM from Keysight Technologies is a 5G Wireless Test Platform that is optimized for 5G-NR RedCap and Cellular IoT (CIoT) testing. It supports the 3GPP 5G-NR Rel-17 and enables users to establish a 5G call with a device under test (DUT) and perform RF, protocol, functional, and performance tests to ensure standards-compliance and user experience of the device. |
|
Product Details | |
|