| Featured Products this Week . |
|
|
|
|
|
|
|
| 100 W, Rugged CW/Pulsed GaN Solid-State Amplifier from 2 to 6 GHz | |
RF Amplifier
from RFTR Electronics
|
| The JA20006000P50 from RFTR Electronics is a Solid-State Amplifier Module that operates from 2 to 6 GHz. It delivers an output power of 100 W with a gain of 60 dB. This Class AB amplifier utilizes GaN-on-SiC transistors and is suitable for CW and pulsed waveforms. With a fast switching time of less than 4 µs (ON/OFF), this amplifier ensures power saving during pulsed applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Successive Detector Log Video Amplifier from 120 to 200 MHz | |
DLVA
from Quantic PMI (Planar Monolithics)
|
| The SDLVA-160-80 from Quantic PMI is a Successive Detector Log Video Amplifier (SDLVA) that operates from 120 to 200 MHz. This SDLVA has a log slope of 25 mV/dB, a log linearity of ±1.0 dB, and a dynamic range from -80 dBm to 0 dBm. It has a rise time of 30 ns and a fall time of 60 ns. This amplifier has been designed using cutting-edge GaAs technology, which offers excellent performance and reliability in a compact package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Way Power Divider/Combiner from 0.5 to 8.0 GHz | |
Power Divider
from MECA
|
| The 808-2-4.250 from MECA is an 8-Way Power Divider/Combiner that operates from 0.5 to 8.0 GHz. It has an insertion loss of less than 4.8 dB with an isolation of over 20 dB. The power divider can handle an input power of up to 30 W and has a VSWR of 1.6:1. It has an amplitude balance of less than 1 dB and a phase balance of under 15°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Square Air Core Inductors from 47 to 500 nH | |
RF Inductor
from Coilcraft
|
| The 2929SQ Series from Coilcraft are Square Air Core Inductors with inductance values from 47 to 500 nH. They do not use a magnetic core which enables high Q and the low losses for high-frequency applications. These inductors have a Q factor of up to 230 at 400 MHz and can handle current up to 5.7 A. They have flat top and bottom for reliable pick and place and mechanical stability and solder coated leads for excellent solderability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1:16 Surface-Mount Transformer from 5 to 40 MHz | |
Balun
from MiniRF
|
| The RFXF0573 from MiniRF is an RF Transformer that operates from 5 to 40 MHz. It has an impedance ratio of 1:16 and an insertion loss of less than 0.7 dB. This 50-ohm transformer has a phase balance of less than ±3° and an amplitude balance of ±0.3 dB. It can handle up to 2 W of RF input power and has low distortion/temperature variation. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Quantic Wenzel | | |
|
|
| Nickel-Silver Board Level EMI/RFI Shielding Cans | |
Board Level EMI/RFI Shielding Can
from Harwin
|
| The S03-R Series from Harwin are Board Level EMI/RFI Shielding Cans. They are unplated cans and have a Nickel-Silver base material contact. These shielding cans are easy to use and rework and require no additional soldering. They are available in customizable dimensions in a packaged tape and reel format for automated placement. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 W CW/Pulsed Solid State Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2026B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2 to 6 GHz in CW or Pulse modes. It delivers an output power of more than 500 W with a gain of over 57 dB. The amplifier has a class A/AB linear design and built-in protection circuits with extensive monitoring features. The high level of performance and excellent power/gain flatness properties make this amplifier ideal to replace TWT Technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| Test & Measurement Instrument Amplifier from 50 to 67 GHz | |
RF Amplifier
from Maury Microwave
|
| The MPA-50G-67G-5 from Maury Microwave is a Benchtop/Rack Mount Amplifier that operates from 50 to 67 GHz. It has been developed for Test & Measurement applications. This amplifier has been evaluated for Burn-in and aging tests that include prolonged storage under extreme temperature conditions, extended amplifier operation over the entire rated temperature range, and elongated usage at maximum power under CW and pulsed-CW conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaN on SiC Power Amplifier from 700 to 2500 MHz | |
RF Amplifier
from RFHIC
|
| The RWP15080-10 from RFHIC is a GaN on SiC Power Amplifier that operates from 700 to 2500 MHz. It delivers an output power of 100 W (50 dBm) with a gain of 53 dB and a power-added efficiency of up to 48.31%. This amplifier has an input return loss of 9 dB and harmonics of less than -62.21 dBc (2nd harmonics) & -69.88 dBm (3rd harmonics). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W, GaN Power Amplifier MMIC from 16.5 to 21.5 GHz | |
RF Amplifier
from AmpliTech
|
| The AGMPA165215 from AmpliTech is a GaN HEMT Power Amplifier MMIC that operates from 16.5 to 21.5 GHz. It provides 20 dB of gain with a saturated output power of 35 dBm (~3.16 W) and has a PAE of 30 %. This GaN on SiC power amplifier requires a DC supply of +28 V and consumes 100 mA of current. It is available as a 50-ohm internally matched die that measures 2.4 x 1.8 x 0.1 mm. |
| |
Product Details | |
|
|
|
| Tunable Bandpass Filter MMIC with Passband from 3 to 10 GHz | |
Tunable Filter
from Marki Microwave
|
| The MFBT-00001PSM from Marki Microwave is a Tunable Bandpass Filter MMIC with a passband from 3 to 10 GHz. It has a passband insertion loss of 6.5 dB and provides an out-of-band rejection of 35 dB (low and high band). This GaAs MMIC filter has separate low pass and high pass tuning capabilities, allowing users to create bandpass filter designs with variable center frequencies and bandwidths. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4/5/6 GHz Wi-Fi 7 + Bluetooth 5.4 Combo SoC for Mobile Handsets | |
Wireless Chipset
from Broadcom
|
| The BCM4390 from Broadcom is a 2.4/5/6 GHz Wi-Fi 7 + Bluetooth 5.4 Combo SoC that has been optimized for mobile handset applications where high performance, low latency, low power consumption, and small solution size are the key requirements. This SoC includes a dual-band 2x2 IEEE 802.11be-compliant radio, a dual-core Bluetooth 5.4 radio, a dedicated scan core, and serial interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| MEMS-Based SP4T Switch from DC to 8 GHz | |
RF Switch
from Menlo Micro
|
| The MM5140 from Menlo Micro is a MEMS SP4T Switch that operates from DC to 8 GHz. It can handle a CW input power of 25 W and a peak input power of 150 W. The switch has a turn-on time of 8.5 µs and a turn-off time of 2.5 µs. It has an insertion loss of 0.4 dB and provides isolation of more than 26 dB. This switch is built on Menlo Micro's Ideal Switch technology and utilizes an integrated charge pump/driver circuit. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP Data Links from 4.4 to 5 GHz for Hypersonic Airborne Applications | |
Data Link
from BERTEN
|
| The P4700 Series from BERTEN are Airborne-Qualified IP Data Links that operate in the NATO Band IV from 4400 to 5000 MHz. They have been designed to provide a compact, robust, and affordable solution for tactical communications in electronic warfare (EW) environments. These transceivers implement unique frequency offset compensation algorithms that keep communication performance at hypersonic speeds of up to Mach 5 (more than 6000 km/h). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 10 GHz Surface-Mount Dielectric Resonator Oscillator | |
DRO
from Synergy Microwave Corporation
|
| The GSDRO1000-8XT from Synergy Microwave Corporation is a Dielectric Resonator Oscillator that operates at 10 GHz. It provides an output power of more than 3 dBm with a phase noise of -168 dBc/Hz (@10 MHz offset) and provides a harmonics suppression of 28 dBc. This oscillator has a tuning voltage range (DC) from 1 to 15 V and a tuning sensitivity of 0.35 MHz/V. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Basic Spectrum Analyzer from 9 kHz to 4 GHz for Essential RF Applications | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The N9321C from Keysight is a Basic Spectrum Analyzer (BSA) that operates from 9 kHz to 4 GHz. It has an analysis bandwidth of up to 1 MHz, a phase noise of -90 dBc/Hz (@10 kHz offset), and a DANL of -152 dBm (@1 GHz). This BSA is built to address essential applications and offers proven test efficiency, best-in-class usability, and flexibility to adapt to new requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Spectrum Analyzer from 9 kHz to 54 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Field Master Pro MS2090A from Anritsu is a RF handheld spectrum analyzer that operates up to 54 GHz and has a real-time spectrum analysis bandwidth of up to 100 MHz. It has a Displayed Average Noise Level (DANL) of less than -160 dBm and Third Order Intercept (TOI) of +20 dBm, for more accurate spectrum clearing, radio alignment, and harmonic and distortion measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 20 W, Waveguide Isolator from 17.3 to 21.2 GHz for LEO/GEO Applications | |
Waveguide Isolator
from Smiths Interconnect
|
| The 19HD358 from Smiths Interconnect is a Space-qualified Isolator that operates from 17.3 to 21.2 GHz. It can handle a CW input power of 20 W, provides more than 21 dB of isolation, and has an insertion loss of less than 0.2 dB. This isolator has completed qualification for spacecraft using Smith Interconnect’s comprehensive in-house test facilities that comprise sine and random vibration, mechanical shock and RF power TVAC, average power and multipaction, and critical power testing. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.5 Gbps 4x4 MIMO Point-to-Point/Point-to-Multipoint Radio from 5.15 to 5.85 GHz | |
Microwave Backhaul Radio Links
from Proxim
|
| The Stratum X5 from Proxim is a Point-to-Point/Point-to-Multipoint (PtP/PtMP) Radio that operates from 5.15 to 5.85 GHz. It supports channel sizes of 20 MHz, 40 MHz, and 80 MHz (80 +80 MHz, and 160 MHz via future upgrades), 2x2, and 4x4 MIMO and delivers a data rate of more than 1.5 Gbps. This radio utilizes a BPSK/1024-QAM and OFDM modulation scheme with maximum throughput and uses antenna diversity to improve radio stability in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 W IP64-Rated Triplexer from DC to 960 MHz | |
Triplexer
from Amphenol Procom
|
| The PRO-TRI-174/380-520/760-960 from Amphenol Procom is a Triplexer that operates from DC to 174 MHz, 380 to 520 MHz, and 760 to 960 MHz. It has been designed to split or combine signals in all three operating frequency ranges. This triplexer can handle an input power of up to 150 W (high-power version), provides an isolation of more than 50 dB, and has an insertion loss of less than 0.7 dB. |
| |
Download Datasheet
Product Details | |
|
