| Featured Products this Week . |
|
|
| 218 W GaN TWTA-Replacement Spatial Combining Amplifier from 2 to 18 GHz | |
RF Amplifier
from Qorvo
|
| The QPB0220N from Qorvo is a GaN Solid-State Spatial Combining Amplifier that operates from 2 to 18 GHz. It delivers a saturated output power of 218.8 W (~53.4 dBm) with a small signal gain of 16 dB and a power-added efficiency (PAE) of 19.5%. This power amplifier is based on Qorvo’s patented and field-proven Spatium combining technology that provides excellent performance in a light, rugged, compact module, thereby reducing the total cost of ownership compared to alternative technologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| Upconverter and Downconverter for 5G Radios from 24 to 29.5 GHz | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1128A from Analog Devices is a Microwave Upconverter and Downconverter that is designed for 5G radios from 24 to 29.5 GHz. It has an integrated upconverter (a transmitter), a downconverter (a receiver), and a LO chain with options of a 2x or 4x multiplier in one chip. Both upconverters and downconverters offer two modes of frequency translation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Tunable Frequency Synthesizer from 70 MHz to 16 GHz | |
Frequency Synthesizer
from Quantic MWD
|
| The MDS-500 from Quantic MWD is a Tunable Frequency Synthesizer with a tuning frequency range from 70 MHz to 16 GHz. It has a bandwidth of 150 MHz, provides an output power of +16 dBm with a phase noise of -90 dBc (at 16 GHz), and has a frequency stability of ±0.025 ppm/°C. This frequency synthesizer has an internal voltage regulator, microcontroller unit, power management unit (PMU), VCO, and RF frontend module (FEM). It is ideal for use in test equipment, space, military, industrial, transmitters/receivers, up/down converters, and test equipment applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 GHz Portable, Battery-Operated Software-Defined RF Analyzer | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The FieldFox N9912C from Keysight is a Handheld RF Analyzer for a frequency range of up to 10 GHz. This software-defined analyzer is fully upgradable with license-key activated frequency range, bandwidth, and various other features. This battery-operated system can address cable and antenna tests (CAT), real-time spectrum analysis and/or vector network analysis (VNA), and over-the-air digital demodulation analysis required for your application. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Spectrum Analyzer from 9 kHz to 54 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Field Master Pro MS2090A from Anritsu is a RF handheld spectrum analyzer that operates up to 54 GHz and has a real-time spectrum analysis bandwidth of up to 100 MHz. It has a Displayed Average Noise Level (DANL) of less than -160 dBm and Third Order Intercept (TOI) of +20 dBm, for more accurate spectrum clearing, radio alignment, and harmonic and distortion measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4/8-Channel Oscilloscopes with Bandwidths up to 2 GHz | |
Oscilloscope
from Rohde & Schwarz
|
| The R&S®MXO 5 Series from Rohde & Schwarz are Oscilloscopes that are available in four and eight-channel models. They have bandwidth options of 100 MHz, 200 MHz, 350 MHz, 500 MHz, 1 GHz, and 2 GHz. These oscilloscopes have two MXO-EP (extreme performance) Rohde & Schwarz application-specific integrated circuits (ASIC) to perform 4.5 million acquisitions per second and 18 million waveforms per second across multiple channels. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable Spectrum Recording System from 9 kHz to 8/18 GHz | |
RF Spectrum Recording and Playback System
from CRFS
|
| The RFeye® SenS Portable is a Lightweight I/Q Recorder for high-fidelity, long-duration RF recording and signal extraction from 9 kHz to 8/18 GHz. This recorder has a real-time bandwidth of 100 MHz and can store up to 12 hours of spectrum recordings in its internal 25.6 TB SSD. This recorder uses the DeepView software interface from CRFS that allows users to quickly find and extract the required signals. It is ideal for capturing live, real-world signals in their native environment – without sacrificing RF recording quality. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4/5 GHz Wi-Fi 6 + Bluetooth 5.2 Module for Automotive Applications | |
RF Module
from NXP Semiconductors
|
| The AW611 from NXP Semiconductor is a 2.4/5 GHz Wi-Fi 6 (802.11ax) and Bluetooth (LE) 5.2 Module. It is optimized for the automotive market with AEC-Q100 Grade 3 qualification. This module has a Wi-Fi subsystem that integrates a Wi-Fi MAC, baseband, and direct-conversion radio with PA, LNA and transmit/receive switch and removes the need for an RF front-end module (FEM). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-band Front-End Module for 4G/LTE and 5G NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58109-51 from Skyworks is a Front-End Module for multi-band 4G/LTE and 5G NR applications. It consists of power amplifier (PA) blocks, low-noise amplifier (LNA) blocks, integrated bi-direction RF coupler with cascade support, and duplexers for LTE Bands 1, 3, 40, 32, 25, 66, 30, 7, 41, 34, 39. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W High-Efficiency GaN Amplifier from 2.4 to 2.5 GHz | |
RF Transistor
from Gallium Semiconductor
|
| The GTH2e-2425300P from Gallium Semiconductor is a GaN-on-SiC Amplifier that operates from 2.4 to 2.5 GHz. It delivers a CW output power of 300 W with a gain of 17 dB and has an efficiency of up to 76%. This amplifier has been designed to simplify the integration into various systems, enhancing the development process of RF engineers. This HEMT requires a DC supply of 50 V and is powered by a supply rail. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 Ohm GaAs IPD Termination MMIC from DC to 50 GHz | |
Termination
from AmpliTech
|
| The AGTRM050 from AmpliTech is a GaAs IPD Termination MMIC that operates from DC to 50 GHz. This 50-ohm termination has a return loss of 18 dB. It is available as a die that measures 1.00 x 0.75 x 0.10 mm with an option for AC and DC-coupled RF port. This termination is ideal for use in communication systems, point-to-point radio, fiber optics, test equipment, and wideband military and space applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Distributed Power Amplifier MMIC from 0.01 to 10 GHz | |
RF Amplifier
from Mini Circuits
|
| The PMA5-83-2W+ from Mini-Circuits is a Distributed Power Amplifier MMIC that operates from 0.01 to 10 GHz. It delivers a saturated output power of 2 W with a gain of 12 dB and has a noise figure of 3.5 dB. This amplifier has low 2nd and 3rd harmonic response to ensure very low in-band distortion products, which is typically needed for high-fidelity measurement systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15.7 GHz Ku-Band Low-Phase Noise, Phase-Locked DRO | |
PLDRO
from Nanowave Technologies
|
| The NWO1570-12-02 from NANOWAVE Technologies is a 15.7 GHz Ku-Band Phase-Locked DRO Source. It has a phase noise of -150 dBc/Hz (at 1 MHz offset) and -170 dBc/Hz (at 10 MHz). This DRO source uses Nanowave’s proprietary HMIC process that uses chip and wire integration for lower insertion loss and improved heat dissipation necessary to achieve ultra-low phase noise over operational temperature ranges from 25°C to 70°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra-Low Noise Amplifier from 1 to 6 GHz for Space Applications | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA002093SEP from Teledyne e2v HiRel Electronics is a low noise amplifier developed for high-reliability space and radar applications. The LNA operates from 1 to 6 GHz and provides 21 dB of gain with a noise figure 0.37 dB and has a P1dB of 19 dBm. The device utilizes application-specific biasing and can be biased over a VDD range of 2.7 to 5.0 volts and an IDDQ range of 30 mA to 100 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W Space-Qualified Hybrid Coupler from 71 to 76 GHz | |
Waveguide Coupler
from Smiths Interconnect
|
| The 26WC404 from Smiths Interconnect is a Space-Qualified Hybrid Coupler that operates from 71 to 76 GHz. It can handle a CW input power of up to 100 W (1 W load fitted). This 2 x 1 hybrid coupler has an insertion loss of less than 0.4 dB and provides an isolation of more than 23 dB. It is designed for space and terrestrial environments and is qualified for environmental stress screening capability including mechanical shock, sine/random vibration, and humidity testing. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2-Port Vector Network Analyzers from 10 MHz to 20 GHz | |
Vector Network Analyzer
from Micran
|
| The R4M Series from Micran are Vector Network Analyzers (VNAs) with a frequency range from 10 MHz to 20 GHz. They have a dynamic range of 100 dB and are used to measure the S-parameters of linear 1-port and 2-port devices and various characteristics of electric circuits. These analyzers are useful for analyzing, tuning, testing, monitoring, and manufacturing of high-frequency and microwave devices used in radio electronics, communications, radars, and measurement equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular Signalling Test Solution for 5G FR1 and FR2 | |
RF Test Set
from LitePoint
|
| The IQcell-5G from LitePoint is a 5G FR1/FR2 Signalling Test Solution that is designed for end-of-line manufacturing, software regression and functional performance testing. It validates RF parametric measurements, end-to-end throughput, MIMO, mobility, and user experience testing across cellular and cellular-capable connectivity devices such as smartphones, CPE’s, laptops, tablets, hotspots, etc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 125 W, Rackmount GaN Power Amplifier from 0.6 to 6 GHz | |
RF Amplifier
from Vectawave Technology
|
| The VBA0660-125 from Vectawave is a High-Power Amplifier that operates from 0.6 to 6 GHz. It delivers an output power of 125 W with a gain of over 51 dB. This amplifier is based on high-performance GaN output stages and utilizes Vectawave proprietary quadrature hybrid combining techniques, minimizing loss for a more efficient solution. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 GHz High-Resolution SiGe BiCMOS FMCW Radar Sensor | |
Radar Sensor
from Infineon Technologies
|
| The BGT60UTR11AIP from Infineon Technologies is a 60 GHz Radar Sensor with a bandwidth of 5.6 GHz. This Antenna-in-Package (AIP) radar sensor with ±60° Field of View (FoV) has an analog-to-digital converter (ADC) with a sampling rate of 4 Mbps. It is based on Infineon's B11 SiGe BiCMOS technology and has a ramp speed of up to 400 MHz/µs that allows FMCW operations with extremely high resolution. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 Gbps 5G mmWave Antenna Module for Global Bands | |
Front End Module
from Qualcomm
|
| The QTM565 from Qualcomm is a 5G mmWave Antenna Module that supports global frequency bands: 24-29.5 GHz and 37-43.5 GHz. It delivers peak download speeds of up to 10 Gbps and has a bandwidth of up to 1000 MHz. This module is based on Qualcomm’s 5G modem-RF systems (Snapdragon X75, Snapdragon X72) and supports the 1st converged 5G sub-6 GHz and mmWave architecture, Qualcomm 5G PowerSave Gen 4 and Qualcomm SmartTransmit Gen 4 technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67 Rated Omni-Antenna for 5G, 4X4 MIMO cellular, 2X2 MIMO Wi-Fi | |
Antenna
from Parsec Technologies, Inc.
|
| The Irish Setter Pro Series are 5G, 4X4 MIMO cellular, 2X2 MIMO Wi-Fi, omnidirectional antenna with optional GPS and Bluetooth. These IP67 rated, linearly/RHCP polarized antennas operate from 600 Mhz to 6 GHz with a peak gain of 9 dBi. They have an omnidirectional radiation pattern with a radiation efficiency of up to 85%. These antennas are designed to operate dual SIMs across two antennas in a 4X4 configuration and use Parsec’s patent-pending technology that allows uniform antenna patterns to send all bands in the same direction, producing the highest performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Battery-Powered Class A/B Bidirectional Amplifier from 768 to 869 MHz | |
RF Amplifier
from Westell Technologies
|
| The CS40-734834-CAN from Westell Technologies is a Bidirectional Amplifier (BDA) that operates from 798 – 824 MHz (uplink) and 768-776 MHz/851-869 MHz (downlink). It delivers an output power of 2.5 W (~34 dBm) with a gain of 75 dB and has a noise figure of less than 7 dB. This amplifier represents the next revolution in public safety DAS designs, offering the most flexible platform available on the market. |
| |
Download Datasheet
Product Details | |
|
