| New 5G Products . |
|
|
| Dual Channel IF Transceiver IC from 37 to 48.2 GHz | |
RF Transceiver
from Anokiwave
|
| The AWMF-0196 from Anokiwave is a Dual Channel IF Transceiver IC that operates from 37 to 48.2 GHz covering n260, n259, and n262 3GPP bands. It has integrated dual Tx single-sideband up-conversion, dual Rx image-reject down-conversion functionality, and an on-chip PLL/VCO LO synthesizer that enables 2T2R applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Band Cellular/4G Antenna from 698 to 2700 MHz | |
Antenna
from Antenna Company
|
| The AC97002-100 from Antenna Company is a Multi-Band Cellular/4G Antenna that operates from 698 to 960 MHz and 1700 to 2700 MHz. This omnidirectional antenna has an efficiency of 70%. It has been designed to minimize installation time, eliminate the need to investigate multiple mounting locations during installation and improve the success rate of mounting inside metal cabinets. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4G-LTE/5G-NR Front-End Module for Automotive Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY5A3047 from Skyworks is a Front-End Module for 4G LTE and 5G NR applications. It consists of power amplifier (PA) blocks, low-noise amplifier (LNA) blocks, two Mobile Industry Processor Interface (MIPI) v3.0 standard digital control blocks and integrated duplexers. This module includes a multiple gain state average power tracking mode, integrated filters, antenna port and band select switches. |
| |
Download Datasheet
Product Details | |
|
|
|
| Differential-to-Single-Ended RF Amplifier from 4.4 to 5 GHz | |
RF Amplifier
from iCana
|
| The ICASD4450-D2S from iCana is a Differential-to-Single-Ended Gain Amplifier that operates from 4.4 to 5.0 GHz. It provides a gain of 16.5 dB with a noise figure of 3.6 dB and has an output P1dB of 17 dBm. This amplifier is manufactured using GaAs technology that exhibits low noise figures and high linearity, allowing it to be used in both receiver and transmitter applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fully-Integrated V2X SoC for Day 1 and Future Day 2 Applications | |
V2X Module
from Autotalks
|
| The TEKTON3 from Autotalks is a V2X SoC that is designed for Day 1 and future Day 2 use cases. It has embedded Day 1 and Day 2 radios operating concurrently with both radios using two antennas with full transmit and receive diversity. The Day 1 radio supports either LTE-V2X (C-V2X Rel. 14/15) or DSRC and the Day 2 radio supports either 5G-V2X (C-V2X Rel. 16/17/18) or DSRC+ (IEEE802.11bd). |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz Rel-17 Multi-band 5G NR/LTE-FDD/LTE-TDD Modules | |
Cellular Module
from SIMCom
|
| The SIM8230X from SIMCom are Sub-6 GHz Multi-Band 5G NR/LTE-FDD/LTE-TDD Modules. They have a 3GPP Rel-17 Compliant 5G Standalone architecture, with a downlink data rate of up to 220 Mbps and uplink data rate of up to 100 Mbps. These modules require a DC supply from 3.3 to 4.4 V. They are available in LGA + LCC packages that measure 30.0 x 30.0 x 2.5 mm and can be controlled via USB 2.0, PCM, I2C, PCIe and GPIO interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G-NR Bandpass Filter with Passband from 37 to 40 GHz | |
Band Pass Filter
from TMYTEK
|
| The FT-BPF-n260-C from TMYTEK is a Bandpass Filter with a passband from 37 to 40 GHz covering the 5G-NR n260 band. It has a passband insertion loss of 4 dB and provides 40 dB of rejection both above and below the passband. This filter is available in a RoHS-compliant package that measures 47.78 x 29.33 x 13.74 mm with 2.92 mm (female) connectors and is ideal for 5G communication, SATCOM, or radar applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W, Low-PIM RF Termination from 350 to 5925 MHz | |
Termination
from Microlab
|
| The TK-6100ME from Microlab is an RF Termination that operates from 350 to 5925 MHz. It can handle an average input power of 100 W and a peak input power of 5 kW. This 50-ohm termination has a PIM (2x20 W) of -161 dBc and a VSWR of less than 1.30:1. It is available in an IP67-rated module that measures 8.27 x 3.50 x 2.48 inches with 4.3-10 (Male) connector and is designed for 5G, C-band, and LAA applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| mm-Wave SPDT Switch from 37 to 49 GHz for 5G Applications | |
RF Switch
from Analog Devices
|
| The ADRF5301 from Analog Devices is a Silicon-Based SPDT Switch that operates from 37 to 49 GHz. It can handle an input power of up to 28 dBm, has an insertion loss of 1.4 dB, and provides an isolation of 30 dB. This switch exhibits high input linearity and is manufactured using a silicon process. It integrates a driver to perform logic functions internally and to provide users with the advantage of a simplified CMOS-/TTL control interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Radio Communication Test Station for 5G Test Requirements | |
Channel Emulator
from Anritsu
|
| The MT8000A from Anritsu is a Radio Communication Test Station for developing 5G communications terminals, chipsets and devices. This all-in-one desktop tester supports RF and protocol tests for the sub-6 GHz, including band n41 and millimeter wave bands. Combining it with the OTA Chamber enables both millimeter wave band RF measurements and beamforming tests using call connections specified by 3GPP. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4/7.5/13.6/30/44 GHz Signal and Spectrum Analyzers for 5G-NR Device Testing | |
RF Spectrum Analyzer
from Rohde & Schwarz
|
| The FSVA3000 from Rohde & Schwarz are Signal and Spectrum Analyzers that operate from 2 Hz to 4/7.5/13.6/30/44 GHz. They are designed to perform demanding signal analysis tasks and can help users set up complex measurements in the simplest and fastest way possible. These spectrum analyzers have an analysis bandwidth of up to 1 GHz and an SSB phase noise of –127 dBc/Hz @ 10 kHz offset. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4x24 Switch Matrix Series from 9 kHz to 26.5 GHz for 5G Testing | |
Switch Matrix
from SIGLENT
|
| The SSM5000A Series from Siglent are Switch Matrices that operate from 9 kHz to 26.5 GHz. They can be configured to have up to 4 input ports with up to 24 output ports and an isolation of more than 65 dB. These switch matrices can handle an input power of 20 dBm and have a switching time of 10 µs. They can expand the number of test ports of a network analyzer, signal source, spectrum analyzer, or other equipment. |
| |
Download Datasheet
Product Details | |
|
|
|
| Receiver Module from 32 to 38 GHz for Radar and 5G Applications | |
Receiver
from ERAVANT
|
| The SSR-3530633012-28-SE1 from ERAVANT is a Receiver Module that converts input frequencies (RF) from 32 – 38 GHz to output frequencies (IF) from DC – 18 GHz. It has a conversion gain of 12 dB with a noise figure of 3 dB. The receiver exhibits good gain flatness and includes a built-in x4 LO multiplier. It requires a DC supply of 8 V and consumes 300 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G-NR Digital Repeater with 20/100 MHz Bandwidth | |
RF Repeaters
from Advanced RF Technologies
|
| The SDRX-43-N77H from ADRF is a carrier-grade high-power 5G-NR Digital repeater for the upper C-Band spectrum. It is a cost-effective alternative to base stations, offering a quick and affordable means of delivering indoor and outdoor 5G coverage in metropolitan and rural areas. The SDRX-43-N77H can be individually wall-mounted or installed in an SDR-ICS chassis as a modular upgrade to existing infrastructure. |
| |
Download Datasheet
Product Details | |
|
|
|
| Outdoor Multi-Gigabit Radio from 71-76/81-86 GHz | |
Microwave Backhaul Radio Links
from Intracom Telecom
|
| The UltraLink-GX80 from Intracom Telecom is a compact all-outdoor Ethernet/CPRI Radio that operates from 71-76 GHz and 81-86 GHz. With a high system gain, it achieves a throughput of up to 10 Gbps (full duplex) which makes the radio suited for use in demanding applications requiring ultra-high capacity. It has channel sizes of 125/250/500/750/1,000/1,500/2,000 MHz. |
| |
Download Datasheet
Product Details | |
|
