Top stories this week. View it in your browser
| | | 5G Update | | | Date: 18 Jan, 2024 | | | |
| Download Magazine for Free | | |
| Sponsored by MWC Barcelona | | | |
| New 5G White Papers & Articles |
|
|
| Upcoming Event | |
| 5G EXPO 2024 | | Date: 13 to 15 February, 2024 | | Location: Fort Lauderdale, Florida, USA | |
| |
|
|
| New 4G/5G Products . | |
|
| Mixed Signal Front-End Transceiver for 5G mmWave Applications | |
RF Transceiver
from Analog Devices
|
| The AD9088 from Analog Devices is a Highly Integrated Mixed Signal Front-End Transceiver. It is well suited for applications that require both wideband ADCs and DACs to process signal (s) having wide instantaneous bandwidth. This front-end consists of a 16-bit DAC with a sampling rate of 16 Giga Samples per second (GSPS) and a 12-bit ADC with a sampling rate of 8 GSPS. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| Dual Channel IF Transceiver IC from 37 to 48.2 GHz | |
RF Transceiver
from Anokiwave
|
| The AWMF-0196 from Anokiwave is a Dual Channel IF Transceiver IC that operates from 37 to 48.2 GHz covering n260, n259, and n262 3GPP bands. It has integrated dual Tx single-sideband up-conversion, dual Rx image-reject down-conversion functionality, and an on-chip PLL/VCO LO synthesizer that enables 2T2R applications. |
| |
Download Datasheet
Product Details | |
| | |
| Differential-to-Single-Ended RF Amplifier from 4.4 to 5 GHz | |
RF Amplifier
from iCana
|
| The ICASD4450-D2S from iCana is a Differential-to-Single-Ended Gain Amplifier that operates from 4.4 to 5.0 GHz. It provides a gain of 16.5 dB with a noise figure of 3.6 dB and has an output P1dB of 17 dBm. This amplifier is manufactured using GaAs technology that exhibits low noise figures and high linearity, allowing it to be used in both receiver and transmitter applications. It is is ideal for 3GPP 5G NR FR1 band n79, massive MIMO, and wireless infrastructure applications. |
| |
Download Datasheet
Product Details | |
| | |
| Low-Band Front-End Module for 3G/4G/5G Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY5A3043 from Skyworks is a Front-End Module that supports 2G, 3G, 4G, and 5G mobile bands. It consists of a low-band 3G/4G/5G PA block, low-band and high-band 2G PA blocks, a silicon controller containing the MIPI RFFE interface, RF band switches, antenna switches, a bi-directional coupler, integrated filters and low noise amplifier (LNA). |
| |
Download Datasheet
Product Details | |
| | | |
|
| |
| Sponsored by MWC Barcelona | | |
| | |
|
| | |
| Beamforming Front-End IC from 26.5 to 29.5 GHz for 5G Phased Array Systems | |
Beamforming IC
from Sivers Semiconductors
|
| The SUMMIT2629e from Sivers Semiconductors is a Beamforming Front-End IC that operates from 26.5 to 29.5 GHz. It has an eight-channel RF front-end for 5G phased array antenna systems and is fabricated using RF-Silicon on Insulator (RF-SOI) technology. This IC has integrated power amplifiers (PA), low noise amplifiers, T/R switching, beamformers with beam table memory, calibration, gain control, and temperature and power telemetry. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | |
| 5G RedCap Module with 4G LTE Fallback and URLLC Support | |
Cellular Module
from Quectel
|
| The RM255C-GL from Quectel is a 5G RedCap Module that has been designed for the global market and covers nearly all the mainstream carriers worldwide. It is based on the 3GPP Release 17 RedCap technology which supports 5G SA modes and offers backward compatibility with the existing 4G LTE network. This module supports 5G URLLC and L1+L5 precise and power-optimized positioning to greatly simplify product design and provide more dependable positioning capability. |
| |
Download Datasheet
Product Details | |
| | |
| Multi-band, 3GPP Rel-16 5G NR/LTE-FDD/LTE-TDD/HSPA+ Module | |
Cellular Module
from SIMCom
|
| The SIM8260G-M2 from SIMCom is a Multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ Module. It supports 3GPP Release-16 5G NSA/SA architectures with an uplink data rate of 3.47 Gbps (5G NSA) and a downlink data rate of 0.9 Gbps (5G SA). This module supports GNSS constellations. It has multiple integrated interfaces such as PCIe, USB 3.1, GPIO, etc. |
| |
Download Datasheet
Product Details | |
| | |
| Sub-6 GHz 5G Small Cell + 2.4/5/6 GHz Wi-Fi 7 Integrated Access Point | |
Microwave Backhaul Radio Links
from BLiNQ Networks
|
| The PCW-400i from BlinQ Networks is an Integrated Enterprise 5G Small Cell and Wi-Fi 7 Access Point (AP). It operates in the n48, n77 and n78 bands for 5G connectivity and 2.4/5/6 GHz bands for Wi-Fi connectivity. This access point can support up to 128 users simultaneously and has an integrated antenna to provide 360° coverage and eliminate dead zones in the network. |
| |
Download Datasheet
Product Details | |
| | | |
|
| | | |
|
| | |
| Rel-16 5G Modules with 4G/3G/2G Fallback for Automotive Applications | |
Cellular Module
from Rolling Wireless
|
| The RN94xx from Rolling Wireless are 5G Modules with 4G (LTE Cat19)/3G/2G fallback designed for automotive applications. These modules are tested to the automotive industry’s toughest specifications. They provide a host of enhancements for automotive applications, including support for 5G Release-16, a high-performance multicore application processor, an integrated hardware engine for security features, and ASIL safety support. |
| |
Download Datasheet
Product Details | |
| | |
| Real-Time Spectrum Analyzer for Monitoring Sub-6 GHz/mmWave 5G Networks | |
RF Spectrum Analyzer
from Aaronia AG
|
| The Spectran V6 5G from Aaronia is a Real-Time Spectrum Analyzer (RTSA) that operates with a frequency range from 250 MHz to 7.125 GHz and 24 to 53 GHz. It has a real-time bandwidth (Rx) of 60 MHz with a sweep speed of 3 THz/s and can scan 6 GHz of spectrum in less than 10 ms. This RTSA has a resolution bandwidth from 62 mHz to 200 MHz, a DANL of -170 dBm/Hz (with internal pre-amplifier ON) and an amplitude accuracy of ±0.5 dB (compensated by FIR filter). |
| |
Download Datasheet
Product Details | |
| | |
| Multi-Probe Antenna Measurement System from 400 MHz to 6 GHz | |
Antenna Measurement System
from Microwave Vision Group
|
| The SG 24 from MVG is a Multi-Probe Antenna Measurement System for frequencies from 400 MHz to 6 GHz (extendable to 10 GHz). It has a dynamic range of 70 dB (from 0.4 – 6 GHz) and a measurement time of approximately 1 minute. This antenna measurement system uses near-field/spherical or far-field technology to measure parameters such as gain, directivity, beamwidth, cross-polar discrimination, sidelobe levels, front-to-back ratio, 1D, 2D and 3D radiation patterns, radiation pattern in any polarization (linear or circular), and more. |
| |
Download Datasheet
Product Details | |
| | |
| Rugged, Vehicle-Mount Sub-6 GHz 5G + Wi-Fi 6 + GNSS Access Point | |
Antenna
from Airgain
|
| The AirgainConnect® Fleet™ from Airgain is an Integrated Sub-6 GHz Vehicle-Mount Access Point for 5G, Wi-Fi 6 and GNSS connectivity. It supports cellular 5G-NR/4G-LTE connectivity (FR1, Cat 19 DL / Cat 18 UL), dual-band Wi-Fi 6 connectivity (2.4 GHz and 5 – 6 GHz) and GNSS connectivity (L1 band). This integrated solution supports 4x4 downlink and 2x2 uplink MIMO in the cellular chain (supports eSIM) and 2x2 MU-MIMO in the Wi-Fi chain. |
| |
Download Datasheet
Product Details | |
| | |
| 5G Flexible PCB Antenna from 600 MHz to 8 GHz | |
Antenna
from Taoglas
|
| The FXUB85.07.0150C from Taoglas is a 5G Flexible PCB Antenna that operates from 600 MHz to 8 GHz. This linearly polarized antenna has an omnidirectional radiation pattern and an efficiency of up to 80%. It can handle an input power of 5 W and provides a peak gain of 5.6 dBi. The antenna covers 5G-NR, FR1, LTE, LTE-Advanced, WCDMA, HSPA, HSPA+, TD-SCDMA, CBRS, and Wi-Fi 6 bands. |
| |
Download Datasheet
Product Details | |
| | |
| Sub-6 GHz Adhesive-Mount Flexible Antenna | |
Antenna
from 2J Antennas
|
| The 2JF0783P from 2J Antennas is a 5G NR Antenna that operates from 617 – 960 MHz, 1427 – 2690 MHz, 3300 – 5000 MHz and 5150 – 5925 MHz. This linearly polarized antenna has an omnidirectional radiation pattern with an efficiency of up to 51.4 %. It provides a peak gain of 6.3 dBi and has a VSWR of less than 3.2:1. The antenna covers 5G-NR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NB, NB-IoT 3G and 2G bands. |
| |
Download Datasheet
Product Details | |
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, articles, interviews and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
