New products this week. View it in your browser
| | | Weekly Edition | | | Date: 17 Jan, 2024 | | | |
| New RF and Microwave Products this Week . |
| Rugged 50 GHz Fixed Chip Attenuators for Space and Defence Applications | |
Fixed Attenuator
from Smiths Interconnect
| | The HR TXS Series from Smiths Interconnect are Fixed Chip Attenuators that operate up to 50 GHz. They are available in attenuation values from 1 to 20 dB and can handle input power of up to 3 W. These chip attenuators use robust thin-film process technology on an alumina substrate to provide a product suitable for harsh environments, such as space and defence applications. | | |
Download Datasheet
Product Details |
|
| LTCC Surface-Mount Bandpass Filter with Passband from 5.9 to 6.9 GHz | |
Band Pass Filter
from Mini Circuits
| | The BFHKI-6751+ from Mini-Circuits is an LTCC Bandpass Filter with a passband from 5.9 to 6.9 GHz. It has a passband insertion loss of less than 5.5 dB and provides an out-of-band rejection of more than 62 dB (lower band) and 50 dB (upper band). This filter is manufactured using an LTCC fabrication process that assures minimal RF performance variation while delivering a product that is well-suited for environmental extremes of high humidity and temperature. | | |
Download Datasheet
Product Details |
|
| 2.4 GHz Front-End RFIC for Wireless IoT Applications | |
Front End Module
from BeRex, Inc.
| | The 8TR8219 from Berex is a 2.4 GHz Multi-Function Smart Front-End RFIC. It is designed for 802.15.4 Zigbee/Thread, Bluetooth smart, and proprietary ISM wireless protocol systems in the 2.4 GHz band. This RFIC consists of a transmit power amplifier (PA), a receive low noise amplifier (LNA), and a single pole double throw (SPDT) transmit/receive switch in a single compact package. | | |
Download Datasheet
Product Details |
|
| Automotive-Grade SOI Reflective SPDT Switch from 0.3 to 10.6 GHz | |
RF Switch
from pSemi, A Murata Company
| | The PE423211 from pSemi is a Reflective SPDT RF Switch that operates from 0.3 to 10.6 GHz. This AEC-Q100 grade-2 qualified switch provides an isolation of more than 15 dB with an insertion loss of less than 0.6 dB and has a P1dB of 25 dBm. It is manufactured on pSemi’s Ultra-CMOS silicon-on-insulator (SOI) process and uses patented HARP™ technology. | | |
Download Datasheet
Product Details |
|
| Multi-Probe Antenna Measurement System from 400 MHz to 6 GHz | |
Antenna Measurement System
from Microwave Vision Group
| | The SG 24 from MVG is a Multi-Probe Antenna Measurement System for frequencies from 400 MHz to 6 GHz (extendable to 10 GHz). It has a dynamic range of 70 dB (from 0.4 – 6 GHz) and a measurement time of approximately 1 minute. This antenna measurement system uses near-field/spherical or far-field technology to measure parameters such as gain, directivity, beamwidth, cross-polar discrimination, sidelobe levels, front-to-back ratio, 1D, 2D and 3D radiation patterns, radiation pattern in any polarization (linear or circular), and more. | | |
Download Datasheet
Product Details |
|
| Wideband Multi-Channel Satellite Link Simulator | |
Satellite Link Emulator
from Square Peg Communications Inc
| | The RLS-2100 from Square Peg Communications is a comprehensive satellite channel simulator with unparalleled impairment simulation, real-time multi-satellite orbit calculation, full-motion support and integrated GPS simulators. It can provide end-to-end or single link simulation of wideband terrestrial and satellite networks, satellite selection via open standard interfaces, and facilities to enable seamless integration into more complex test beds if required. | | |
Download Datasheet
Product Details |
|
| 2-Port USB Controlled VNA from 300 kHz to 6.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
| | The M5065 from Copper Mountain Technologies is a 2-port metrology-grade Vector Network Analyzer that operates from 300 kHz to 6.5 GHz. It is available in an economical package that excludes a number of advanced features like vector mixer calibration, TRL calibration, frequency offset, time domain, and gating. The VNA has a dynamic range of 130 dB, an output power of 5 dBm, and typical measurement speed of 70 µs per point. | | |
Download Datasheet
Product Details |
|
| Amplified AWGN Noise Modules from 10 Hz to 18 GHz | |
Noise Source
from Noisecom
| | The NC1000 Series from Noisecom are Amplified AWGN Noise Modules that operate from 10 Hz to 18 GHz. They produce white Gaussian noise of up to +13 dBm and have a typical temperature coefficient of 0.025 dB/°C. These high noise power modules are designed for secure communications and signal jamming, while the low power noise modules with high crest factor are used for signal impairment in BER, and Jitter applications. | | |
Download Datasheet
Product Details |
|
| Low-Band Front-End Module for 3G/4G/5G Applications | |
Front End Module
from Skyworks Solutions
| | The SKY5A3043 from Skyworks is a Front-End Module that supports 2G, 3G, 4G, and 5G mobile bands. It consists of a low-band 3G/4G/5G PA block, low-band and high-band 2G PA blocks, a silicon controller containing the MIPI RFFE interface, RF band switches, antenna switches, a bi-directional coupler, integrated filters and low noise amplifier (LNA). | | |
Download Datasheet
Product Details |
|
| Balanced MMIC Mixer with Integrated 8x Multiplier from 75 to 110 GHz | |
Waveguide Mixer
from AT Microwave
| | The AT-8MIX-75110L from AT Microwave is a Balanced MMIC Mixer MMIC that has an RF/LO frequency from 75 to 110 GHz and an IF frequency from DC to 10 GHz. The LO frequency from 9.375 to 13.75 GHz can be multiplied by an integrated 8x active frequency multiplier based on the RF Frequency. The mixer has a conversion loss of 10 dB and provides LO-to-IF isolation of 40 dB. | | |
Download Datasheet
Product Details |
|
| 2-Way Resistive Power Divider MMIC from DC to 70 GHz | |
Power Divider
from Marki Microwave
| | The MPDR-0070CSP2 from Marki Microwave is a 2-way Resistive Power Divider MMIC that operates from DC to 70 GHz. It has an insertion loss of less than 3 dB, an amplitude balance of ±1 dB, and a phase balance of ±10°. This in-phase power divider is fabricated using passive GaAs MMIC technology that allows the production of smaller devices and replaces larger form-factor circuit board constructions. | | |
Download Datasheet
Product Details |
|
| 25 W Coaxial RF Termination from DC to 6 GHz | |
Termination
from MECA
| | The 407-7 from MECA is an RF Termination that operates from DC to 6 GHz. It can handle an average power of 25 W and a peak power of 3 kW. This 50-ohm termination has a VSWR of less than 1.30:1 and is available in an aluminium package that measures 2.77 x 1.62 inches with an SMA-male connector. | | |
Download Datasheet
Product Details |
|
| High Stability Low Phase Noise 200 MHz TCXO | |
TCXO
from Dynamic Engineers
| | The TCXO1496BJ-200MHz-A-V from Dynamic Engineers is a Temperature-Compensated Crystal Oscillator (TCXO) that operates at 200 MHz. It provides a sinewave output with a frequency stability (vs temperature) of ±0.28 ppm and has a phase noise of -147 dBc/Hz (at 10 kHz offset). This TCXO requires a DC supply of 3.3 V and consumes less than 40 mA of current. | | |
Download Datasheet
Product Details |
|
| Automotive-Grade 2.4/5/6 GHz Wi-Fi 6E and Dual-Mode Bluetooth 5.3 Modules | |
RF Module
from u-blox AG
| | The JODY-W6 Series from u-blox are Tri-band Wi-Fi 6E and Dual-Mode Bluetooth 5.3 Modules that operate in the 2.4, 5 and 6 GHz bands. They are based on the automotive-qualified NXP AW693 chip and are AEC-Q104 automotive-qualified qualified manufactured in line with ISO/TS 16949. These modules support dual-mode Bluetooth 5.3 BR/EDR and LE features, such as high data rates, extended advertising, long-range, and the use of isochronous channels for LE Audio, fully simultaneously to Wi-Fi operation. | | |
Download Datasheet
Product Details |
|
| 3.6 Gbps, 2.4/5/6 GHz Wi-Fi 7 and Bluetooth 5.3 Combo Module | |
RF Module
from Quectel
| | The FGE576Q from Quectel is a Wi-Fi 7 and Bluetooth 5.3 Combo Module that operates in the 2.4, 5 and 6 GHz bands. It delivers a data rate of up to 3600 Mbps and supports dual-band simultaneous operation on 2.4 GHz + 5 GHz and 2.4 GHz + 6 GHz. This module has 160 MHz bandwidth for Wi-Fi, supports the 4K-QAM modulation technique and ultra-low latency for real-time response. | | |
Download Datasheet
Product Details |
|
| L1/L2-Band Multi-Constellation GNSS Antenna with RTK/PPP-RTK Support | |
GPS/GNSS Antenna
from Tallysman Wireless
| | The TW5794 from Tallysman Wireless is an L1/L2-Band GNSS Antenna with a PPP-RTK accuracy of sub 6 cm and RTK accuracy of sub 1 cm. It supports concurrent tracking of GPS, BeiDou, Galileo, and GLONASS constellations and offers high availability for PPP-RTK or RTK solutions with a quick convergence time. This antenna also has an L-Band correction receiver for stand-alone RTK for precise point positioning. | | |
Download Datasheet
Product Details |
|
| Automotive-Grade Multi-Constellation GNSS PCB Antenna from 1559 to 1610 MHz | |
GPS/GNSS Antenna
from KYOCERA AVX
| | The A1001011 from KYOCERA AVX is an Automotive-Grade GPS/GNSS Antenna that operates from 1559 to 1610 MHz. This antenna provides a peak gain of 1 dBi and has an average efficiency of more than 41%. It supports GPS, GLONASS, BEIDOU, and GALILEO constellations in the L1/ G1/B1/E1 bands. The antenna utilizes IMD technology that enables the advanced antenna design that delivers superior performance in reception-critical applications. | | |
Download Datasheet
Product Details |
|
| 20 W, Compact Block Up-Converter from 29 to 31 GHz | |
Block Up Converter
from Mission Microwave
| | The Cube-Ka-20 Watt Cube from Mission Microwave is a Ka-Band Block Up-Converter that converts input frequencies from 950 – 1950/1000 – 2000 MHz to output frequencies from 29 – 30/30 – 31 GHz. It delivers an output power of up to 20 W (43 dBm) with a gain of 60 dB and has a phase noise of -105 dBc/Hz (@1 MHz offset). | | |
Download Datasheet
Product Details |
|
| Twin-Diplexed Tower Mount Amplifier from 555 to 2200 MHz | |
Tower Mount Amplifier
from CommScope
| | The TMAT1921B68-21-43 from CommScope is a Tower Mount Amplifier (TWA) that operates from 555 to 894 MHz and 1695 to 2200 MHz. On the Tx side (downlink), it has an insertion loss of less than 0.45 dB and provides an out-of-band rejection of more than 55 dB while on the Rx side (uplink), it provides a gain of 12 dB with a noise figure of 1 dB. | | |
Download Datasheet
Product Details |
|
| Ethernet-Powered 5 GHz Outdoor WLAN Access Point | |
Microwave Backhaul Radio Links
from Ligowave
| | The LigoVision 5-15ac from LigoWave is an Outdoor WLAN Access Point that operates in the 5 GHz band. It supports channel bandwidths up to 80 MHz and delivers a data rate of up to 866 Mbps at 80 MHz channel bandwidth. This access point supports IEEE 802.11a/n/ac and iPoll 3 WLAN standard and dual 2×2 MIMO radio mode. | | |
Download Datasheet
Product Details |
|
| Rugged, Vehicle-Mount Sub-6 GHz 5G + Wi-Fi 6 + GNSS Access Point | |
Antenna
from Airgain
| | The AirgainConnect® Fleet™ from Airgain is an Integrated Sub-6 GHz Vehicle-Mount Access Point for 5G, Wi-Fi 6 and GNSS connectivity. It supports cellular 5G-NR/4G-LTE connectivity (FR1, Cat 19 DL / Cat 18 UL), dual-band Wi-Fi 6 connectivity (2.4 GHz and 5 – 6 GHz) and GNSS connectivity (L1 band). This integrated solution supports 4x4 downlink and 2x2 uplink MIMO in the cellular chain (supports eSIM) and 2x2 MU-MIMO in the Wi-Fi chain. | | |
Download Datasheet
Product Details |
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
