| New IoT Products . |
|
|
| 3GPP Rel-17 5G RedCap Modules for IoT Applications | |
Cellular Module
from Quectel
|
| The RG255G Series from Quectel are 5G RedCap Modules. They are based on the 3GPP Release 17-compliant RedCap technology and support both LTE Cat 4 and 5G Sub-6 GHz standalone (SA) modes, providing efficient 4G/5G global coverage. These modules are backward compatible with Release 15 and 16 networks and partial compatibility with Quectel’s 4G EG2x/EC2x series 4G modules with smaller sizes. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Module with LTE Cat 4 Fallback | |
Cellular Module
from Telit Communications
|
| The FE910C04 from Telit Cinterion is a 5G RedCap Module that is based on the 3GPP Release 17 RedCap technology. It also supports LTE Cat 4 fallback to enhance uplink performance and coverage. This module is powered by Telit Cinterion’s value-added services, encompassing NExT data plans, connectivity activation, AppZone processing, and OneEdge services. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat1 bis Module for LTE FDD/TDD, GSM and GPRS Bands | |
Cellular Module
from Fibocom
|
| The MC610-EU from Fibocom is an LTE Cat1 bis Module that covers LTE FDD/TDD, GSM, and GPRS bands. It delivers an uplink data rate of up to 10 Mbps and a downlink data rate of up to 5 Mbps. This module supports VoLTE, audio, recording, SMS, Wi-Fi scan, BLE, and other functions. .The MC610-EU provides Tx power of up to 33 dBm and has an Rx sensitivity of -108.5 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low-Power Multi-Band Cat-M/NB-IoT Module for e-Health Applications | |
Cellular Module
from SIMCom
|
| The SIM7080G from SimCom is a Multi-Band Cat-M/NB-IoT Module. It has been designed for applications that require low latency and enables low throughput data communication in a variety of radio propagation conditions. This module supports both Cat-M and NB-IoT technologies in a single package and offers a unique combination of performance, security, and flexibility, providing flexibility and ease of integration for the customer’s application. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| LoRa Connectivity Module for IoT Applications | |
RF Module
from Murata
|
| The Type 2GT from Murata is a LoRa Connectivity Module that operates at 860-930 MHz, 2.4 GHz ISM band and 2.1 GHz satellite S-Band. It provides multi-band LoRa and Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) communication and is designed for global deployment with Radio Law certification obtained for major regions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional SMT Cellular/GNSS Antenna from 698 to 2690 MHz | |
Antenna
from Taoglas
|
| The PCS.50.A from Taoglas is a Cellular and GNSS Antenna that operates from 698 to 960 MHz, 1559 to 1610 MHz and 1710 to 2690 MHz. It is designed specifically for IoT devices with small ground planes and combines aperture tuning and active switching technologies. This linearly polarized antenna has an omnidirectional radiation pattern and provides a peak gain of -7.79 dB with an efficiency of up to 67%. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Bluetooth 5.4 SoC with AI/ML Hardware Accelerator | |
Wireless Chipset
from Silicon Labs
|
| The EFR32BG26 Series 2 from Silicon Labs is a 2.4 GHz Bluetooth 5.4 SoC. It is based on a 32-bit 78 MHz ARM Cortex-M33 with DSP instruction and a floating-point unit for efficient signal processing. This SoC supports Bluetooth Low Energy (Bluetooth 5.4), Bluetooth mesh and proprietary 2.4 GHz protocols. It supports 2 (G)FSK with fully configurable shaping and (G)MSK modulation schemes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Wi-Fi HaLow SoC from 750 to 950 MHz | |
Wireless Chipset
from Newracom
|
| The NRC7394 from Newracom is a Wi-Fi HaLow SoC (System on Chip) that operates from 750 to 950 MHz. It delivers a data rate of up to 15 Mbps and is compliant with the IEEE 802.11ah Wi-Fi HaLow specification. This SoC has an ARM Cortex-M3 CPU for Wi-Fi and customer applications with a 32 KB boot ROM, 1088 KB system SRAM, 16 KB XIP with cache and a retention memory of 48 KB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 GHz RF Front-End Module for NB-IoT and Cat-M1/M2 Applications | |
Front End Module
from Qorvo
|
| The QM55011 from Qorvo is an RF Front-End (RFFE) Module for NB-IoT and Cat-M1/2 applications. It supports low-band (663 to 915 MHz) and mid-band (1695 to 2010 MHz) frequencies. This cellular IoT module includes an integrated harmonic rejection filter, an SP6T Tx/Rx antenna switch, and an SEM. It also features universal multi-band bolt-on power amplifiers with an adaptive biasing scheme for maximum PA efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End RFIC for Wireless IoT Applications | |
Front End Module
from BeRex, Inc.
|
| The 8TR8219 from Berex is a 2.4 GHz Multi-Function Smart Front-End RFIC. It is designed for 802.15.4 Zigbee/Thread, Bluetooth smart, and proprietary ISM wireless protocol systems in the 2.4 GHz band. This RFIC consists of a transmit power amplifier (PA), a receive low noise amplifier (LNA), and a single pole double throw (SPDT) transmit/receive switch in a single compact package. It also comes with built-in filter networks and input/output matching circuitry. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz SOI Front-End Module for IoT Applications | |
Front End Module
from pSemi, A Murata Company
|
| The PE562212 from pSemi is a 2.4 GHz SOI Front-End Module for Thread/Zigbee®/Bluetooth®/ Wi-Fi® IoT applications. It has an integrated power amplifier with an output power of up to 21 dBm and an integrated low-noise amplifier (LNA) with a noise figure of 1.5 dB along with a low-loss bypass path. |
| |
Download Datasheet
Product Details | |
|
