| Featured Products this Week . |
|
|
| Compact 2-Port USB VNA from 20 kHz to 3.0 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S7530 is a 75 Ohm 2 Port compact VNA that operates up to 3 GHz. In addition to S parameters (S11, S12, S21, S22) this VNA has a variety of analysis capabilities, including time-domain with gating and frequency offset modes. It has a wide dynamic range and can be operated with any Windows PC or laptop. This compact VNA can be carried to test sites or shared within a team. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50-Ohm Fire-Retardant Coaxial Cable from DC to 6 GHz | |
RF Cable
from Times Microwave Systems
|
| The LMR-100-FR from Times Microwave Systems is a Fire Retardant Coaxial Cable that operates from DC to 6 GHz. It has a minimum bend radius of 6.35 mm and bending moment of 0.14 Nm. This cable has a diameter of 0.11 inches and an FR-PE non-halogen (non-toxic), low smoke, fire retardant jacket. It is ideal for indoor applications like in-building runs (except air handling plenums). |
| |
Download Datasheet
Product Details | |
|
|
|
| Square Air Core Inductors from 47 to 500 nH | |
RF Inductor
from Coilcraft
|
| The 2929SQ Series from Coilcraft are Square Air Core Inductors with inductance values from 47 to 500 nH. They do not use an air core over a magnetic core which enables high Q and the low losses for high-frequency applications. These inductors have a Q factor of up to 230 at 400 MHz and can handle current up to 5.7 A. They have a flat top and bottom for reliable pick and place and mechanical stability and solder coated leads for excellent solderability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 V Kelvin Bias Tee from 50 kHz to 50 GHz | |
Bias Tee
from HYPERLABS
|
| The HL8445 from Hyperlabs is a Kelvin Bias Tee that operates from 50 kHz to 50 GHz. A Kelvin bias tee is designed for applications where both DC and RF signals are applied to the Device under Test (DUT) and precision DC measurements are required. It eliminates DC biasing errors as the sense coil allows accurate measurement of the DC voltage applied across the DUT. It has a DC breakdown voltage of up to 30 V and a breakdown current of 175 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB GaAs IPD Fixed Attenuator MMIC from DC to 50 GHz | |
Fixed Attenuator
from AmpliTech
|
| The AGATN10 from AmpliTech is a GaAs IPD Fixed Attenuator MMIC that operates from DC to 50 GHz. This 10 dB attenuator has an insertion loss of 9.87 dB and a return loss of 23 dB. It is available as a die that measures 1.00 x 0.75 x 0.1 mm with 50-ohm matched DC-coupled RF ports. This attenuator is ideal for communication systems, point-to-point radio, fiber optics, test equipment and wideband military & space applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Distributed Low-Noise Amplifier MMIC from 2 to 24 GHz | |
RF Amplifier
from Marki Microwave
|
| The ADM-9027CH from Marki Microwave is a Distributed Low-Noise Amplifier (LNA) MMIC that operates from 2 to 24 GHz. It provides a small signal gain of 16 dB with a noise figure of less than 3.5 dB and has an output P1dB of 16 dBm. This LNA is an ideal linear signal amplifier for applications requiring low power consumption and small form factors. |
| |
Download Datasheet
Product Details | |
|
|
| Featured eBook - Download Now! | | |
|
|
| Rackmount 250 W Solid-State Power Amplifier from 26.5 to 40 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-2640G-200 from Advanced Amplifiers is a Solid-State Power Amplifier that operates from 26.5 to 40 GHz. It delivers a CW/Pulsed output power of 250 W with a power gain of more than 53 dB. This SSPA has a class A/AB linear design and has built-in protection circuits, with extensive monitoring and provides high efficiency, with excellent reliability and ruggedness. It is ideal for EMI/RFI, lab, CW/Pulse and all EW communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W GaN Power Amplifier from 18 to 40 GHz for T&M Applications | |
RF Amplifier
from Maury Microwave
|
| The MPA-18G-40G-40 from Maury Microwave is a GaN Power Amplifier (PA) that operates from 18 to 40 GHz. It delivers a saturated output power of more than 40 W with a small signal gain of over 46 dB. This amplifier is manufactured using a state-of-the-art GaN process and includes protection circuitry for safety. It is burn-in and aging tested for high reliability, which includes prolonged storage under extreme temperature conditions and extended amplifier operation over the entire rated temperature range. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Integrated Front-End Module for 3G, 4G/LTE and 5G-NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58260-11 from Skyworks is a Front-End Module for 5GNR, LTE, WCDMA, and CDMA applications. It consists of power amplifier (PA) blocks, single-ended duplexers, antenna, band select switches, and low noise amplifier (LNA). This module uses an enhanced architecture to cover multiple bands and meet the spectral linearity requirements of LTE QPSK, 16QAM, 64QAM, 256QAM modulations, and up to 100 resource block allocations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Active Balun from 40 MHz to 60 GHz for High Data Rate Applications | |
Balun
from SHF Communication Technologies
|
| The SHF BLN60 A from SHF Communication Technologies is an Active RF Balun that operates from 40 MHz to 60 GHz. It converts a single-ended signal into a clean differential waveform with a phase balance of ±2.5° and an amplitude balance of ±0.3 dB. The active configuration amplifies the input signal. This balun has an option for low-frequency compensation (LFC) that reduces the frequency response roll-off. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rackmount RF Shielded Test Enclosure from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1160-AB from RF Electronics is an RF Shield Test Box with a frequency range from 20 MHz to 12 GHz. It is designed for wireless device testing applications and is ideal for 802.11a/b/g/n/ac/ax/be, Bluetooth, RFID, 3G, LTE and 5G FR1 device testing. This shielded enclosure has an internal dimension of 374 x 243 x 473 mm and utilizes thick RF-absorbing foam that deadens standing waves and reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Purpose Airborne VSAT Terminal from 19.2 to 31 GHz | |
SATCOM Terminal
from Orbit Communication Systems
|
| The MPT 46WGX from Orbit Communication Systems is a Multi-Purpose VSAT Terminal that operates from 29 to 31 GHz (Tx) and 19.2 to 21.2 GHz (Rx). It is a modular, highly reliable, and multi-role terminal that is fully operable between the wideband global SATCOM (WGS) system, military Ka-Band, and Viasat’s Global Xpress (GX) constellation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Ridged Horn Antenna from 2 to 18 GHz | |
Horn Antenna
from Antenna Systems Solutions S.L
|
| The ASY-DRHA from Antenna Systems Solutions is a Dual-Ridged Horn Antenna that operates from 2 to 18 GHz. It provides up to 16 dBi of gain and has a VSWR of less than 2:1. It has an antenna factor from 33.7 to 39.3 dB/m (far field) and cross-polar discrimination of more than 25 dB (at boresight). The antenna has high-precision customized mounting interfaces with levels and absorber plates. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaAs Double Balanced MMIC Mixer from 15 to 50 GHz | |
RF Mixer
from Analog Devices
|
| The ADMV1550 from Analog Devices is a GaAs Double Balanced Mixer MMIC with an RF/LO frequency from 15 to 50 GHz and an IF frequency from DC to 20 GHz. It can be used either as an upconverter or a downconverter, and provides an RF-to-IF isolation of 45 dB and an LO-to-RF/LO-to-IF isolation of 35 dB. In upconversion mode, it has an output P1dB of 11 dBm and a conversion loss of 8 dB and in downconversion mode, it has an output P1dB of 10 dBm and a conversion loss of 8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Modular THz Signal Frequency Extender from 470 to 540 GHz | |
Signal Generator Extender
from ACST GmbH
|
| The 1215B-AL from ACST GmbH is a THz Signal Frequency Extender that operates from 470 to 540 GHz (multiplication factor of 36). It requires input frequencies from 13.05 to 15 GHz and provides a THz output with a power of up to 10 mW. This frequency extender has a modular design that allows users to have access to more than one band by combining multiple standard extenders. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Band, Multi-Constellation GNSS Front-end Module | |
Front End Module
from Taoglas
|
| The TFM.120A from Taoglas is a GNSS Front-end Module for L1+B1+G1, L2 and L5+L-bands from 1197 to 1606 MHz. It is a dual-input, single-output module and has a SAW/LNA/SAW/LNA topology in both the low and high-band signal paths to prevent unwanted out-of-band interference from overdriving the GNSS LNAs or receiver. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Bluetooth 5.4 SoC with AI/ML Hardware Accelerator | |
Wireless Chipset
from Silicon Labs
|
| The EFR32BG26 Series 2 from Silicon Labs is a 2.4 GHz Bluetooth 5.4 SoC. It is based on a 32-bit 78 MHz ARM Cortex-M33 with DSP instruction and a floating-point unit for efficient signal processing. This SoC supports Bluetooth Low Energy (Bluetooth 5.4), Bluetooth mesh and proprietary 2.4 GHz protocols. It supports 2 (G)FSK with fully configurable shaping and (G)MSK modulation schemes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flexible On-Metal UHF RFID Tag for FCC Applications | |
RFID Tag
from Identiv
|
| The LA1PADUE0307 from Identiv is a Flexible On-Metal UHF RFID Tag designed for container tracking, metallic commodities and goods, bicycle tracking, and the automotive industry. It is based on the NXP UCODE8 IC with an EPC memory of 128 bits. The tag is extremely thin with a total thickness of ~1 mm and an antenna thickness of 120 µm and has a read range of up to 11 m. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Multi-Port Connector System for Fixed/Rotary Winged Airframes | |
RF Connector
from MegaPhase
|
| The Mega8 from MegaPhase is a Multi-Port RF Connector System that can be used in both fixed and rotary winged airframes. These RF interconnects have spring-loaded interfaces to ensure positive mating under extreme vibration conditions. They consist of individually sealed connector housings and cable assemblies. These housings can accept a variety of cable assemblies including flexible, semi-rigid, HyperFlex cables up to 0.48 inches in diameter. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
