| Featured Products this Week . |
|
|
|
|
|
|
|
|
|
|
|
|
| High Reliability, Air Core Power Inductors 22 to 117 nH | |
RF Inductor
from Coilcraft
|
| The 1212VS Series from Coilcraft are High Reliability Power Inductors with inductance values from 22 to 117 nH. These air core inductors can handle up to 57 A of current with no core loss and have Q factors up to 200 (400 MHz). They are available in packages that measure 12.00 x 11.50 x 11.30 mm with RoHS-compliant tin-silver over copper terminations. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| High-Linearity SPDT MEMS Switch from DC to 34 GHz | |
RF Switch
from Analog Devices
|
| The ADGM1001 from Analog Devices is an SPDT MEMS Switch that operates from DC to 34 GHz. It provides 32 dB of isolation, has a switching time (ON/OFF) of 200 µs, and a power-up time of 4 ms. This switch can handle an input power of up to 33 dBm and has an insertion loss of less than 1.5 dB. It is fabricated using Analog Devices’ micro-electromechanical system (MEMS) switch technology which enables a small form factor, wide RF bandwidth, highly linear, and low insertion loss that is operational down to DC. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Rugged 1227/1575 MHz GPS Filter Amplifier | |
GPS/GNSS Filter Amplifier
from Mercury Systems
|
| The L5996 from Mercury Systems is a GPS Filter Amplifier with center frequencies of 1575.4 MHz (L1 channel) and 1227.6 MHz (L2 channel). It has a 3 dB bandwidth of ±35 MHz around each center frequency and provides a gain of more than 19 dB. This filter / amplifier provides an output power of up to 12 dBm with a noise figure of less than 2.5 dB and rejection of more than 40 dBc in the stopbands. |
| |
Download Datasheet
Product Details | |
|
|
|
| Assembly with 24 Attenuators from 200 to 6000 MHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50PA-1197 from JFW Industries is a Solid-state Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It consists of 24 solid-state step attenuators, each with an attenuation range from 0-95 dB with 1 dB steps. The attenuators have an insertion loss of less than 8.8 dB and a typical switching speed of 4 microseconds. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9 kHz to 18 GHz Receiver with 100 MHz Real-Time Bandwidth | |
RF Spectrum Analyzer
from CRFS
|
| The RFeye Node 100-18 is a real-time spectrum analyzer operates from 9 kHz to 18 GHz with an instantaneous bandwidth of up to 100 MHz and tuning resolution of 1 Hz. It is a complete spectrum monitoring and geolocation system designed for remote deployment in distributed networks both indoors and outdoors, including hostile environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Tri-Band Multi-Coupler from 0.1 to 6000 MHz | |
Multicoupler
from Mu-Del Electronics
|
| The MDP-13216-3C from Mu-Del is a Tri-band Multi-Coupler that operates from 0.1 to 6000 MHz. It has 3 channels for the HF band, V/UHF band and L/S/C band. This multi-coupler provides an output-to-output isolation of more than 50 dB and has a noise figure of less than 8 dB (on each channel). It is available in an enclosure that measures 1.75 x 19.00 x 11.00 inches with one N-type input connector and eight SMA output connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 x 256 Switch Matrix 0.9 to 2.5 GHz | |
Switch Matrix
from Quantic Corry
|
| The RFMS-4X256-B from Corry Micronics is a 4 x 256 Switch Matrix that operates from 0.9 to 2.5 GHz. It allows 4 RF common ports to be routed to any of 256 RF Ports. The switching system has a compression point of 30 dBm, return loss under -8 dB and an isolation of 80 dB. This is a blocking matrix, which means 2 common ports cannot be connected to the same output port simultaneously. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ku-Band Block-Up Converter from 950 to 1700 MHz | |
Block Up Converter
from Skyware Technologies
|
| The TZ1006 Series from Global Skyware is a Block-Up Converter that converts an input frequency from 950 to 1700 MHz to an output frequency from 13.75 to 14.5 GHz. It provides a P1dB of up to 34.5 dBm with a gain of over 50 dB. The device requires a supply voltage of 13 to 28 V and consumes up to 24 watts of power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7 GHz Wireless Connectivity Test Set for Wi-Fi 7 and Cellular 5G Networks | |
RF Test Set
from Keysight Technologies
|
| The E7515W from Keysight Technologies is a UXM Wireless Connectivity Test Platform. It has been designed to support Wi-Fi-to-Cellular internetworking testing of both Wi-Fi clients (STAs) and access points (APs) from 380 MHz to 7.125 GHz (frequency resolution of 1 Hz). This test platform adds support for Wi-Fi 7 testing and enables advanced Wi-Fi/cellular co-existence testing and unique testing of 5G fixed wireless access (FWA) devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 W GaN on SiC RF Power Transistor from 2 to 12 GHz | |
RF Transistor
from United Monolithic Semiconductors
|
| The CHK5010-99F from United Monolithic Semiconductors (UMS) is an RF Power Transistor that operates from 2 to 12 GHz. It delivers a saturated output power of 4 W (~36 dBm) with a small signal gain of 21.6 dB and a power-added efficiency of 72%. This transistor supports both CW and pulsed operating modes. It is manufactured using GaN HEMT technology on a SiC substrate and requires a DC supply of 30 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10-meter Rugged and Slim RFID Reader with Integrated Antenna | |
RFID Antenna
from FlexiRay
|
| The FlexiRay SFX is an RFID Reader with an integrated antenna. This IP65-rated reader has a slim and rugged design that enables the creation of RFID reading zones in entrances, exits, corridors, doors and gates. It operates at a frequency range from 865.6 to 867.6 MHz, has a reading speed of up to 750 tags/second and complies with the EPCGlobal Class 1 Gen2, 18000-6C protocol. |
| |
Download Datasheet
Product Details | |
|
|
|
| Miniature M-Code GPS Receiver | |
GNSS Module
from BAE Systems
|
| The Miniature PLGR Engine – M-Code (MPE-M) GPS Receiver from BAE Systems is capable of receiving existing operational GPS signals along with the newer M-Code signal. It delivers geolocation and precise positioning capabilities for space-constrained applications while providing increased security and anti-jam capabilities. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaAs Non-Reflective SPDT Switch MMIC from 26.5 to 40 GHz | |
Waveguide Switch
from Renaissance Electronics Corporation
|
| The HSWM22801-351 from Renaissance Electronics Corporation is a Non-Reflective SPDT Switch MMIC that operates from 26.5 to 40 GHz. It can handle an input power of up to 10 W (~40 dBm) and has an insertion loss of less than 3.1 dB. The switch supports TTL control, has a switching speed of 30 ns and provides more than 38 dB of isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz Rel-17 Multi-band 5G NR/LTE-FDD/LTE-TDD Modules | |
Cellular Module
from SIMCom
|
| The SIM8230X from SIMCom are Sub-6 GHz Multi-Band 5G NR/LTE-FDD/LTE-TDD Modules. They have a 3GPP Rel-17 Compliant 5G Standalone architecture, with a downlink data rate of up to 220 Mbps and an uplink data rate of up to 100 Mbps. These modules require a DC supply from 3.3 to 4.4 V. They are available in LGA + LCC packages that measure 30.0 x 30.0 x 2.5 mm and can be controlled via USB 2.0, PCM, I2C, PCIe, and GPIO interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact Bluetooth v5.4 Low Energy Chipset | |
Wireless Chipset
from EM Microelectronic
|
| The EM9305 from EM Microelectronic is an Ultra-Low Power Bluetooth 5.4 Systems-on-Chip (SoC). It has a highly flexible architecture that allows this SoC to act as a companion IC to any ASIC or MCU-based product. This SOC features a state-of-the-art 2.4 GHz transceiver, a low-power receiver with excellent sensitivity/selectivity, and a programmable transmitter up to +10 dBm for optimized output power and current consumption. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G-NR Automotive Module for Global Use Outside China | |
V2X Module
from ALPS ALPINE
|
| The UMNZ1 from Alps Alpine is a 5G-NR Module that is designed for automotive applications. It is backward compatible with 2G GSM, 3G WCDMA, and 4G LTE and supports 3GPP Release 15-compliant C-V2X features. This module can be used in combination with V2X systems and provides the capability to communicate and interact with everything around vehicles such as road infrastructure, other vehicles, and pedestrians. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bi-Directional Tower Mount Amplifier from 1920 to 2170 MHz | |
Tower Mount Amplifier
from CommScope
|
| The E14R00P07 from CommScope is a Tower Mounted Amplifier that operates from 1920 to 1980 MHz in Rx mode and 2110 to 2170 MHz in Tx mode. In the Rx mode, it provides a nominal gain of 12 dB and has a noise figure of less than 1.4 dB. In the Tx mode, it has an insertion loss of less than 0.4 dB and a 3rd order PIM of -160 dBc. This amplifier requires a DC supply from 7 to 30 V and consumes 100 mA of current @ 12V. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double-ridged Horn Antenna from 10 to 67 GHz | |
Horn Antenna
from RF SPIN
|
| The DRH1067 from RFSpin is a Double-ridged Horn Antenna that operates from 10 to 67 GHz. This linearly polarized antenna provides a gain of 23 dB and has an antenna factor of 36 to 43 dB/m and a VSWR of less than 1.8:1. It is available in a housing that measures 158 x 59 x 43 mm with a 1.85 mm (female) coaxial connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G NR + Wi-Fi 6E + Bluetooth 5.2 SoC for Industrial Applications | |
Wireless Chipset
from Qualcomm
|
| The QCM4490 from Qualcomm is a 5G NR + Wi-Fi 6E System on Chip (SoC) with added support for Bluetooth 5.2 connectivity. It provides advanced features that are required by industrial handheld, industrial computing, and other IoT devices. This module provides significant reductions in latency and increased responsiveness for latency-sensitive applications (voice, video). |
| |
Download Datasheet
Product Details | |
|
