| Featured Products this Week . |
|
|
|
|
|
|
|
| 30 dB Low Noise Amplifier from 0.5 to 50 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PEC-30-0R5G50G-22-12-24FF from Planar Monolithics Industries is a Low Noise Amplifier that operates from 0.5 to 50 GHz. It provides a gain of 30 dB (±2.5 dB flatness), has a noise figure of less than 9 dB and a P1dB of over 17 dBm. This LNA requires a DC supply of 12 to 15 V and consumes 600 mA of current. It is available in a module that measures 1.37 x 1.00 x 0.60 Inches and has 2.44 mm-female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way mmWave Wilkinson Power Divider from 6 to 70 GHz | |
Power Divider
from Marki Microwave
|
| The MPDW-0670CSP2 from Marki Microwave is a 2-Way mmWave Wilkinson Power Divider MMIC that operates from 6 to 70 GHz. It can handle an input power of provides an isolation of more than 15 dB and has an insertion loss of less than 8 dB. This power divider has an amplitude balance of 0.1 dB and a phase balance of 1°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Power Divider from 25 to 31 GHz | |
Power Divider
from TMYTEK
|
| The COMP-PCS-2531-BEK28 from TMYTEK is a 2-Way Power Divider/Combiner that operates from 25 to 31 GHz. It has an insertion loss of 2 dB, provides 15 dB of isolation and has a return loss of 10 dB. This power divider is available in a module that measures 25.4 x 15.2 x 10.2 mm with 2.92 mm (K-type) connectors and is ideal for 5G applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Square Air Core Inductors from 47 to 500 nH | |
RF Inductor
from Coilcraft
|
| The 2929SQ Series from Coilcraft are Square Air Core Inductors with inductance values from 47 to 500 nH. They do not use a magnetic core which enables high Q and the low losses for high-frequency applications. These inductors have a Q factor of up to 230 at 400 MHz and can handle current up to 5.7 A. They have flat top and bottom for reliable pick and place and mechanical stability and solder coated leads for excellent solderability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W, Class A/AB Solid-State Power Amplifier from 18 to 26.5 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-1826G-200 from Advanced Amplifiers is a Solid-State Power Amplifier (SSPA) that operates from 18.0 to 26.5 GHz. It delivers a saturated output power of more than 200 W with more than 53 dB of gain. This SSPA has a Class A/AB linear design, offering high efficiency with excellent reliability and ruggedness. It has spurious levels of -20 dBc and harmonics of -30 dBc. |
| |
Download Datasheet
Product Details | |
|
|
| Download Now: New Satellite & Space eBook | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 9 W LDMOS/GaN Doherty Power Amplifier Module from 3.4 to 3.8 GHz | |
RF Amplifier
from NXP Semiconductors
|
| The Airfast® A5M36TG140 from NXP Semiconductors is a Fully Integrated Doherty Power Amplifier Module that operates from 3400 to 3800 MHz. It delivers an output power of 9 W with a gain of 32.6 dB and has a Power Added Efficiency (PAE) of up to 46.4%. This amplifier is based on LDMOS and GaN-on-SiC technology and is designed to ensure high performance for TDD and FDD LTE systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.2 kW LDMOS Power Transistor from 960 to 1215 MHz for Avionics Application | |
RF Transistor
from Ampleon
|
| The BLA9H0912LS-1200PG from Ampleon is an LDMOS Power Transistor that operates from 960 to 1215 MHz. It delivers an output power of 1200 W with a power gain of 19 dB and has a drain efficiency of 60%. This transistor has integrated dual-sided ESD protection for excellent off-state isolation. It offers high flexibility with respect to all pulse formats, has a pulse droop power of 0.2 dB, and a rise/fall time of 6 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Band Front End Module for 3G/4G/5G Mobile Devices | |
Front End Module
from Skyworks Solutions
|
| The Sky5® SKY58105-11 from Skyworks is a Mid-Band (MB) and High-Band (HB) Front-End Module that supports 3G/4G/5G mobile devices. It has separate 3G/4G/5G PA blocks operating in the mid-bands and high-bands, a silicon controller containing an MIPI® RFFE® interface, RF band switches, MB and HB antenna switches, bi-directional couplers, and integrated filters. |
| |
Download Datasheet
Product Details | |
|
|
|
| VHF/UHF Software Defined Radio from 30 MHz to 1.8 GHz for Airborne Applications | |
Software Defined Radio
from Collins Aerospace
|
| The TruNet™ AR-1500 from Collins Aerospace is an Airborne Software Defined Radio that operates in the VHF/UHF bands from 30 MHz to 1.8 GHz. It supports 5 kHz, 8.33 kHz, 12.5 kHz, 25 kHz, 1.2 MHz, 5 MHz, 10 MHz, 30 MHz, and software-definable channel bandwidths. This radio provides secure communication and is interoperable with Collins Aerospace and non-Collins Aerospace VHF/UHF radio systems for cost savings. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4/5/6 GHz Front-End Modules for Wi-Fi 6/7 Applications | |
Front End Module
from Qualcomm
|
| The QXM108x from Qualcomm are 2.4/5/6 GHz Wi-Fi Front-End Modules. They comprise small-sized RF Front Ends (RFFEs) with integrated active and passive components for use in Wi-Fi 4, Wi-Fi 6, Wi-Fi 5, and Wi-Fi 7 applications. These modules consist of a power amplifier (PA), a low noise amplifier (LNA), a switch, and a directional coupler. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 GHz Surface-Mount Fixed Frequency PLL Synthesizer | |
Phase Locked Loop
from Z-COMM
|
| The RFS15000C-LF from Z-Communications is a Fixed Frequency PLL Synthesizer that generates frequency of 15 GHz. It provides an output power of -6 dBm with a phase noise of -80 dBc/Hz and has a settling time of 3 ms. This synthesizer has an integrated 10 MHz TCXO reference oscillator (frequency stability of ±10 ppm), phase detector, loop filter, VCO and PIC microcontroller. |
| |
Download Datasheet
Product Details | |
|
|
|
| 13.56 MHz HF Inlay RFID Tag for Non-Metallic Surfaces | |
RFID Tag IC
from SAG
|
| The Tag-it Pro/Plus from SAG RFID is an HF Inlay RFID Tag that operates at a frequency of 13.56 MHz. It has a 64-bit UID memory and a user memory of 2000 bits. This inlay has a TI Tag-it HF-I Plus 2048/Pro RFID chip and is compliant with ISO/IEC 15693 & ISO 18000-3 RF interface protocols. It enables contactless identification and has an anti-collision function that enables the operation of multiple inlays simultaneously in the field of a reader. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Space-Qualified 6-Way Isolated Power Divider from 2.3 to 2.4 GHz | |
Power Divider
from Smiths Interconnect
|
| The SPD701 from Smiths Interconnect is a 6-Way Isolated Power Divider that operates from 2.3 to 2.4 GHz. It can handle a CW input power of up to 6 W, has an insertion loss of less than 9 dB, and an amplitude balance of ±0.7 dB. All channels of this splitter are phase and group delay matched and each channel includes a ferrite isolator on the output. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 dB Directional Coupler from 0.5 to 20 GHz | |
Directional Coupler
from Pulsar Microwave
|
| The CS06-25-436/20 from Pulsar Microwave is a Directional Coupler that operates from 0.5 to 20 GHz. This 6 dB coupler has a directivity of more than 15 dB and has an insertion loss of less than 1.8 dB. The coupler can handle an average input power of up to 25 W and a reflected power of 10 W. It is available in a module that measures 4.40 x 0.70 x 0.40 inches and has SMA connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 W Coaxial Circulator from 2.5 to 3.5 GHz for SATCOM Applications | |
RF & Microwave Circulator
from Renaissance Electronics Corporation
|
| The 3A5BAF from Renaissance is a Coaxial Circulator that operates from 2.5 to 3.5 GHz. It can handle a CW input power of up to 500 W and a peak input power of 5.5 kW. This circulator provides an isolation of 18 dB and has an insertion loss of 0.6 dB. It is available in a module that measures 1.66 x 1.50 x 1.01 inches with N-Type (female) connectors and is ideal for satellite communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 GHz mmWave Flex-to-Board PCB Headers for 5G Applications | |
RF Connector
from MOLEX
|
| The 2188770062 from Molex are mmWave Flex-to-Board PCB Headers that have been designed to support frequency signals up to 25 GHz. They can handle a current of up to 1.0 A per contact and has a dielectric withstanding voltage of 250 V (AC). These board connectors can withstand up to 10 mating cycles and enable the high-speed transfer of RF signals while offering space savings and mechanical robustness. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Orbit, Low-Profile Hybrid-GEO-LEO Terminal for Military Applications | |
Electronically Steerable Antenna
from Kymeta
|
| The Osprey™ u8 from Kymeta is a Hybrid-GEO-LEO (HGL) Terminal that can be mounted on various military vehicles and vessels. It provides multi-orbit capability for mission-critical operations while on the move. This flat-panel terminal leverages the OneWeb Low Earth Orbit (LEO) network and combines the flexibility and reliability of GEO satellites with LTE for network redundancy in contested environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz, 7 Gbps Wi-Fi 6E Point-to-Multipoint Backhaul Radio for Dense Environment | |
Microwave Backhaul Radio Links
from Mimosa
|
| The A6 from Mimosa is a Point-to-Multipoint Backhaul Radio that operates from 5150 to 6425 MHz for Wi-Fi 6E applications. It supports 20, 40, 80, and 160 MHz channels, 8x8 multi-user MIMO, and delivers a data rate of up to 7 Gbps (UL/DL). This access point utilizes BPSK-1024QAM, OFDMA, and other PHY layer technologies to ensure sufficient AP capacity to handle large populations in dense urban/rural environments. |
| |
Download Datasheet
Product Details | |
|
