| New RF and Microwave Products this Week . |
|
|
| High-Gain Pre-Driver Amplifier for 5G mMIMO from 3.3 to 4.2 GHz | |
RF Amplifier
from Qorvo
|
| The QPA9822 from Qorvo is a Linear Pre-Driver Amplifier that operates from 3.3 to 4.2 GHz. It provides a gain of 39 dB with a noise figure of 4.5 dB and has an output P1dB of 28 dBm. This amplifier is designed to handle wideband 5G-NR instantaneous signal bandwidths, making it ideal for m-MIMO applications. It has external bias control capability for linearity optimization, a DC power shutdown feature and fast Enable/Disable for TDD operation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 110 GHz, 50-Ohm 1.0 mm Cable Assembly | |
RF Cable Assembly
from HUBER+SUHNER
|
| The 852290XX Series from HUBER+SUHNER are 110 GHz Cable Assemblies. They provide reliable electrical performance, featuring excellent amplitude and phase stability with flexure, crush and torque resistance. These 50-ohm cable assemblies are designed to ensure superior signal integrity, extend service life, and minimize equipment downtime. They have a propagation velocity of 70% and provide a screening effectiveness of more than 90 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Flexible Low-Loss RF Cable | |
RF Cable
from Times Microwave Systems
|
| The LMR-195-UF from Times Microwave Systems is a Flexible Cable that operates up to 6 GHz. It has an outer diameter of 0.195 inches and a minimum bend radius of 0.5 inches. This cable has a shielding effectiveness of more than 90 dB and an attenuation of 0.23 dB/m (at 2.5 GHz). It ensures low loss and can be used virtually anywhere - indoors or outdoors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Distributed Power Amplifier Die from DC to 28 GHz | |
RF Amplifier
from mmTron Inc
|
| The TMC200D from mmTron is a Distributed Power Amplifier that operates from DC to 28 GHz. It delivers a saturated output power of 34 dBm with a linear gain of 15 dB and has a noise figure of 3.5 dB. This GaAs amplifier requires a DC supply of 15 V and consumes 550 mA of current. It is matched to 50-ohms and has a positive gain slope that eliminates the need for RF port matching. |
| |
Download Datasheet
Product Details | |
|
|
|
| Chip Attenuators with Alumina-Substrate from DC to 18 GHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The PCAA Series from Inmet by Spectrum Control are Powerfilm Chip Attenuators that operate from DC to 18 GHz. They are available in attenuation values from 0 to 20 dB and have attenuation stability of 0.0001 dB/dB/°C. These attenuators can handle an input power of up to 5 W and have a VSWR of less than 1.5:1. They have an operating temperature range of -55°C to +150°C. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 6 dB Fixed Attenuator from DC to 110 GHz | |
Fixed Attenuator
from HYPERLABS
|
| The HL9429 from Hyperlabs is a Fixed Attenuator that operates from DC to 110 GHz. It provides an attenuation of 6 dB with an accuracy of ±1 dB. This ultra-broadband attenuator can handle a maximum input power of 24 dBm, has an amplitude match of ±0.5 dB, and a phase match of 5°. It is available in a module that measures 1.141 x 0.377 x 0.377 inches with 1.0 mm female/male connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6.3 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The SAM-60 M3 from HAROGIC Technologies is a Real-Time Spectrum Analyzer with a frequency range from 9 kHz to 6.3 GHz. It has an analysis bandwidth of up to 100 MHz with a spectrum sweep speed of 300 GHz/sec and utilizes FPGA signal processing. This spectrum analyzer is equipped with a preamplifier to achieve a Display Average Noise Level (DANL) of -166.6 dBm/Hz (at 1 GHz) and has an SSB phase noise of -134.1 dBc/Hz (at 1 MHz offset, 500 MHz carrier frequency). |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Cryogenic Amplifier from 6 to 8.5 GHz | |
RF Amplifier
from AmpliTech
|
| The APTC3-06000850-2K00-D2-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 6.0 to 8.5 GHz. It has been designed for cryogenic applications down to 4K, with an industry-low Noise Figure. It provides more than 40 dB of gain with a noise figure of less than 0.029 dB (at 4 K) and has a P1dB of -6 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Class A Solid-State Low Noise Amplifier from 10 MHz to 18 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The LNA2006 from Exodus Advanced Communications is a Solid-State Low Noise Amplifier (SSLNA) that operates from 10 MHz to 18 GHz. It provides a gain of 23 dB with a noise figure of 4.5 dB and has an output P1dB of more than 20 dBm. This amplifier is based on Class A linear advanced technology design and has a small form-factor. |
| |
Download Datasheet
Product Details | |
|
|
|
| 22.3 W GaN Power Amplifier from 17.3 to 21.2 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-1730-2120-44 from ERZIA is a High-Power Amplifier (HPA) that operates from 17.3 to 21.2 GHz. It delivers a saturated output power of 43.5 dBm (~22.3 W) with a small signal gain of 50 dB. This GaN amplifier’s compact size and modularity make it suitable for a wide range of applications. It requires a DC supply of 24 V and consumes less than 170 W of power. |
| |
Download Datasheet
Product Details | |
|
|
|
| Non-Blocking 4x8 Solid-State Switch Matrix from 100 kHz to 4 GHz | |
Switch Matrix
from Becker Nachrichtentechnik GmbH
|
| The RSWM-4X8LR from Becker RF is a 4x8 Switch Matrix that operates from 100 kHz to 4 GHz. It has four inputs and eight outputs interconnected via a non-blocking matrix where a single input can route to multiple outputs simultaneously. This switch matrix has high channel isolation to ensure that signals in adjacent radio channels do not affect each other. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| RF Limiter from 1 to 18 GHz with Flat Leakage of 26.75 dBm | |
Limiter
from Quantic PMI (Planar Monolithics)
|
| The LM-1G18G-2W-SFF-BIAS from Quantic PMI is an RF Limiter that operates from 1.0 to 18.0 GHz. It can handle a CW input power of 2 W and a peak input power of up to 1000 W (~60 dBm, 0.1% duty cycle). This limiter has an insertion loss of less than 2 dB and a flat leakage of 26.75 dBm. It requires a DC supply from 0 V to -10 V and consumes less than 1 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel 10 kW GaN RF Generator from 25.8 to 28.5 MHz | |
Microwave Generator
from RFHIC
|
| The RIU002710K0-20TG from RFHIC is a GaN RF Generator that operates from 25.8 to 28.5 MHz. It has 4 channels can can delivers an RF output power from 2.5 kW to 10 kW with an efficiency of up to 70%. The generator can provides continuous wave (CW) and pulse output power adjustable from 1W to 2500W at 27.12 MHz at each channel. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP68-Rated On-Metal UHF RAIN RFID Tag with 13 m Read Range | |
RFID Tag
from SAG
|
| The Overmolded Brick Metal Tag-PPS from SAG is an on-metal UHF RAIN RFID Tag for industrial applications. It is designed to simplify the reading of objects over a long-range and provides a read range of up to 13 meters (42.6 ft). This on-metal RFID tag uses a Polyphenylene Sulfide (PPS) material and can deliver optimum performance while being embedded on a metallic surface. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End RFIC for Wireless IoT Applications | |
Front End Module
from BeRex, Inc.
|
| The 8TR8217 from Berex is a 2.4 GHz Multi-Function Smart Front-End RFIC that is designed for 802.15.4 Zigbee/Thread, Bluetooth smart, and proprietary ISM wireless protocols. This RFIC consists of a transmit power amplifier (PA), a receive low noise amplifier (LNA), and a single pole double throw (SPDT) transmit/receive switch in a single compact package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 dB Dual-Directional Coupler from 0.01 to 1 GHz | |
Dual Directional Coupler
from Qualwave
|
| The QDDC-10-1000-K2 from Qualwave is a Dual-Directional Coupler that operates from 0.01 to 1 GHz. This 40 dB coupler provides a directivity of more than 20 dB and has an insertion loss of less than 0.45 dB. It can handle an average input power of up to 200 W and has a VSWR of less than 1.35:1. This dual-directional coupler is available in a module that measures 50.8 x 50.8 x 22.35 mm and has N-type (female) and SMA-(Female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 405 MHz Multi-mode 4G LTE Chipset with NTN Support | |
Cellular Module
from GCT Semiconductor
|
| The GDM7243SL from GCT Semiconductor is a Multi-mode 4G LTE Chipset that supports 450 MHz and NTN bands. This 3GPP Rel-14-based chipset consists of an RF transceiver and modem and allows switching between NTN and NB-IoT, CatM, Cat1bis, Cat1, and/or Cat4. It is also compatible with the CBRS spectrum and covers 478 to 698 MHz (TVWS bands). |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Sub-6 GHz Modules for IoT/eMBB/URLLC Applications | |
Cellular Module
from Quectel
|
| The RM500U Series from Quectel are 5G Sub-6 GHz Modules that are optimized for IoT/eMBB/URLLC applications. They deliver a data rate of 2.6 Gbps (DL) and 1 Gbps (UL). These modules are available in three variants: RM500U-CN, RM500U-EA and RM500U-CNV to provide worldwide 5G (standalone and non-standalone architecture) and LTE-A coverage. |
| |
Download Datasheet
Product Details | |
|
|
|
| Software Defined Spectrum Analyzer from 400 MHz to 3 GHz for Remote Spectrum Monitoring | |
RF Spectrum Analyzer
from Avcom
|
| The EVO-RSA-3040A from AVCOM is a Rack-Mount Spectrum Analyzer for remote spectrum monitoring of L-band signals from 400 to 3000 MHz. It has been designed for the measurement and analysis of communications and broadcast carriers, making Satcom link, L-Band carriers, easy to measure, monitor, and record. The EVO-RSA provides excellent uplink, downlink frequency and amplitude accuracy along with resolution bandwidth (RBW) selection from 1kHz to 1MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Beam Steering Antenna from 17 to 31 GHz with GNSS Capability | |
Electronically Steerable Antenna
from ReliaSat
|
| The LEOLINK200 from ReliaSat is a Beam Steering Antenna that operates in the Ka-Band from 27 – 31 GHz (Tx) and 17 – 21 GHz (Rx). It can be used for satellite aviation, and ground communication in remote areas and for 5G system applications. This antenna has a low profile with a flat geometry, enabling wide operational bandwidth, good polarization, and high EIRP. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| mmWave Horn Antennas from 33 to 110 GHz for Test and Measurement Applications | |
Horn Antenna
from Pasternack Enterprises Inc
|
| The PEW Series from Pasternack are Millimeter-wave Horn Antennas that operate from 33 to 110 GHz. They are available in both linear and circular polarization options to accommodate different test and measurement scenarios. These antennas have a VSWR of less than 1.3:1 to ensure minimal signal reflection, maximum signal fidelity and maintain consistent gain versus frequency for accurate measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Omnidirectional Gooseneck Antennas from 27 to 2700 MHz | |
Antenna
from L-COM
|
| The LCANOM11xx Series from L-Com are Omnidirectional Gooseneck Antennas that operate from 27 to 2700 MHz. These vertically polarized antennas provide a gain of up to 5.5 dBi and have a VSWR of 1.5:1. Compared to traditional fixed-mount antennas, these gooseneck antennas are flexible and can be bent and repositioned at any angle, allowing users to optimize signal reception and transmission. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12-Port Multi-Beam Base Station Antenna from 1695 to 2690 MHz | |
Base Station Antenna
from CommScope
|
| The 6V-10M-F6 from CommScope is a 12-Port Base Station Antenna that operates from 1695 to 2690 MHz. This ±45° polarized antenna provides a gain of 21.4 dBi and has a VSWR of 1.5:1. It has a horizontal beamwidth of 12°, a vertical beamwidth of 15.4°, and an electrical downtilt of 6°. This antenna provides six beams in 16-degree sectors and covers the entire mid-band. |
| |
Download Datasheet
Product Details | |
|
