| New RF and Microwave Products this Week . |
|
|
| 8 W GaN Power Amplifier MMIC from 2 to 18 GHz | |
RF Amplifier
from AMCOM Communications, Inc.
|
| The AM02018039WN-SN-R from AMCOM Communications is a GaN Power Amplifier MMIC that operates from 2 to 18 GHz. The amplifier provides a saturated output power of 39 dBm, P1dB of 34 dBm and small signal gain of 20 dB. It requires a 28 V DC supply and consumes less than 1300 mA of current. The amplifier is ideal for instrumentation, commercial telecom transmission equipment and fixed microwave backhaul applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 80 W GaN-on-SiC Power Amplifier from 20 to 512 MHz | |
RF Amplifier
from RFHIC
|
| The RWP03060-10 from RFHIC is a GaN-on-SiC Power Amplifier that operates from 20 to 512 MHz. It has been developed for broadcasting and communication system applications. The amplifier delivers an output power of 80 W with a gain of 38 dB and a power-added efficiency (PAE) of 65.29%. This amplifier is fabricated using GaN-on-SiC technology and attached on an Aluminum sub carrier with full in/out matching for broadband operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Block Up Converter from 28 to 30 GHz for SATCOM Applications | |
Block Up Converter
from EM Research
|
| The DBUC-30000-03 from EM Research is a Block Up Converter (BUC) that converts input frequencies from 1000-2000 MHz (IF) to output frequencies from 28-29 GHz (low-band) and 29-30 GHz (high-band). It delivers an output power of +5 dBm with a gain of 6 dB and provides an image rejection of up to -70 dBc. This converter has spurious levels of less than -60 dBc and a phase noise of -41 dBc/Hz (at 10 Hz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| Double Balanced Mixer from 18 to 50 GHz for Telecom Applications | |
RF Mixer
from ERZIA
|
| The ERZ-MIX-1800-5000-10 from ERZIA is a Double Balanced Mixer with an RF/LO frequency from 18 to 50 GHz and an IF frequency from DC to 20 GHz. It has a conversion loss of 8 dB and LO drive power of 17 dBm. This mixer provides an LO-to-IF/RF-to-IF isolation of 35 dB and an LO-to-RF isolation of 40 dB. It has a compact size and offers excellent modularity, making it ideal for a wide range of industrial, laboratory, SATCOM, telecom, space, military, and aerospace applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by AMCOM Communications | | EOL (End of Life) & Custom Design Experts | | AMCOM Communications are experts in the design of MMIC circuit power amplifiers, low noise amplifiers, phase shifters, attenuators, up-converters, down-converters, and switches up to 40 GHz. They have also been actively contracting for EOL (End of Life) redesigns for numerous large corporations assisting them in maintaining equipment integrity and performance. | | | |
|
|
| Cavity Bandpass Filter from 4.9 to 6.1 GHz | |
Band Pass Filter
from Anatech Electronics
|
| The AB5550B573 from Anatech Electronics Inc. is a Cavity Bandpass Filter that has a passband of 4.9 to 6.1 GHz (5.55 GHz center frequency). It has a passband insertion loss of less than 0.8 dB and a passband return loss of more than 18 dB. This filter has a bandwidth of 1.2 GHz, provides an attenuation (rejection) of more than 20 dB and can handle 25 W of power. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Profile Gap Capacitors with High Q and Self-Resonance Frequencies | |
RF Capacitor
from Quantic Eulex
|
| The XG Series from Quantic Eulex are low-profile gap capacitors with a low insertion loss and ultra-high self-resonance frequencies. The Eulex Gap Capacitors utilize a novel patented internal electrode design allowing for significant leverage in capacitance for a given dielectric. This allows Eulex to offer devices manufactured from ultra-stable materials with high Q and extremely high self-resonance with useful capacitance values far exceeding those offered by other manufacturers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact USB VNA from 9 kHz to 8.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5085 is a 2-Port Vector Network Analyzer from Copper Mountain Technologies that operates from 9 KHz to 8.5 GHz. It can measure all four S parameters S11, S12, S21, S22 and provides a wide variety of analysis capabilities, including time-domain with gating and frequency offset modes. This lab grade VNA is available in a compact package and can be controlled with a Windows or Linux based PC, laptop, tablet, or x86 board computer connected to the measurement hardware via a USB interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| Direct RF Multi-Chip Module Powered by AMD SoCs | |
PXI Digitizer
from Mercury Systems
|
| The RFS1140 from Mercury Systems is a Direct RF Multi-Chip Module System-in-Package (SiP) for broad-spectrum analysis. It combines the processing power of the AMD Versal™ AI Core series adaptive SoC, with Jariet Technologies’ high-speed data converters. This SiP employs data converters from Jariet Technologies with a sample rate of 64 Gsps and has an analog bandwidth of up to 32 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4T4R MIMO Backhaul Radio Link from 703 to 803 MHz | |
Microwave Backhaul Radio Links
from AGTGSS
|
| The Band 28 Macro Cell from AGTGSS is a Microwave Backhaul Radio Link that operates in the n28-Band from 703 to 803 MHz (5G band option available). It has a bandwidth of up to 20 MHz and supports 2 carriers with a sub-carrier spacing of 15 kHz. This radio link operates in FDD mode and uses QPSK and QAM modulation schemes (QAM256/64/16). |
| |
Download Datasheet
Product Details | |
|
|
|
| 90° Hybrid Coupler from 400 MHz to 7.125 GHz | |
90 Degree Hybrid Coupler
from KRYTAR
|
| The 300407125 from KRYTAR is a 90° Hybrid Coupler that operates from 400 MHz to 7.125 GHz. It provides a coupling of 3 dB, an isolation of more than 19 dB, and has an insertion loss of less than 1.8 dB. This coupler can handle an average input power of 20 W and a peak input power of 3 kW. It has an amplitude imbalance of ±1 dB and a phase imbalance of ±5°. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by AMCOM Communications | | |
|
|
| Absorptive Lowpass Filter with Passband from 10 to 870 MHz | |
Low Pass RF Filter
from Werlatone Inc
|
| The AF9313 from Werlatone is an Absorptive Lowpass Filter with a passband from 10 to 870 MHz. It has a passband insertion loss of less than 0.6 dB and provides a rejection of more than 53 dB in the stopband from 1700 to 4000 MHz. This filter can handle an input power of up to 100 W in the passband and eliminates the risk of damage to power amplifiers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Blocking Capacitors with Capacitance Values from 1.5 to 220 nF | |
RF Capacitor
from Knowles
|
| The Opti-Cap® Series from Knowles Precision Devices are Blocking Capacitors with capacitance values from 1.5 to 220 nF. They provide resonance-free DC blocking at frequencies of more than 40 GHz and have a voltage rating of up to 50 V. These capacitors deliver reliable, ultra-low loss operation across various applications including test equipment, fiber optic modules, and broadband microwave/millimeter systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W Class A/AB Solid-State Power Amplifier from 2 to 8 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2085E-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 2 to 8 GHz. It delivers a CW/Pulsed saturated output power of more than 250 W with more than 54 dB of gain and a gain adjustment range of 20 dB. This SSPA is based on a Class A/AB linear design delivering high power over an instantaneous S/C-band bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W Solid-State Power Amplifier from 26.5 to 40 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-2640G-200 from Advanced Test Equipment is a Solid-State Power Amplifier that operates from 26.5 to 40 GHz. It delivers a CW/Pulsed output power of 250 W with a power gain of more than 53 dB. This SSPA has a class A/AB linear design and employs high-power advanced technology devices. It has built-in protection circuits, with extensive monitoring and provides high efficiency, with excellent reliability and ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaN Front-End Module from 24 to 30 GHz for mmWave 5G Applications | |
Front End Module
from mmTron Inc
|
| The TMC252 from mmTron is a GaN Front-End Module that operates from 24 to 30 GHz. This single-chip IC consists of a power amplifier (PA), low noise amplifier (LNA), and transmit-receiver (T/R) switch. It uses a single pole, double throw (SPDT) switch to efficiently route the transmit signal from the PA to a common port, typically connected to an antenna or the received signal from the common port to the LNA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB GaAs Attenuator MMIC from DC to 40 GHz | |
Fixed Attenuator
from Marki Microwave
|
| The ATN20-0040PSM from Marki Microwave is a GaAs RF Attenuator MMIC that operates from DC to 40 GHz. This 20 dB attenuator has an attenuation accuracy of 0.6 dB and has a return loss of 22 dB. It is available in a DFN package that measures 2.0 x 1.3 mm and is ideal for low SWaP applications in 5G test equipment, precision characterization, airborne applications, amplitude matching, and high channel count systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| E-Band mmWave Radio Link from 71 - 76 GHz and 81 - 86 GHz | |
Microwave Backhaul Radio Links
from Vubiq
|
| The HaulPass E10G from Vubiq Networks is a Millimeter Wave Radio Link that operates in the E-Band from 71 to 76 GHz and 81 to 86 GHz. It has a programmable channel bandwidth from 100 MHz to 2 GHz (baud rate, coding, and modulation programmable) with a step size of 31.25 MHz. This radio link incorporates Vubiq Networks’ patented modular integrated waveguide technology and adaptive code modulation and baud (ACMB) technology that instantly sets code rate, modulation and baud in real time, resulting in a hitless adjustment to link conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Stage Modular Low Noise Amplifier from 21 to 31 GHz | |
RF Amplifier
from ReliaSat
|
| The LNA11202131SS from ReliaSat is a Low Noise Amplifier (LNA) that operates in the Ka-Band from 21 to 31 GHz. It provides a gain of 32 dB with a noise figure of less than 2.8 dB. This LNA has a multi-stage design and offers modularity. It incorporates Enable/Disable, current, and temperature sensor functionalities for remote fault analysis. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic InP Low Noise Amplifier from 4 to 8 GHz | |
RF Amplifier
from Low Noise Factory
|
| The LNF-LNC4_8G from Low Noise Factory is a Cryogenic Low Noise Amplifier (LNA) that operates from 4 to 8 GHz. It provides 40 dB of gain with a noise figure of 0.02 dB and a noise temperature of 1.5 K. This LNA uses LNF’s proprietary InP HEMT technology and has an MMIC design that ensures minimal unit-to-unit variation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Band, Multi-Constellation Active GNSS Patch Antenna | |
GPS/GNSS Antenna
from Abracon LLC
|
| The APKG5012GD from Abracon is a Multi-band, Multi-Constellation Active GNSS Patch Antenna that operates from 1176 to 1598 MHz. This right-hand circularly polarized (RHCP) antenna provides a gain of up to 4 dBic and has a VSWR of less than 2.0:1. It has an integrated low noise amplifier that provides a gain of 40 dB with a noise figure of 1.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G IoT Antenna from 600 to 6000 MHz | |
Antenna
from Quectel
|
| The YECN001J1A from Quectel is a 5G IoT Antenna that operates from 600–960 MHz, 1400-2690 MHz and 3300-6000 MHz covering 5G NR Sub-6GHz/4G/3G/2G/LPWA bands. It has an omnidirectional radiation pattern with a high efficiency up to 89.1%. This antenna is designed to work with any ground plane size or in free space for ease of integration. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2x2 MIMO Multipoint Radios with Beam Steering Antenna from 4.9 to 5.85 GHz | |
Microwave Backhaul Radio Links
from Proxim
|
| The MP-10250 BeamX Series from Proxim are Multi-Point Radios that operate from 4.9 to 5.85 GHz. They use a beam steering antenna and a secondary, look-ahead scan radio to avoid interference and maximize the use of the available radio spectrum. These 2x2 MIMO radios are powered by Proxim Wireless Outdoor Router Protocol (WORP), which enables efficient wireless broadband access in a packet-based network. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16-Port Base Station Antenna from 1695 to 4200 MHz | |
Base Station Antenna
from Amphenol Antenna Solutions
|
| The 4U4VT360X12Fxys5 from Amphenol Antenna Solutions is a 16-Port Base Station Antenna that operates from 1695-2700 MHz and 3300-4200 MHz. This ±45°/cross-polarized antenna provides a gain of 11.1 dBi and has a VSWR of less than 1.5:1. It has an azimuth beamwidth of 360°, an elevation beamwidth of 9.9° and supports an electrical downtilt of up to 6°. |
| |
Download Datasheet
Product Details | |
|
