| New RF and Microwave Products this Week . |
|
|
| Low Noise Amplifier from 0.4 to 3 GHz for Space and Military Applications | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA0430 from Teledyne e2v HiRel Electronics is a Low Noise Amplifier that operates from 0.4 to 3 GHz. It provides a small signal gain of 21.5 with a noise figure of 0.35 dB and has a P1dB of 18.5 dBm. This LNA utilizes application-specific biasing and can be biased over an operating voltage of 5 V. It can be used as the first-stage LNA for advanced satellite or military communication receivers or radar systems applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 W GaN Monolithic Power Amplifier from 35 to 42.5 GHz | |
RF Amplifier
from United Monolithic Semiconductors
|
| The CHA6095-QKB from United Monolithic Semiconductors (UMS) is a GaN Monolithic Power Amplifier that operates from 35 to 42.5 GHz. It delivers a saturated output power of 4 W (~36 dBm) with a linear gain of 25 dB and a power-added efficiency of 12%. This amplifier requires a DC supply of 25 V and consumes 300 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Bit Silicon Digital Attenuator from 100 MHz to 30 GHz | |
RF Variable Attenuator
from Analog Devices
|
| The ADRF5716 from Analog Devices is a 2-bit Silicon Digital Attenuator that operates from 100 MHz to 30 GHz. It has an attenuation range of 48 dB with a step size of 16 dB and an attenuation accuracy of ±0.50 dB. This attenuator can handle an input power of up to 33 dBm and has an insertion loss of less than 2.9 dB. It has a rise/fall time switching of 20 ns and an on-time/off-time switching of 50 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Reliability, Air Core Power Inductors 22 to 117 nH | |
RF Inductor
from Coilcraft
|
| The 1212VS Series from Coilcraft are High Reliability Power Inductors with inductance values from 22 to 117 nH. These air core inductors can handle up to 57 A of current with no core loss and have Q factors up to 200 (400 MHz). They are available in packages that measure 12.00 x 11.50 x 11.30 mm with RoHS-compliant tin-silver over copper terminations. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4 GHz SOI Front-End Module for IoT Applications | |
Front End Module
from pSemi, A Murata Company
|
| The PE562212 from pSemi is a 2.4 GHz SOI Front-End Module for Thread/Zigbee®/Bluetooth®/ Wi-Fi® IoT applications. It has an integrated power amplifier with an output power of up to 21 dBm and an integrated low-noise amplifier (LNA) with a noise figure of 1.5 dB along with a low-loss bypass path. This FEM is manufactured on pSemi’s UltraCMOS silicon-on-insulator (SOI) process and has a compact monolithic IC design, making it suitable for use in PCBs with limited space. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Mouser | | THVD4431EVM Evaluation Module | | Texas Instruments THVD4431EVM Evaluation Module is designed to demonstrate the THVD4431 RS-485/RS-232 multiprotocol transceiver that supports full and half duplex RS-485 and 3T5R RS-232 configurations and employs loopback modes for RS-232 and RS-485 to enable on-chip diagnostic testing. Click here to learn more. | | | |
|
|
| Distributed Amplifier MMIC from DC to 70 GHz | |
RF Amplifier
from Marki Microwave
|
| The AMM-9024CH from Marki Microwave is a Distributed Amplifier MMIC that operates from DC to 70 GHz. It delivers a saturated output power of up to 14 dBm with a small signal gain of 11.5 dB and a noise figure of less than 4 dB. The amplifier provides reverse isolation of 40 dB and has a return loss of 20 dB (input/output). |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Cryogenic Amplifier from 4 to 8 GHz | |
RF Amplifier
from AmpliTech
|
| The APTC3-04000800-1K00-D4-V from Amplitech is a Low Noise Cryogenic Amplifier that operates from 4 to 8 GHz. It provides a gain of more than 40 dB with a noise figure of 0.35 dB and has a P1dB of -6 dBm. The amplifier requires a DC supply of 0.7 V and draws 20 mA of current (typical) while consuming 2.5 mW of power at 4°Kelvin. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic Termination from 4 to 12 GHz | |
Termination
from Low Noise Factory
|
| The LNF_TERM4_12A from Low Noise Factory is a Cryogenic Termination that operates from 4 to 12 GHz. This termination can be used to convert a Low Noise Figure circulator into an isolator with a DC feed through. The DC voltage will be present at both the input and output of the isolator. It can handle up to 30 dBm of power and has a return loss of 22 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 W Solid State Low Noise Power Amplifier from 41 to 47 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The MPA3021 from Exodus Advanced Communications is a GaAs FET Hybrid Solid State Low Noise Power Amplifier that operates from 41 to 47 GHz. This class AB linear amplifier delivers over 2 W of saturated output power (P1dB of 1 W) with a gain of more than 33 dB. It has spurious of up to -60 dBc, and harmonics of up to -20 dBc. The amplifier has built-in protection circuits and requires external heat sink for cooling. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Tabletop RF Amplifier from 10 MHz to 18 GHz | |
RF Amplifier
from Becker Nachrichtentechnik GmbH
|
| The AMP20280035B-T from Becker RF is a Power Amplifier that operates from 20 to 2800 MHz. It delivers an output power of 4.5 W with a gain of up to 41 dB and provides a reverse isolation of 70 dB. This power amplifier has an integrated highpass filter (HPF) in the input to suppress unwanted signals in the VLF and HF range. The amplifier has robust electric and mechanical design to ensure operations over a long time and the enclosure provides excellent shielding to avoid EMI influences caused by environmental radio signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Bandpass Filter with Passband from 32.0 to 36.2 GHz | |
Band Pass Filter
from COM-MW
|
| The STBP341-4R2-M422 from COM-MW is a Bandpass Filter with a passband from 32 to 36.2 GHz (center frequency 34.1 GHz). It has a passband insertion loss of 2.6 dB and provides over 40 dBc of attenuation above and below the passband. This filter can handle a CW input power of 2 W and has a VSWR of 1.7:1. It is available in a ceramic substrate package that measures 9.0 x 2.5 x 0.26 mm with gold wire bonding. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10-bit, Programmable PIN Diode Attenuator from 400 MHz to 18 GHz | |
RF Variable Attenuator
from Quantic PMI (Planar Monolithics)
|
| The DTA-0R4G18G-60-CD-1 from Quantic PMI (Planar Monolithics) is a 10-bit Non-Reflective Programmable PIN Diode Attenuator that operates from 0.4 to 18 GHz. It provides an attenuation range of 60 dB (in 0.06 dB steps) with an attenuation accuracy of ±1.0 dB and has a switching speed of 1.0 µs/0.5 µs (ON/OFF time). This attenuator can handle an input power of 15 dBm and has an insertion loss of less than 4.8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 dB Driver Amplifier from 5 to 22 GHz | |
RF Amplifier
from ATEK MIDAS
|
| The ATEK564AN3 from ATEK MIDAS is a wideband driver amplifier that operates from 5 to 22 GHz (can be stretched to 4-24 GHz as well). It provides a flat gain of 20.7 to 25.8 dB across the band and has a P1dB of 21.5 dBm. It requires a single positive supply voltage of 3 to 5 V. The amplifier is available in a compact 3×3 mm low cost SMD package with input and output matched to 50 ohms internally. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.92 mm VNA Calibration Kit | |
VNA Calibration Kit
from Maury Microwave
|
| The 8770CK50 from Maury Microwave is a 2.92 mm VNA Calibration Kit that is ideal for Characterized Device (CD) fixed load SOLT (Short, Open, Load and Thru) calibration in 0.05 to 40 GHz frequency range. It can be used for performing one-port SOL (Short-Open-Load) response calibrations (a method used for measuring VSWR/ReturnLoss), and full two-port SOLT (Short-Open-Load-Thru) calibration (for performing forward and reverse transmission and reflections measurement). |
| |
Download Datasheet
Product Details | |
|
|
|
| Programmable AWGN Noise Generators from 10 MHz to 3 GHz | |
Noise Generator
from Boonton
|
| The NGX1000 Series from Boonton are Programmable Noise Generators that operate from 10 MHz to 3 GHz. They generate additive white gaussian noise (AWGN) with an output power of 0/+10 dBm and have a noise attenuation range from 0 to 127 dB in 0.1 dB steps. These noise generators can be controlled manually via a 5-inch touchscreen display or remotely via Ethernet. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W GaN-on-SiC Power Amplifier from 0.5 to 2.5 GHz | |
RF Amplifier
from RFHIC
|
| The RWP15040-1H from RFHIC is a Power Amplifier that operates from 500 to 2500 MHz. It delivers an output power of 50 W (~47 dBm) with more than 36 dB of gain and an ON/OFF switching time of less than 5 µs. This amplifier is manufactured using GaN-on-SiC technology and is attached on an Aluminum sub-carrier material. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Block Downconverters from 38 to 40 GHz | |
Low Noise Block
from ACORDE
|
| The ACLNBD-Q Dual-Band Series from ACORDE are Low Noise Block (LNB) Downconverters that convert input frequencies from 38-40 GHz to output frequencies from 950-1950 MHz. They provide a gain of more than 60 dB with a noise figure of less than 2.8 dB and have a phase noise of -80 dBc/Hz (at 10 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| SPDT Switch from 2.4 to 8.3 GHz | |
RF Switch
from Skyworks Solutions
|
| The SKY59608-711LF from Skyworks Solutions is an SPDT Switch that operates from 2.4 to 8.3 GHz. This switch has an insertion loss of less than 0.8 dB and provides up to 28 dB of isolation. It has a switching speed of 200 ns, a turn-on time of 10 µs, an input return loss of 14 dB, and an output return loss of 16 dB. This switch has harmonics of -54 dBm and an error vector magnitude (EVM) of -44 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 10-meter Rugged and Slim RFID Reader with Integrated Antenna | |
RFID Antenna
from FlexiRay
|
| The FlexiRay SFX is an RFID Reader with an integrated antenna. This IP65-rated reader has a slim and rugged design that enables the creation of RFID reading zones in entrances, exits, corridors, doors and gates. It operates at a frequency range from 865.6 to 867.6 MHz, has a reading speed of up to 750 tags/second and complies with the EPCGlobal Class 1 Gen2, 18000-6C protocol. |
| |
Download Datasheet
Product Details | |
|
|
|
| Long-Range LoRa Module from 470 – 510 MHz/862 – 928 MHz | |
RF Module
from Quectel
|
| The KG200Z from Quectel is a LoRa Module that operates in the LoRa frequency bands from 470 to 510 MHz and 862 to 928 MHz. It has a receiver sensitivity of -138 dBm with a range of 2–5 km in towns and 10–15 km in suburbs. This module supports LoRa, (G)FSK, (G)MSK and BPSK modulations along with LoRaWAN standard protocol and has incorporated AES hardware encryption for enhanced security. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, Ethernet-Powered Beam Steering Outdoor Radio from 4.4 to 5.875 GHz | |
Microwave Backhaul Radio Links
from Cambium Networks
|
| The PTP 45700 from Cambium Networks is a Beam Steering Outdoor Radio Unit (ODU) that operates from 4.4 to 5.875 GHz. It has an integrated smart antenna that provides electronic beamforming and allows for easy tactical installation and excellent interference mitigation. This antenna has an azimuth range of 120° and an elevation range of 30° for point-to-point links and enables quick, tactical installation by pointing in the general direction of the desired radio. |
| |
Download Datasheet
Product Details | |
|
