| Featured Products this Week . |
|
|
| 12-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-12 from Copper Mountain Technologies is a 12-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. It can measure all s-parameters and supports linear frequency, log frequency, segment, and power sweep types. The analyzer enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times. |
| |
Download Datasheet
Product Details | |
|
|
|
| 63 W GaN Power Amplifier from 3.4 to 3.8 GHz for 5G mMIMO Applications | |
RF Amplifier
from Mitsubishi Electric US, Inc.
|
| The MGFS48G38MB from Mitsubishi Electric is a GaN Power Amplifier that operates from 3.4 to 3.8 GHz. It delivers a saturated output power of more than 63 W with a gain of over 28 dB and a power-added efficiency (PAE) of 43%. This power amplifier has an epitaxial growth layer structure that offers high efficiency and low distortion characteristics even when used in 5G environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 195 W Surface-Mount GaN Power Transistor from 1880 to 2025 MHz | |
RF Transistor
from RFHIC
|
| The H001C11A from RFHIC is a Power Transistor that operates from 1880 to 2025 MHz. It delivers a saturated output power of 195 W with a gain of 16 dB and a drain efficiency of 48%. This asymmetrical Doherty HEMT is based on GaN technology, requires a DC supply of 48 V and consumes less than 4.5 A of drain current. It is ideal for use in WiMAX, LTE, WCDMA, GSM, multi-band, multi-mode, multi-carrier, high-efficiency and Doherty amplifier applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16 dB Directional Coupler from 1 to 65 GHz | |
Directional Coupler
from KRYTAR
|
| The 101065016 from KRYTAR is a Directional Coupler that operates from 1 to 65 GHz. This 16 dB coupler has a directivity of more than 10 dB and an insertion loss of less than 2.8 dB. It can handle an average input power of 20 W and a peak input power of 3 kW. The coupler is available in a module that measures 2.5 x 0.5 x 0.65 inches and has 1.85 mm (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W, WR-28 Waveguide Junction Circulator from 26.5 to 40 GHz | |
Waveguide Circulator
from ERAVANT
|
| The SNF-28-C5 from Eravant is a Waveguide Junction Circulator that operates from 26.5 to 40 GHz. This Ka-Band isolator can handle a CW forward power of up to 20 W, provides an isolation of 15 dB, and has an insertion loss of less than 0.7 dB. It offers a much shorter insertion length for system integration compared to a Faraday isolator. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile LC Bandpass Filter with Passband from 5.8 to 9.2 GHz | |
Band Pass Filter
from Networks International Corporation
|
| The C-1362 from Networks International Corporation is a Low-Profile LC Bandpass Filter that has a passband from 5800 to 9200 MHz. It has a passband insertion loss of less than 3 dB and provides an out-of-band rejection of more than 50 dB. This bandpass filter offers a wideband performance and high out-of-band selectivity, making it suitable for a variety of X-band applications. |
| |
Download Datasheet
Product Details | |
|
|
| Download Magazine for Free | | |
|
|
| Test & Measurement Instrumentation Power Amplifier from 26.5 to 40 GHz | |
RF Amplifier
from Maury Microwave
|
| The MPA-26G5-40G-100 from Maury Microwave is a GaN Power Amplifier that operates from 26.5 to 40 GHz. It delivers a saturated CW output power of 100 W with a small signal gain of more than 50 dB. This instrumentation amplifier is burn-in, and aging tested for high reliability which includes prolonged storage under extreme temperature conditions, extended amplifier operation over the entire rated temperature range, and elongated usage at maximum power under CW and pulsed-CW conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| LoRaWAN Module with Support for Amazon Sidewalk | |
RF Module
from Oxit
|
| The OxTech Multi-Connectivity Module from Oxit is a LoRaWAN Module that integrates all the hardware and firmware materials required to connect to the Amazon Sidewalk Network. It supports low-bandwidth and long-range connections to the network leveraging a range of miles using Bluetooth for short distances and LoRa for a longer range (up to 10 miles). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 100 W Tetra Duplexer from 430 to 470 MHz | |
Multiplexer
from POLOMARCONI.IT
|
| The T06210736 from POLOMARCONI.IT is a Tetra Duplexer that operates from 430 to 470 MHz. It has a bandwidth of 3 MHz, a Tx/Rx distance of greater than 10 MHz, and an out-of-band attenuation (up to 2.8 GHz) of more than 40 dB. This duplexer can handle an input power of up to 100 W and provides a Tx/Rx isolation of more than 73 dB. It is available in a module that measures 197 x 95 x 130 mm with N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 8-Channel, M-Code GPS Anti-Jamming Processor for Airborne Applications | |
GNSS Anti-Jamming Solution
from Cobham Aerospace Connectivity
|
| The 7-6008 from Cobham Aerospace Connectivity is an 8-Channel GPS Anti-Jamming Digital Antenna Control Unit (DACU) that operates in the L1 and L2 bands. It has been designed to be used with an active controlled reception pattern array (CRPA) receiver unit. This M-Code-compliant anti-jam processor mitigates narrowband interference using an excision process and broadband interference by creating directed nulls in the antenna pattern, resulting in a significant anti-jam protection, even in highly dynamic, multi-jammer environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Shielded Low Noise Amplifier from DC to 8 GHz | |
RF Amplifier
from Lotus Communication Systems
|
| The LADC8G2SR from Lotus Communication System is a Flat Gain Low Noise Amplifier that operates from DC to 8 GHz. It provides a gain of 39 dB (gain flatness of ±1 dB) with a noise figure of 1.8 dB. This LNA requires a DC supply from 5.5 to 12 V and consumes 145 mA of quiescent current. It is available in a shielded RF enclosure that measures 1.50 x 0.94 x 0.49 inches and has SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation Tolerant TCXOs from 40 MHz to 100 MHz | |
TCXO
from Greenray Industries
|
| The T1282 Series from Greenray Industries are Radiation Tolerant TCXOs with a nominal frequency from 40 MHz to 100 MHz. They have ultra-low acceleration sensitivity for reliable phase noise performance in high-vibration and shock-sensitive applications. A precision thermistor network provides temperature compensation insensitive to radiation - and can handle up to 50 krad (Si) total ionizing dose. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1.2 kW Traveling Wave Tube (TWT) Amplifier from 8 to 18 GHz | |
RF Amplifier
from AMETEK CTS
|
| The TWT8G18G-1000 from AMETEK CTS is a Traveling Wave Tube (TWT) Amplifier that operates from 8 to 18 GHz. It delivers a saturated output power of 1.2 kW with a small signal gain of 60 dB. This TWT amplifier supports various modulation formats such as AM, FM, and pulse modulations. It includes a complete set of RF and hardware protection systems such as VSWR, over-current, voltage, TWT arc protection, redundant thermal, and airflow sensors to prevent over-heating or over-voltage-related damages. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz Scalable Cellular/Non-Cellular Radio Communication Tester | |
RF Test Set
from Rohde & Schwarz
|
| The R&S CMW500 from Rohde & Schwarz is a Compact Radio Communication Tester for the frequency range from 70 MHz to 3.3 GHz (optional up to 6 GHz). It is a fast and precise solution for production testing of current and future wireless devices such as mobile phones and tablets. The base model of this tester comes with a general-purpose RF power meter and CW generator with list modes for fast calibration of wireless devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP/CTIA/PTCRB-Ready Sub-6 GHz and mm-Wave 5G OTA Testing System | |
Antenna Measurement System
from EMITE Ingenieria
|
| The H300 from EMITE is a 5G OTA Test System that is designed for Sub-6 GHz and mm-Wave frequencies. It consists of a medium-sized anechoic chamber, a Compact Antenna Test Range (CATR) with a 100 x 100 cm serrated precision reflector (15 µm peak-to-peak roughness), a lateral-positioned tower and feed antenna (for frequencies from 3 to 40 GHz). |
| |
Download Datasheet
Product Details | |
|
|
|
| Qi 2.0 Compatible, 15 W In-Cabin Automotive Wireless Charging IC | |
Wireless Charging Transmitter
from indie Semiconductor
|
| The iND87200 from indie Semiconductor is an In-Cabin Automotive Wireless Charging IC that is compliant with Qi 1.3.2 and compatible with Qi 2.0. It supports the emerging maximum power point (MPP) wireless charging feature and has an integrated boost converter that can deliver up to 15W of power across the entire VBAT operating range. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 W Highly Integrated Wireless Power Transmitter Front End IC | |
Wireless Charging Transmitter
from Renesas
|
| The RA9460 from Renesas is a Wireless Power Transmitter Analog Front End IC. It supports more than 15 W of power delivery to a WPC 1.3 compliant Qi Power Receiver (PRx) and can deliver more than 60 W of power with proprietary high-speed charging solutions. The IC supports Qi-compliant bi-directional communication with FSK modulation and ASK demodulation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Beam Lens Antenna from 1695 to 4200 MHz for LTE Base Station Deployments | |
Base Station Antenna
from MatSing
|
| The MS-MBA-3.3-F4A3-H4A2 from Matsing Lens Antennas is a Multi-Beam Dual-Band Base Station Antenna that operates from 3300-4200 MHz (F-band) and 1695-2690 MHz (H-band). It is Lens Technology Enabled™ and utilizes a patented spherical lens design that provides a gain of 20 dBi and a horizontal coverage of 120°. This 45° dual-slant polarized antenna offers three beams each for the F and H bands and supports 4x4 MIM. |
| |
Download Datasheet
Product Details | |
|
|
|
| Adhesive-mount, Flexible 5G Antenna from 617 to 5925 MHz | |
Antenna
from 2J Antennas
|
| The 2JF0883Pa from 2J Antennas is a Flexible Polymer Antenna that operates from 617 – 960 MHz, 1427 – 2690 MHz, 3300 – 5000 MHz and 5150 – 5925 MHz. This linearly polarized antenna has an omnidirectional radiation pattern with an efficiency of 45%. It can handle an input power of up to 50 W, provides a peak gain of 3 dBi, and has a VSWR of less than 3.6:1. |
| |
Download Datasheet
Product Details | |
|
