| Aerospace & Defense Products . |
|
|
| RF Multiplexer from 2 to 6 GHz for EW/SATCOM Applications | |
Multiplexer
from MtronPTI
|
| The UFQXLSC12 from MtronPTI is a Multiplexer with passbands from 2 – 2.7 GHz, 3 – 3.9 GHz, 4.2 – 4.95 GHz and 5.25 – 6 GHz. It can handle a CW input power of up to 80 W and has a passband insertion loss of less than 1.5 dB. This multiplexer incorporates highly selective, low-loss, and high power-handling bandpass filters. It provides band-to-band isolation of more than 80 dB and harmonic rejection of better than 40 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Signal Scanning Rackmount Spectrum Recorder from 1 to 26 GHz | |
RF Spectrum Recording and Playback System
from Pentek
|
| The Talon RTR 2654 from Pentek is a Sentinel Intelligent Signal Scanner and Recorder that operates from 1 to 26 GHz with a capture and scan bandwidth of up to 500 MHz. This scanner has a spectral scan capability that allows the user to scan the spectrum, while threshold detection allows the system to automatically lock onto and record signal bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| SOSA-Aligned VPX Microwave Transceiver from 0.5 to 18 GHz | |
RF Up-down Converter
from CAES
|
| The Wideband Microwave Transceiver from CAES operates from 0.5 to 18 GHz and has an IF frequency from 2.5 to 4.5 GHz. This SOSA-aligned transceiver is suitable for electronic warfare, ELINT and electronic support, surveillance, and attack applications. It has a modular design and can be configured to accommodate two up or two down conversion channels with an internal synthesizer in a single, 3U slice. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface Mount Tunable Filters from 30 MHz to 3 GHz | |
Tunable Filter
from Pole/Zero
|
| The NANO-POLE Series from Pole/Zero are Tunable Filters operating from 30 MHz to 3 GHz with a 5 to 10% bandwidth. The filters have low insertion loss, good selectivity and can handle an input power of up to 6 dBm. They can be controlled using an SPI control interface and have a tuning speed of 15 uS. These filters feature an on-board 25V switching regulator, which can be disabled to use an external 25V supply. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged 1.5 kW GaN Pulsed Power Amplifier from 2.9 to 3.3 GHz | |
RF Amplifier
from dB Control
|
| The dB-8048 from dB Control is a Pulsed Solid-State Power Amplifier that operates from 2.9 to 3.3 GHz. It delivers a peak output power of 1.5 kW with pulse widths from 0.5 µs to 100 µs and a maximum duty cycle of 10%. This class-B amplifier is based on GaN technology and has an efficiency of better than 20%. It provides a 2nd harmonic rejection of better than -30 dBc, has a propagation delay of less than 100 ns and a maximum droop of 0.8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel, X-Band Beamforming Module from 9 to 10 GHz | |
Beamforming IC
from Spectrum Control
|
| The QTRM from Spectrum Control is a 4-channel Beamforming TR Module that operates from 9 to 10 GHz. It is a versatile, feature-rich module with channel-independent active gain and phase control intended for AESA applications in the X-band frequency range. In the Tx mode, this beamformer module provides a small signal gain of more than 30 dB and offers output power options of 1, 5, or 10 W. At the Rx side, it delivers a gain of 25 dB, an output P1dB of 2 dBm, and a noise figure of 3.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Crane Aerospace & Electronics | | | |
|
|
| 30 MHz to 26.5 GHz Low Noise Amplifier | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PE2-15-30M26R5-5R5-18-12-SFF is a low noise amplifier that operates from 0.03 GHz to 26.5 GHz. The amplifier provides a gain of 15 dB, P1dB of 16 dBm and has a noise figure of 5.5 dB through the band. It requires a 12 to 15 V supply to operate while drawing 230 mA of current. It is available with SMA female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4-Element Multi-Band CRPA GNSS Anti-Jam System | |
GNSS Anti-Jamming Solution
from TUALCOM
|
| The TUALAJ 4200-Mini from TUALCOM is a multi-band CRPA GNSS Anti-Jam System. This system utilizes a 4-element CRPA antenna, a state-of-the-art digital controller and novel beamforming techniques to eliminate interference and ensure uninterrupted operation of GNSS receivers in the presence of up to 3 jamming sources in 2 different frequency bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| Shielded Surface-Mount Bandpass Filter with Passband from 18 to 50 GHz | |
Band Pass Filter
from Cubic Nuvotronics, Inc.
|
| The PSF34B32S from Nuvotronics is a Bandpass Filter with a passband from 18 to 50 GHz. It has a passband insertion loss of less than 1.2 dB and provides more than 40 dB of rejection in the stopband. This interdigital filter uses Nuvotronics’ PolyStrata technology to achieve high performance filtering in a small form factor. It ensures low part-to-part variation and ease of assembly using standard surface-mount technology (SMT) processes. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way MLDD Power Divider from 0.4 to 7.125 GHz | |
Power Divider
from KRYTAR
|
| The 600407125 from KRYTAR is a 2-Way Power Divider that operates from 0.4 to 7.125 GHz. This MLDD (matched-line directional divider) can handle an input power of 10 W, provides more than 15 dB of isolation, and has an insertion loss of less than 1 dB. It uses a MLDD proprietary design to provide ultra-high performance over a broad frequency range. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 10 MHz Rubidium Oscillator for Airborne Applications | |
Rubidium Oscillator
from Safran Electronics & Defense
|
| The LPFRS/AV1 from Safran is a high-performance 10 MHz Rubidium Oscillator designed for rugged airborne applications. It has an excellent frequency retrace of ±0.05 ppb and very low temperature sensitivity. The oscillator provides a sine wave output with a phase noise of -140 dBc/Hz @ 10 kHz offset. It has spurious levels of under -80 dBc and harmonics of better than -25 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Band GNSS Plus Iridium Helical Antennas from 1227.60 to 1626 MHz | |
GPS/GNSS Antenna
from Antcom Corporation
|
| The HL1L2IRA-XSM-4-3 Series from Antcom are Dual-Band GNSS Plus Iridium Helical Antennas that operate from 1227.60 to 1626 MHz. These antennas cover L1/L2 GPS, L1/L2 GLONASS, L-Band Corrections and Iridium bands. They have an “air core” helical structure that provides right-hand circularly polarized (RHCP) gain across the upper hemisphere and a VSWR of less than 2.0:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel Receiver Mixer from 10 to 40 GHz | |
Receiver
from Analog Devices
|
| The ADAR2004 from Analog Devices is a 4-Channel Receiver Mixer with an RF frequency from 10 to 40 GHz, an LO frequency of 2.4 to 10.1 GHz, and an IF frequency from 0 to 800 MHz. It has a gain range from 21 to 41 dB with a noise figure of less than 11 dB and an input P1dB of -20 dBm. Two programmable state machines are included to facilitate simple configuration, control, and fast switching of the frequency multiplier, filter, and receiver sections. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Orbit, Low-Profile Hybrid-GEO-LEO Terminal for Military Applications | |
Electronically Steerable Antenna
from Kymeta
|
| The Osprey™ u8 from Kymeta is a Hybrid-GEO-LEO (HGL) Terminal that can be mounted on various military vehicles and vessels. It provides multi-orbit capability for mission-critical operations while on the move. This flat-panel terminal leverages the OneWeb Low Earth Orbit (LEO) network and combines the flexibility and reliability of GEO satellites with LTE for network redundancy in contested environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Space-Qualified Terminations from DC to 18 GHz | |
Termination
from Cinch Connectivity Solutions
|
| The SQT-0180 Series from Cinch Connectivity Solutions are QPS (Qualified Parts for Space) Terminations that operate from DC to 18 GHz. They can handle an average input power of 0.5 W and a peak power of 50 W . These 50-ohm terminations are designed to meet the space and military industry standards and are suitable for high-grade satellites, deep space explorations, and thermo-vacuum chamber testing applications. |
| |
Download Datasheet
Product Details | |
|
