| Featured Products this Week . |
|
|
| 400 W Solid State Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2077-LC from Exodus Advanced Communications is a Solid-State High-Power Amplifier that operates from 2.0 to 6.0 GHz. It delivers a CW/Pulsed output power of over 400 W and a gain of more than 56 dB. This Class A/AB linear amplifier has spurious levels of less than -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Precision-Calibrated Waveguide Noise Source from 140 to 200 GHz | |
Noise Source
from ERAVANT
|
| The STZ-14420412-05-IT2 from ERAVANT is a Precision-Calibrated Noise Source that operates from 140 to 200 GHz. It has an excess noise ratio (ENR) of 12 dB and an ENR flatness of ±4 dB. This noise source is designed with improved port return loss for high reliability and accurate noise figure measurements. It can work either in CW or pulsed AM mode up to 1 kHz, depending on the driving signal. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB/LAN Controlled Thermal Power Sensor from 110 to 170 GHz | |
RF Power Meter & Sensor
from Rohde & Schwarz
|
| The R&S®NRP170TWG(N) from Rohde & Schwarz is a Thermal Power Sensor with a frequency range from 110 to 170 GHz. It has a dynamic range of -35 to +20 dBm and can perform up to 500 measurements per second. This plug-and-play power sensor is fully calibrated for long-term stability and is designed to reduce measurement noise and drift while maintaining accuracy. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| USB Powered and Controlled 4-Way Smart Switch from 850 to 2150 MHz | |
RF Switch
from ETL Systems
|
| The CST-POE-SW04-1082 from ETL Systems is a 4-Way Smart Switch that operates from 850 to 2150 MHz. It can handle an input power of up to 10 dBm (~10 mW), has an insertion loss of 5 dB, and provides an isolation of more than 65 dB. This switch is suitable for 1x4 or 4x1 switching. It is PoE 802.3af compliant with power and remote control via an Ethernet port and consumes less than 6 W of power. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by MWC Barcelona | | |
|
|
| GaAs IQ Mixer MMIC from 10 to 40 GHz | |
RF Mixer
from Marki Microwave
|
| The MMIQA-1040HPSM from Marki Microwave is a GaAs IQ Mixer MMIC that has an RF/LO frequency from 10 to 40 GHz and an IF frequency from DC to 10 GHz. It has a conversion loss of less than 16 dB and provides an image rejection of 29 dBc. This mixer has a noise figure of 12 dB, an amplitude balance of 0.2 dB and a phase balance of 5°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W, Uni-Directional Fixed Attenuators from DC to 8.4 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HFFE-XXX-100/8 Series from JFW Industries are Uni-directional Fixed Attenuators that operate from DC to 8.4 GHz. They are available in attenuation values of 6, 10, 20, 30, and 40 dB with an attenuation accuracy of ±1.3 dB. These attenuators can handle a Uni-directional RF input power of 100 W, a reverse power of 20 W, and a peak power of 1 kW (5 microsecond pulse, 1% duty cycle). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Power Divider from 25 to 40 GHz | |
Power Divider
from SRTechnology Corporate
|
| The D05-A1040-01 from SRTechnology is a 2-Way Power Divider that operates from 25 to 40 GHz. It has an insertion loss of less than 1.2 dB and provides more than 17 dB of isolation. The divider can handle an average input power of 10 W and has a VSWR of less than 1.90:1. It has an amplitude unbalance of 0.8 dB and a phase unbalance of 10 degrees. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB Directional Coupler from 2 to 8 GHz | |
Directional Coupler
from Narda-MITEQ
|
| The 27005-30 from Narda-MITEQ is a Directional Coupler that operates from 2 to 8 GHz. It has a nominal coupling value of 30 dB with a deviation of ±1.0 dB and a directivity of over 16 dB. This directional coupler can handle up to 400 W of average power and has a peak power rating of 5 kW. It has a frequency sensitivity of ±0.5 dB and an insertion loss of less than 0.25 dB with a VSWR of less than 1.4. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x4 Butler Matrix from 0.7 to 2.2 GHz | |
Butler Matrix
from KRYTAR
|
| The KBM9007022 from KRYTAR is a 4x4 Butler Matrix that operates from 0.7 to 2.2 GHz. It has a phase imbalance of ± 3 degrees and an amplitude imbalance of ± 0.4 dB. This butler matrix has an insertion loss of less than 8 dB and an isolation of more than 16 dB with a VSWR of less than 1.2:1. It is available in a package that measles 11.95 x 4.80 x 1.35 inches and has SMA female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Rugged Flexible Test Cable from 300 MHz to 110 GHz | |
RF Cable Assembly
from MegaPhase
|
| The TM70 (RF Orange®) from MegaPhase is a Flexible Test Cable that operates from 300 MHz to 110 GHz. It is a rugged, armored test cable that exhibits excellent VSWR, phase, and amplitude stability with flexure and temperature. This cable is designed to provide a long service life with repeatable performance throughout the life cycle of the cable. It has an outer diameter of 0.285 inches and a minimum bend radius (static) of 1.5 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4D Digital Imaging Automotive Radar-on-Chip from 76 to 81 GHz | |
Automotive Radar Chipset
from Uhnder, Inc
|
| The S80 from Uhnder is a 4D Digital Imaging Radar-on-Chip (RoC) that operates from 76 to 81 GHz. It has a phase-modulated continuous-wave (PMCW), multiple-input multiple-output (MIMO) radar architecture that is capable of processing up to 192 virtual channels. This chip supports 12 transmit antenna channels (Tx), 16 receive antenna channels (Rx) and can be cascaded up to 4 levels. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integration-Ready 60 GHz Radar Module for Compact Commercial Products | |
Radar Sensor
from Acconeer AB
|
| The Entry+ Module XM125 from Acconeer is a Radar Module for compact commercial products. It has integrated baseband, RF front-end, and antenna-in-package with a detection range of 20 meters. This module is optimized for high-precision people presence detection with the capability to recognize movement within configurable zones, motion detection, parking space occupancy detection, and level measurement (for example in tanks or waste containers) with configurable update frequency. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q101 Qualified Silicon PIN Diode for Automotive Applications | |
RF PIN Diode
from MACOM
|
| The MADP-011165-Q1279T from MACOM is an Automotive-Qualified Silicon PIN Diode that is designed to provide low-loss and high-isolation switching in an industry-standard package. It can handle a CW input power of up to 1 W (~30 dBm) and supports a forward current of up to 150 mA. This AEC-Q101-qualified PIN diode can operate either as a switch or an attenuator in automotive compensators, telematic control, and smart antenna systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Coaxial TEM Single Loop Coupler from 2 to 8 GHz | |
Directional Coupler
from Scientific Microwave Corporation
|
| The SMC-073TEM0208 from Scientific Microwave Corporation is a TEM Single Loop Coupler that operates from 2 to 8 GHz. It is available in coupling values from 30 to 60 dB with a directivity of 14 dB and has a VSWR of 1.4:1. This coupler is available in a module with various coaxial connector options and also has an option for pressurized and TVAC units. |
| |
Download Datasheet
Product Details | |
|
|
|
| Average Statistical Power Sensor from 350 MHz to 6 GHz | |
RF Power Meter & Sensor
from Bird
|
| The 7022 from Bird Technologies is a statistical power sensor, designed to measure a wide range of RF measurements for non-periodic signals such as EVDO, UMTS, LTE, and HDTV. It operates from 350 MHz to 6 GHz and measures power levels from 250 mW to 500 W. In addition to measuring the statistical properties of digital waveforms, it provides a complete range of other RF measurements including forward and reflected average power, VSWR, and return loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| Free Running Dielectric Resonator Oscillator from 1 to 40 GHz | |
DRO
from Exodus Dynamics
|
| The EDRO-1000 from Exodus Dynamics is a Free Running Dielectric Resonator Oscillator (DRO) that operates from 1 to 40 GHz. It utilizes advanced MIC and MMIC technologies to generate precise, reliable, and ultra-low noise signals at microwave and mmWave bands up to 40 GHz. The DRO is available in a uni-package that has been designed to mechanically withstand harsh environmental conditions due to Shock / Vibration, Temperature and Humidity. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Battery-Powered Class A/B Bidirectional Amplifier from 768 to 869 MHz | |
RF Amplifier
from Westell Technologies
|
| The CS40-734834-CAN from Westell Technologies is a Bidirectional Amplifier (BDA) that operates from 798 – 824 MHz (uplink) and 768-776 MHz/851-869 MHz (downlink). It delivers an output power of 2.5 W (~34 dBm) with a gain of 75 dB and has a noise figure of less than 7 dB. This amplifier represents the next revolution in public safety DAS designs, offering the most flexible platform available on the market. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.2 m Multiband VSAT System from 3.4 to 31 GHz for Marine Applications | |
SATCOM Terminal
from Orbit Communication Systems
|
| The OceanTRx 7 from Orbit Communication Systems is a Multiband Stabilized Maritime VSAT System that operates from 5.85 to 31 GHz (Tx) and 3.4 to 21.2 GHz (Rx). It has a dual offset Gregorian antenna type with an antenna size of 2.2 m. This VSAT consists of electronically switchable C/Ka and Ku/Ka multiband terminals to provide customers with unprecedented flexibility, enabling hybrid GSO and MEO/LEO interoperability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 GS/s, 12-bit High-Performance Digitizers with a Bandwidth of 4.7 GHz | |
PXI Digitizer
from Spectrum Instrumentation
|
| The M5i.33xx-x16 from Spectrum Instrumentation are 12-bit High-Speed Digitizers. They have up to 2 analog-input channels, and 4 digital-input channels and support sampling rates of up to 10 GS/s (1 channel) with a signal bandwidth of up to 4.7 GHz. The high bandwidth and fast sampling allow signals to be analyzed for frequency content anywhere from DC to the Nyquist limit (half the sample rate, or up to 5 GHz). |
| |
Download Datasheet
Product Details | |
|
