| New RF and Microwave Products this Week . |
|
|
| 20 W GaN Power Amplifier from 8.2 to 11.8 GHz | |
RF Amplifier
from Analog Devices
|
| The ADPA1122 from Analog Devices is a Power Amplifier that operates from 8.2 to 11.8 GHz. It delivers an output power of 20 W with a small signal gain of 31 dB and a power-added efficiency (PAE) of 46%. This GaN amplifier has an integrated temperature-compensated RF power detector and is optimized for pulsed applications like military, marine, and weather radars. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W S-Band Power Amplifier from 2 to 4 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0200-0400-43 from ERZIA is a Power Amplifier that operates from 2 to 4 GHz. It delivers a saturated output power of 20 W (~43 dBm) with a small signal gain of 43 dB and a gain flatness of ±1 dB. This amplifier has an ON/OFF time of 150/350 ns and a VSWR of less than 1.8:1. It requires a DC supply of 28 V and is ideal for industrial, laboratory, SATCOM, telecom, space, aerospace, and military applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 dB Driver Amplifier from 5 to 22 GHz | |
RF Amplifier
from ATEK MIDAS
|
| The ATEK564AN3 from ATEK MIDAS is a wideband driver amplifier that operates from 5 to 22 GHz (can be stretched to 4-24 GHz as well). It provides a flat gain of 20.7 to 25.8 dB across the band and has a P1dB of 21.5 dBm. The amplifier is available in a compact 3×3 mm low-cost SMD package with input and output matched to 50 ohms internally. It requires a single positive supply voltage of 3 to 5 V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4 W GaN on SiC RF Power Transistor from 2 to 12 GHz | |
RF Transistor
from United Monolithic Semiconductors
|
| The CHK5010-99F from United Monolithic Semiconductors (UMS) is an RF Power Transistor that operates from 2 to 12 GHz. It delivers a saturated output power of 4 W (~36 dBm) with a small signal gain of 21.6 dB and a power-added efficiency of 72%. This transistor supports both CW and pulsed operating modes. It is manufactured using GaN HEMT technology on a SiC substrate and requires a DC supply of 30 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50/75-Ohm Variable Positive Slope Equalizers from 850 to 3150 MHz | |
Gain Equalizer
from ETL Systems
|
| The VEQUS6P-457013 Series from ETL Systems are Variable Positive Slope Equalizers that operate in the S-band from 850 to 3150 MHz. They have a slope range from 0 to 10 dB and an insertion loss of less than 11 dB. These slope equalizers enable slope control by setting DC voltage between 0 and 5 V via a feedthrough pin. They are available in a module that measures 83.11 x 32.54 x 16.00 mm with 50-ohm (SMA/N-type/BNC) or 75-ohm (BNC/F-type) connectors. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Scientific Microwave Corporation | | WR62 High-Power Ku-Band Circulator | | The WR62 Circulator from SMC is an indispensable three-port RF device engineered for precise control over the direction of RF signal flow making it versatile choice for applications requiring both high-power and stringent isolation between ports. Click here to learn more. | | | |
|
|
| Dual-Channel Direction Finding and Spectrum Monitoring System from 9 kHz to 18 GHz | |
Direction Finding System
from CRFS
|
| The RFeye Array 300 Series from CRFS is an intermediate-sized spectrum monitoring and direction-finding system for vehicle-mounted deployment or fixed installations. The Array 300 uses a unique multi-layer approach that is more sophisticated and versatile than traditional direction finding. High-performance spiral directional antenna modules are optimized for different frequency bands and arranged in multiple orientations. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Compact USB VNA from 9 kHz to 8.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5085 is a 2-Port Vector Network Analyzer from Copper Mountain Technologies that operates from 9 KHz to 8.5 GHz. It can measure all four S parameters and provides a wide variety of analysis capabilities, including time-domain with gating and frequency offset modes. This lab grade VNA is available in a compact package and can be controlled with a Windows or Linux based PC, laptop, tablet, or x86 board computer connected to the measurement hardware via a USB interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way In-Phase Power Divider from 2 to 4 GHz | |
Power Divider
from MECA
|
| The P4S-3.100 from MECA is a 4-way Power Divider/Combiner that operates from 2 to 4 GHz. It can handle an input power of up to 20 W, provides 25 dB of isolation and has an insertion loss of less than 1 dB. This in-phase power divider has an amplitude balance of ±0.8 dB and a phase balance of ±7°. It is available in an aluminium module that measures 2 x 2 x 0.75 inches with SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W, Low-PIM RF Termination from 350 to 5925 MHz | |
Termination
from Microlab
|
| The TK-6100ME from Microlab is an RF Termination that operates from 350 to 5925 MHz. It can handle an average input power of 100 W and a peak input power of 5 kW. This 50-ohm termination has a PIM (2x20 W) of -161 dBc and a VSWR of less than 1.30:1. It is available in an IP67-rated module that measures 8.27 x 3.50 x 2.48 inches with 4.3-10 (Male) connector and is designed for 5G, C-band, and LAA applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Scientific Microwave Corporation | | High-Power Coaxial TEM Loop Coupler | | The TEM Coaxial Loop Coupler from SMC provides wideband performance from 2-8 GHz with excellent return loss beyond 17 dB, stable coupling and high directivity. The TEM loop coupler can handle 10 kW peak power covering the entire operating bandwidth. Click here for learn more. | | | |
|
|
| 70 W, Rackmount Class-A Solid-State Power Amplifier from 0.8 to 6 GHz | |
RF Amplifier
from Prana
|
| The SX 70/15 from Prana is a Solid-State Power Amplifier that operates from 0.8 to 6 GHz. This Class A amplifier delivers a typical CW output power of 70 W CW (0.8 – 3.2 GHz) and 15 W CW (3.2 – 6 GHz) with a gain of 47 dB. It provides linear output power with harmonics of less than -20 dBc. This amplifier is designed for minimal maintenance with a modular design and easy access to all parts with rapid diagnostics and minimal downtime. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4G-LTE/5G-NR Front-End Module for Automotive Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY5A3047 from Skyworks is a Front-End Module for 4G LTE and 5G NR applications. It consists of power amplifier (PA) blocks, low-noise amplifier (LNA) blocks, two Mobile Industry Processor Interface (MIPI) v3.0 standard digital control blocks and integrated duplexers. This module includes a multiple gain state average power tracking mode, integrated filters, antenna port and band select switches. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Compact Bluetooth v5.4 Low Energy Chipset | |
Wireless Chipset
from EM Microelectronic
|
| The EM9305 from EM Microelectronic is an Ultra-Low Power Bluetooth 5.4 Systems-on-Chip (SoC). It has a highly flexible architecture that allows this SoC to act as a companion IC to any ASIC or MCU-based product. This SOC features a state-of-the-art 2.4 GHz transceiver, a low-power receiver with excellent sensitivity/selectivity, and a programmable transmitter up to +10 dBm for optimized output power and current consumption. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Dual-Junction Cryogenic Isolator from 4 to 8 GHz | |
RF & Microwave Isolator
from Renaissance Electronics Corporation
|
| The 2SMD7BA from Renaissance Electronics Corporation is a Dual-Junction Cryogenic Isolator that operates in the C-Band from 4 to 8 GHz. It provides an isolation of 35 dB and has an insertion loss of 1 dB. This isolator can handle an input power of 1 W and has a VSWR of 1.25:1. It has been designed to work at mK temperatures and maintains a low insertion loss across the operating bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 GHz Low-Loss Armored Test Cables for EMC Measurements | |
RF Cable
from MegaPhase
|
| The EMC Lab Test Series from Megaphase are 40 GHz RF Cables for electromagnetic compatibility (EMC) testing. They are designed for EMC lab technicians and have a shielding effectiveness of 110 dB to ensure isolation against electromagnetic interference. These cables have low loss and ultra-rugged armored construction to endure intensive use without compromising performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fully-Integrated V2X SoC for Day 1 and Future Day 2 Applications | |
V2X Module
from Autotalks
|
| The TEKTON3 from Autotalks is a V2X SoC that is designed for Day 1 and future Day 2 use cases. It has embedded Day 1 and Day 2 radios operating concurrently with both radios using two antennas with full transmit and receive diversity. The Day 1 radio supports either LTE-V2X (C-V2X Rel. 14/15) or DSRC and the Day 2 radio supports either 5G-V2X (C-V2X Rel. 16/17/18) or DSRC+ (IEEE802.11bd). |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade One-Chip Radar SoCs for Collision Avoidance Applications | |
Automotive Radar Chipset
from NXP Semiconductors
|
| The SAF86xx from NXP Semiconductors are One-Chip RFCMOS Radar SoCs that support future distributed automotive radar architectures. They operate from 76 to 81 GHz and have a total bandwidth of 5 GHz. These SoCs consist of 4 transmitters, 4 receivers, ADC conversion, phase rotator, low phase noise VCO, BBE32EP DSP processor, ARM Cortex-M7 core, and SRAM memory to support various use cases in short-range, medium-range, and long-range automotive radar applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-mode, Dual-channel Automotive-Grade V2X Module | |
V2X Module
from Rolling Wireless
|
| The RX135x from Rolling Wireless is a Dual-mode, Dual-channel V2X Module supporting legacy (LTE-V2X/DSRC) and next-generation (NR-V2X/802.11bd) V2X technologies. It is based on Autotalks' third-generation SECTON3 chipset and is designed to support advanced V2X applications. This module can be connected either to a Rolling Wireless automotive-grade 5G module, using the NAD’s application processor, or to any external application processor to run the V2X stack and applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G-NR Digital Repeater with 20/100 MHz Bandwidth | |
RF Repeaters
from Advanced RF Technologies
|
| The SDRX-43-N77H from ADRF is a carrier-grade high-power 5G-NR Digital repeater for the upper C-Band spectrum. It is a cost-effective alternative to base stations, offering a quick and affordable means of delivering indoor and outdoor 5G coverage in metropolitan and rural areas. The SDRX-43-N77H can be individually wall-mounted or installed in an SDR-ICS chassis as a modular upgrade to existing infrastructure. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka/Ku-Band, Integrated and Portable SATCOM-on-the-Move Terminal | |
SATCOM Terminal
from Get SAT Ltd
|
| The MICRO SAT LW from Get SAT is a Portable On-the-move SATCOM Terminal that is suitable for use in unmanned aerial vehicles (UAVs). It operates in the Ku-band from 10.7 to 12.75 GHz (Rx)/12.75 to 14.5 GHz (Tx) or in the Ka-band from 17.5 to 21.2 GHz (Rx)/27.5 to 31 GHz (Tx). This terminal has an integrated modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end. |
| |
Download Datasheet
Product Details | |
|
