| Top Satellite Products in 2023 . |
|
|
|
|
|
|
|
| Advanced Satellite Link Emulator with 1 to 4 Channels | |
Satellite Link Emulator
from dBm Corporation
|
| The ACE9600 from dBm Corp is Satellite Link Emulator for simulating satellite to fixed/mobile ground stations, satellite-to-satellite RF link testing and Satellite Payload Emulation. It has an instantaneous bandwidth of up to 600 MHz and is based on a powerful hardware/DSP test platform that allows a variety of impairments to be inserted in real-time, enabling testing of a range of wireless receivers, UHF/VHF Radios, satellite payloads and satellite fixed & mobile ground and airborne transceivers in a controlled laboratory environment. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband Multi-Channel Satellite Link Simulator | |
Satellite Link Emulator
from Square Peg Communications Inc
|
| The RLS-2100 from Square Peg Communications is a comprehensive satellite channel simulator with unparalleled impairment simulation, real-time multi-satellite orbit calculation, full-motion support and integrated GPS simulators. It can provide end-to-end or single link simulation of wideband terrestrial and satellite networks, satellite selection via open standard interfaces, and facilities to enable seamless integration into more complex test beds if required. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka-Band 1.0 m Fly-Away SATCOM Terminal for Military Applications | |
SATCOM Terminal
from Norsat
|
| The GLOBETrekker™ 2.0 (GT100KAM004) from Norsat is a Fly-Away SATCOM Terminal that operates from 18.2 to 21.2 GHz (Rx) and 30 to 31 GHz (Tx). It has a 6-segment carbon fiber reflector with a diameter of 1.0 m and consists of a BUC, a universal LNB, and a 2-segment boom arm. This terminal can be completely assembled without tools in minutes and has a one-touch interface which enables rapid and easy deployment. |
| |
Download Datasheet
Product Details | |
|
|
|
| Vehicle-Mounted Driveaway Terminal from 7.25 to 31 GHz | |
SATCOM Terminal
from DataPath
|
| The CCT120-DA from DataPath is a Driveaway Terminal that operates from 7.25 to 21.2 GHz (Rx) and 7.9 to 31 GHz (Tx). It delivers an output power of 60 W (X band), has an EIRP of 54.2 dBW (X band) and a G/T (gain-to-noise-temperature) of 15.7 dB/K (X band). This terminal has an azimuth range of ±175° and an elevation range from 10° to 90°. |
| |
Download Datasheet
Product Details | |
|
|
|
| X-Band Low Noise Block Downconverter from 7.75 to 8.50 GHz | |
Low Noise Block
from AmpliTech
|
| The APT5-LNB-XBAND from AmpliTech is a Low Noise Block Downconverter that converts an input RF frequency from 7.75-8.50 GHz to output IF frequency from 800-1550 MHz. It provides over 56 dB of gain and has an output P1dB of more than 15 dBm. The LNB has a VSWR of less than 1.7:1, provides image rejection of above 30 dB, and has a phase noise density of -128 dBc for a 1 MHz frequency offset. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by MWC Barcelona | | | |
|
|
| Satellite Link Emulator from 950 to 1450 MHz for Closed-Loop Testing | |
Satellite Link Emulator
from Polaris
|
| The ASLE-L-200D from Polaris is a Satellite Link Emulator that operates in the L-Band from 950 to 1450 MHz (extendable up to 1950 MHz). It includes an L-band frequency converter, has a bandwidth of 200 MHz and provides a gain of up to 0 dB. This link emulator exhibits a time delay from 0 to 530 ms with a step size of 1 µs, a Doppler shift from -6 to +6 MHz with a step size of 1 Hz and an attenuation from 0 to 40 dB with a step size of 0.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Outdoor Block Downconverters for SATCOM Applications | |
Low Noise Block
from GeoSync Microwave
|
| The GS41 Series from GeoSync Microwave are Outdoor Block Downconverters that convert an input RF frequency of 10.7 - 31 GHz to an output frequency of 0.95-2.15 GHz. They provide more than 30 dB of gain with a P1dB of over 18 dBm and have a return loss of 18 dB. These downconverters have a noise figure of less than 14 dB and an image rejection of 70 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 W GaN Block Upconverter from 17.3 to 18.4 GHz | |
Block Up Converter
from Actox
|
| The ABE25UDBS from Actox is a DBS-Band Block Upconverter that converts input frequencies from 950 – 1700 MHz to output frequencies from 17.3 – 18.4 GHz. It has a 16.35 / 16.85 GHz dual LO that is electronically and manually switchable. This GaN BUC delivers an output power of 25 W (+44 dBm) with a gain of 68 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 325 W Antenna-Mount Power Amplifiers from 27 to 31 GHz | |
SATCOM Amplifier System
from Comtech Xicom Technology
|
| The XTD-750KaL from ComTech are Antenna-Mount High Power Amplifiers that operate from 27 to 31 GHz. They deliver a CW output power of 325 W (~55.1 dBm) with a small signal gain of more than 70 dB. These amplifiers have spurious levels and harmonics of -60 dBc. They are designed to offer compactness, low-cost installation, and a long life. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by MWC Barcelona | | |
|
|
| Ku-Band Transceivers from 10.95 to 14.50 GHz for VSAT Networks | |
SATCOM Transceiver
from Amplus Communication
|
| The AM-9446 Series from Amplus Communication are high performance Ku-band Transceivers designed for use in SCPC, DAMA and TDMA VSAT satellite earth stations. They operate from 13.75 to 14.50 GHz (Tx) and 10.95 to 12.75 GHz (Rx). In the Tx mode, they provide an output power (P1dB) of 100 W with a gain of 70 dB and gain adjustment of 25 dB in 0.5 dB steps. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka-Band SATCOM Transceiver Module | |
SATCOM Transceiver
from Skyware Technologies
|
| The DRC 3500 from Skyware Technologies is a Ka-Band SATCOM Transceiver that has a Tx frequency from 29 to 31 GHz and Rx frequency from 19.2 to 21.2 GHz. This device provides an output power of more than 37 dBm at the Tx with a gain of 58 dB. It has an integrated antenna feed chain with polarizer, a true 5 Watt BUC (10 W version available in H1 2015), a wide-band PLL LNB and an OpenBMIP Monitoring and Control facility – all in a single, IP67 rated, enclosure. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W GaN Solid-State Power Blockup Converter from 13.75 to 14.5 GHz | |
Block Up Converter
from Communications & Power Industries
|
| The CPKOG1430SOTM from Communications & Power Industries is a Solid-State Power Blockup Converter (SSPB) that converts an input frequency (IF) from 950-1700 MHz to an output frequency (RF) from 13.75-14.50 GHz. It delivers an output power of 50 W (~ +47 dBm) with a gain of more than 53 dB. This SSPB has a phase noise (LO) of -78 dBc/Hz (at 1 kHz offset) and spurious emissions and harmonics of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ku-Band Block-up Converters from 12.75 to 14.5 GHz | |
Block Up Converter
from Amkom Design Group Inc
|
| The ASKU (S, L, D) Series from Amkom Inc. are Ku-Band Block-up Converters that convert an input IF frequency from 950 - 1450 MHz or 950 - 1700 MHz to an output RF frequency from 12.75-14.5 GHz with 11.80 GHz, 13.05 GHz or 12.80 GHz local oscillators. These BUCs deliver a saturated output power of 20 W (43 dBm) and a linear power of 16 W (42 dBm) with a gain of 70 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| X-Band Earth Observation Low Noise Block from 7.75 to 8.5 GHz | |
Low Noise Block
from Orbital Research
|
| The LNBX-EO from Orbital Research is an X-Band Earth Observation Low Noise Block (LNB) Downconverter that converts an input RF frequency of 7.75 - 8.5 GHz to an IF frequency of 950 - 1700 MHz. It has a 6.8 GHz local oscillator (external reference). This LNB provides 60 dB of gain with a noise figure of 0.8 dB and has a P1dB of 15 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 17.7 to 22.2 GHz | |
SATCOM Amplifier System
from ACORDE
|
| The ACLNA-Ka-E45-V1 from Acorde is a Low Noise Amplifier that operates in the Ka-Band from 17.7 to 22.2 GHz. It provides a gain of more than 50 dB with a noise figure of less than 1.8 dB and has a P1dB of 20 dBm. The amplifier uses the latest technology to obtain the best noise figure, phase noise, gain stability and return losses according to MIL-STD-188-164C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Q/V–Band Switchable LO LNB from 37.5 to 42.5 GHz | |
Low Noise Block
from Swedish Microwave AB
|
| The Q/V–Band LNB from Swedish Microwave is a Low-Noise Block (LNB) that converts input frequencies from 37.5 – 42.5 GHz to output frequencies from 950 – 3450 MHz. It has a switchable LO from 36.55 to 40.55 GHz, provides a programmable gain from 40 to 55 dB, and image rejection of more than 30 dB. This LNB has a phase noise of -93 dBc/Hz (@100 kHz offset), a noise figure of less than 3.2 dB, and spurious levels of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable, Low-SWaP SATCOM Terminal from 17.5 to 31 GHz | |
SATCOM Terminal
from Get SAT Ltd
|
| The NANO SAT H from GET SAT is a SATCOM Terminal that operates from 27.5 to 31 GHz (Tx) and 17.5 to 21.2 GHz (Rx). This compact terminal has been optimized for on-the-move, man-carried portability, and mobility applications. It is designed for the Ka-band and supports the O3B MEO constellation. The terminal consists of a modem, antenna control unit (ACU), block upconverter (BUC), tracking sensors, low noise block (LNB) downconverter, and a complete RF front-end. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Block from 18.2 to 20.2 GHz for SATCOM Applications | |
Low Noise Block
from TTI
|
| The TTI-LNB-Ka-1820 from TTI is a Low Noise Block (LNB) that converts an input frequency from 18.2 – 20.2 GHz to an output frequency from 1 – 2 GHz. It has a 17.2/18.2 GHz local oscillator. This LNB provides 60 dB of gain, image rejection of more than 30 dB, and a noise figure of less than 1.5 dB. It has spurious levels of -60 dBc and an SSB phase noise of -93 dBc (@ 100 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Block from 17.7 to 21.2 GHz | |
Low Noise Block
from ERZIA
|
| The ERZ-LNB-1770-2120-75-1.5 from ERZIA is a Ka-Band Low Noise Block that converts input frequency from 17.7 – 21.2 GHz to an output frequency of 0.95 – 1.95 GHz. It provides a gain of up to 75 dB which can be adjusted in 0.5 dB steps and has a noise figure of less than 1.5 dB. This LNB comes with an inbuilt PLL for high reliability and dedicated screening of the LNB performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| C/X/Ku-Band Rugged and Transportable SATCOM Terminal | |
SATCOM Terminal
from ND SatCom GmbH
|
| The MTT 2400 from ND SatCom is a Multi-Band SATCOM Terminal that operates in the C-Band, X-Band, and Ku-Band. It has a Tx frequency range from 5.850 – 6.425 GHz, 7.90 – 8.40 GHz, 13.75 – 14.50 GHz, and an Rx frequency range from 3.625 – 4.2 GHz, 7.25 – 7.75 GHz, 10.95 – 12.75 GHz. This terminal is based on an ultra-compact platform and is designed for easy transportation and set-up. |
| |
Download Datasheet
Product Details | |
|
