| New 5G Products . |
|
|
|
|
|
|
|
| 7 GHz Wireless Connectivity Test Set for Wi-Fi 7 and Cellular 5G Networks | |
RF Test Set
from Keysight Technologies
|
| The E7515W from Keysight Technologies is a UXM Wireless Connectivity Test Platform. It has been designed to support Wi-Fi-to-Cellular internetworking testing of both Wi-Fi clients (STAs) and access points (APs) from 380 MHz to 7.125 GHz (frequency resolution of 1 Hz). This test platform adds support for Wi-Fi 7 testing and enables advanced Wi-Fi/cellular co-existence testing and unique testing of 5G fixed wireless access (FWA) devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| Analog Transceivers from 600 MHz to 7.2 GHz for Wi-Fi 7/5G Applications | |
RF Transceiver
from Arctic Semiconductor
|
| The IceWings from Arctic Semiconductor are Multi-standard Analog Transceivers that operate from 600 MHz to 7.2 GHz. They have 4 channels (Tx/Rx) with programmable channel bandwidths from 5 to 400 MHz. These transceivers have integrated low-noise amplifiers (LNA) and pre-amplifiers along with two low-phase-noise fractional synthesizers supporting TDD, FDD, and two 2x2 in TDD. |
| |
Download Datasheet
Product Details | |
|
|
|
| Up-Down Converter and Beamformer for 5G mmWave Applications | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1239 from Analog Devices is an Up-Down Converter and Beamformer that operates from 37 to 43.5 GHz. It integrates a 16 (2x8) channel beamformer paired with a 2 transmit (TX) and 2 receive (RX) channel upconverter/downconverter (UDC). This RFIC has on-chip transmit-receive switches that connect the upconverter RF output and downconverter RF input for each polarization into eight independent channels via the 1x8 power splitters/combiners. |
| |
Download Datasheet
Product Details | |
|
|
|
| Receiver Module from 32 to 38 GHz for Radar and 5G Applications | |
Receiver
from ERAVANT
|
| The SSR-3530633012-28-SE1 from ERAVANT is a Receiver Module that converts input frequencies (RF) from 32 – 38 GHz to output frequencies (IF) from DC – 18 GHz. It has a conversion gain of 12 dB with a noise figure of 3 dB. The receiver exhibits good gain flatness and includes a built-in x4 LO multiplier. It requires a DC supply of 8 V and consumes 300 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 28 GHz Integrated 8x8 Phased Array Antenna Module | |
Electronically Steerable Antenna
from Fujikura
|
| The FutureAccess Type-C from Fujikura is a Phased Array Antenna Module (PAAM) that operates from 24.25 to 27.50 GHz and 26.50 to 29.50 GHz. It consists of beamformer ICs, a frequency conversion IC, bandpass filters, EEPROM, and an array antenna in one module, offering optimal total cost of ownership (TCO) and reduced development time. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Beamforming 5G Antenna Module from 37 to 40 GHz | |
Front End Module
from Doosan Corporation Electro-Materials
|
| The DS-MV_39 from Doosan Corporation is a 5G Antenna Module that operates from 37 to 40 GHz. This dual-polarized (horizontally/vertically) antenna module has an EIRP of 38.5 dBm and an azimuth/elevation beam scan range of ±60°. It provides a gain of 45 dB in Tx mode and a gain of 35 dB in Rx mode. The antenna module incorporates an RF front-end module including a 32-array antenna and beamforming IC. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaN Front-End Module from 24 to 30 GHz for mmWave 5G Applications | |
Front End Module
from mmTron Inc
|
| The TMC252 from mmTron is a GaN Front-End Module that operates from 24 to 30 GHz. This single-chip IC consists of a power amplifier (PA), low noise amplifier (LNA), and transmit-receiver (T/R) switch. It uses a single pole, double throw (SPDT) switch to efficiently route the transmit signal from the PA to a common port, typically connected to an antenna or the received signal from the common port to the LNA. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| SIW Bandpass Filter with Passband from 25 to 27 GHz | |
Band Pass Filter
from Mini Circuits
|
| The WSBP-26G+ from Mini-Circuits is an SIW Bandpass Filter that has a passband from 25 to 27 GHz. It has a passband insertion loss of less than 3 dB, provides a stopband rejection of up to 56 dB, and can handle an input power of up to 1 W. This filter offers good insertion loss and high rejection and it is realized in a soft substrate using tight tolerance that guarantees enhanced Q factor and repeatable performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Power Divider from 25 to 31 GHz | |
Power Divider
from TMYTEK
|
| The COMP-PCS-2531-BEK28 from TMYTEK is a 2-Way Power Divider/Combiner that operates from 25 to 31 GHz. It has an insertion loss of 2 dB, provides 15 dB of isolation and has a return loss of 10 dB. This power divider is available in a module that measures 25.4 x 15.2 x 10.2 mm with 2.92 mm (K-type) connectors and is ideal for 5G applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| SP4T Switch from 10 MHz to 8.5 GHz for 5G mMIMO Applications | |
RF Switch
from pSemi, A Murata Company
|
| The PE42445 from pSemi is an SP4T RF Switch that operates from 10 MHz to 8.5 GHz. It provides an isolation of more than 52 dB and has an insertion loss of less than 1 dB. This switch consists of four symmetric RF ports with very high isolation and has a switching time of 200 ns. It is manufactured on pSemi’s UltraCMOS process, a patented variation of Silicon-on-Insulator (SOI) technology, and delivers the performance of GaAs with the economy and integration of conventional CMOS. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Dual-Directional Coupler from 2 to 8 GHz | |
Antenna
from Westell Technologies
|
| The CD-2-2000-8000-10-10-30-SF-SF-SF from Deti Microwave is a Dual-Directional Coupler that operates from 2 to 8 GHz. This 10 dB coupler provides a directivity of 15 dB and has an insertion loss of less than 1 dB. It can handle an average input power of 30 W and has a VSWR of less than 1.5:1. The coupler is available in a module that measures 90.0 x 25.4 mm with SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Module with LTE Cat 4 Fallback | |
Cellular Module
from Telit Communications
|
| The FE910C04 from Telit Cinterion is a 5G RedCap Module that is based on the 3GPP Release 17 RedCap technology. It also supports LTE Cat 4 fallback to enhance uplink performance and coverage. This module is powered by Telit Cinterion’s value-added services, encompassing NExT data plans, connectivity activation, AppZone processing, and OneEdge services. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Layer Ceramic Capacitor for High-Speed 5G Communication Circuits | |
RF Capacitor
from Murata
|
| The GJM022 from Murata is a Multi-Layer Ceramic Capacitor (MLCC) that is designed for high-speed 5G communication circuits. It has a high Q-factor, a low equivalent series resistance (ESR), and a voltage rating of 100 V. This capacitor is manufactured using state-of-the-art thin layer forming and high-precision laminating technologies, enabling miniaturization while not compromising on performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G IoT Antenna from 600 to 6000 MHz | |
Antenna
from Quectel
|
| The YECN001J1A from Quectel is a 5G IoT Antenna that operates from 600–960 MHz, 1400-2690 MHz and 3300-6000 MHz covering 5G NR Sub-6GHz/4G/3G/2G/LPWA bands. It has an omnidirectional radiation pattern with a high efficiency up to 89.1%. This antenna is designed to work with any ground plane size or in free space for ease of integration. |
| |
Download Datasheet
Product Details | |
|
