| Interesting Products at MWC 2024 . |
|
|
| 7 GHz Wireless Connectivity Test Set for Wi-Fi 7 and Cellular 5G Networks | |
RF Test Set
from Keysight Technologies
|
| The E7515W from Keysight Technologies is a UXM Wireless Connectivity Test Platform. It has been designed to support Wi-Fi-to-Cellular internetworking testing of both Wi-Fi clients (STAs) and access points (APs) from 380 MHz to 7.125 GHz (frequency resolution of 1 Hz). This test platform adds support for Wi-Fi 7 testing and enables advanced Wi-Fi/cellular co-existence testing and unique testing of 5G fixed wireless access (FWA) devices. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 8 GHz Radio Communication Test Platform for Wi-Fi/5G-NR | |
RF Test Set
from Rohde & Schwarz
|
| The R&S CMP180 from Rohde & Schwarz is a Radio Communication Test Platform that covers wireless standards including Wi-Fi 6E, Wi-Fi 7, and 5G NR at FR1 frequencies, along with a wide range of legacy technologies. It is designed to manage multiple parallel signals for multiple devices and MIMO transmission methods that provide maximum measurement speed at frequencies up to 8 GHz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Radio Communication Test Station for 5G Test Requirements | |
Channel Emulator
from Anritsu
|
| The MT8000A from Anritsu is a Radio Communication Test Station for developing 5G communications terminals, chipsets and devices. This all-in-one desktop tester supports RF and protocol tests for the sub-6 GHz, including band n41 and millimeter wave bands. Combining it with the OTA Chamber enables both millimeter wave band RF measurements and beamforming tests using call connections specified by 3GPP. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 5G NR Beamforming RFIC from 24.25 to 29.5 GHz | |
Beamforming IC
from Sivers Semiconductors
|
| The TRB02801 from Sivers Semiconductors is a 5G NR Beamforming RFIC that operates from 24.25 to 29.5 GHz. This RFIC has integrated T/R-switches, linear power, and low noise amplifier and features RF tiling of multiple transceivers for large array antenna configurations. It supports more than 256 QAM OFDM modulation with flexible channelization. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2.4 GHz SOI Front-End Module for IoT Applications | |
Front End Module
from pSemi, A Murata Company
|
| The PE562212 from pSemi is a 2.4 GHz SOI Front-End Module for Thread/Zigbee®/Bluetooth®/ Wi-Fi® IoT applications. It has an integrated power amplifier with an output power of up to 21 dBm and an integrated low-noise amplifier (LNA) with a noise figure of 1.5 dB along with a low-loss bypass path. This FEM is manufactured on pSemi’s UltraCMOS silicon-on-insulator (SOI) process and has a compact monolithic IC design, making it suitable for use in PCBs with limited space. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Module with LTE Cat 4 Fallback | |
Cellular Module
from Telit Communications
|
| The FE910C04 from Telit Cinterion is a 5G RedCap Module that is based on the 3GPP Release 17 RedCap technology. It also supports LTE Cat 4 fallback to enhance uplink performance and coverage. This module is powered by Telit Cinterion’s value-added services, encompassing NExT data plans, connectivity activation, AppZone processing, and OneEdge services. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Modules for IoT Applications | |
Cellular Module
from Quectel
|
| The RG255G Series from Quectel are 5G RedCap Modules. They are based on the 3GPP Release 17-compliant RedCap technology and support both LTE Cat 4 and 5G Sub-6 GHz standalone (SA) modes, providing efficient 4G/5G global coverage. These modules are backward compatible with Release 15 and 16 networks and partial compatibility with Quectel’s 4G EG2x/EC2x series 4G modules with smaller sizes. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Low-Power LTE Cat NB2 NB-IoT + GNSS Industrial Modules | |
Cellular Module
from STMicroelectronics
|
| The ST87M01 Series from STMicroelectronics are LTE Cat NB2 NB-IoT and GNSS Industrial Modules. They are based on 3GPP Release 15 and support worldwide / regional LTE and GNSS bands. These modules have embedded IoT internet protocols with single-tone/multi-tone/extended TBS and 2 HARQ schemes and also include support for eDRX, PSM, and differential FOTA. |
| |
Download Datasheet |
Product Details | |
|
|
|
| LTE Cat 4 Module with MIMO Support and 2G/3G Fallback | |
Cellular Module
from MeiG Smart Technology
|
| The SLM770A from MeiG Smart is an LTE Cat 4 Module designed to ensure compatibility with the existing 2G and 3G network infrastructure. This module covers LTE-FDD/TDD, WCDMA, EDGE GPRS, and GSM networks to support multiple users with different use cases and can provide network communication even in remote areas. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| 3GPP Rel-17 Compliant, M.2 Form-Factor 5G RedCap Modules | |
Cellular Module
from Fibocom
|
| The FM330 Series from Fibocom are 5G RedCap Modules compliant with the 3GPP Rel-17 standards. They are based on MediaTek’s T300 5G modem, which utilizes a 6 nm radio frequency system-on-chip (RFSOC) single-die solution. These modules support global mainstream 5G frequency bands with channel bandwidths of up to 20 MHz and deliver a peak data rate of up to 227 Mbps (downlink) and 122 Mbps (uplink). |
| |
Download Datasheet |
Product Details | |
|
|
|
| Bluetooth 5.0 Module for IoT Applications | |
RF Module
from Murata
|
| The MBN52832 from Murata is a Bluetooth Low Energy module that supports Bluetooth 5.0. This module is based on the Nordic nRF52832 Bluetooth Smart SoC and enables ultra-low power connectivity for high throughput data communication. The module consists of the SoC, RF Front End and Crystal, measuring 7.4 x 7.0 x 0.9 mm. It is ideal for IoT Applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
| LTE Cat 1.bis Modules for Space-Constrained Applications | |
Cellular Module
from u-blox AG
|
| The LEXI-R10 Series from u-blox are LTE Cat 1.bis Modules that are designed for size-constrained devices. They support multi-band LTE-FDD and can connect with LTE Cat 1 networks. These modules have an embedded Wi-Fi radio to scan Wi-Fi hotspots for indoor locations and support the u-blox CellLocate positioning service. They are ideal for asset tracking, telematics, healthcare, and wearable applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Front-End Module for Sub-6 GHz LTE, 4G, and 5G-NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58277-31 from Skyworks is a Front-End Module (FEM) for LTE, 4G, and 5G-NR applications. It consists of PA blocks, a MIPI standard digital control block, filter, antenna, and Tx-Rx switches, and low noise amplifiers (LNA). The module covers multiple bands and meets the spectral linearity requirements of CP-OFDM and DFTS-OFDM modulations with up to 100 MHz bandwidth and up to 273 resource block allocations. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Outdoor Multi-Gigabit Radio from 71-76/81-86 GHz | |
Microwave Backhaul Radio Links
from Intracom Telecom
|
| The UltraLink-GX80 from Intracom Telecom is a compact all-outdoor Ethernet/CPRI Radio that operates from 71-76 GHz and 81-86 GHz. With a high system gain, it achieves a throughput of up to 10 Gbps (full duplex) which makes the radio suited for use in demanding applications requiring ultra-high capacity. It has channel sizes of 125/250/500/750/1,000/1,500/2,000 MHz. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| 28 GHz Low-Latency RF Repeater for 5G Base Stations | |
RF Repeaters
from Pivotal Commware
|
| The Pivot 5G from Pivotal Commware is an RF Repeater for extending, redirecting and shaping mmWave signals from 5G base stations on demand with low latency. It operates from 27.50 to 28.35 GHz and is available as donor units with a range of more than 1000 ft, and as three types of service units. The donor unit and the narrow beam type service unit utilize antennas based on Pivotal’s patented Holographic Beam Forming (HBF) technology to achieve a low cost, size, weight and power consumption profile. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Real-Time & Continuous Spectrum Intelligence Platform | |
RF Spectrum Analyzer
from thinkRF
|
| The Spectrum eXperience Management (SXM) System from thinkRF is a real-time wireless infrastructure monitoring / intelligence platform. It provides continuous monitoring of all major 4G and 5G parameters with immediate notification of any new, changed or discontinued deployments in an area. SXM comprises of powerful thinkRF sensors (SXM nodes) to collect RF spectrum data, a cloud to store data with maximum cybersecurity and an insightful software (SXM API) that provides advanced analytics to users. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2/8/16-Port Test System for Wi-Fi 7, Wi-Fi 6E, and Wi-Fi 6 | |
RF Test Set
from LitePoint
|
| The IQxel-MX from LitePoint is a Test System for Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, and all other Wi-Fi standards. It also supports all Bluetooth device standards (1.x, 2.x, 3.0, 4.x, 5) and the newly released BT 5.1 and BT 5.2 along with ZigBee, Z-Wave, and WiSUN. The system also supports LoRa and Sigfox LPWAN technologies. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 28 GHz, Integrated 8x8 Phased Array Antenna Module | |
Electronically Steerable Antenna
from Fujikura
|
| The FutureAccess Type-C from Fujikura is a Phased Array Antenna Module (PAAM) that operates from 24.25 to 27.50 GHz and 26.50 to 29.50 GHz. It consists of beamformer ICs, a frequency conversion IC, bandpass filters, EEPROM, and an array antenna in one module, offering optimal total cost of ownership (TCO) and reduced development time. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
