| Featured Products this Week . |
|
|
| Ultra-Broadband Linear Amplifier from 70 kHz to 65 GHz | |
RF Amplifier
from HYPERLABS
|
| The HL5897 from Hyperlabs is a Linear Amplifier that operates from 70 kHz to 65 GHz. It delivers an output power of up to 17.3 dBm with a small signal gain of 13.5 dB. This amplifier is optimized as a data driver to amplify signals with minimum eye distortion and is designed for use as a linear gain block in fiber optic receiver channels or 112 Gbps PAM4 signaling applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1.5 kW Power Combining Assembly from 2.5 to 7.5 GHz | |
Waveguide Combiner / Divider
from Scientific Microwave Corporation
|
| The WRD250 from Scientific Microwave Corporation is a 2-Way Power Combining Assembly that operates from 2.5 to 7.5 GHz. It consists of a 2-way combiner integrated with a dual broad-wall coupler that has a forward/reverse coupling of 30 dB. This assembly offers a high matching level with low insertion loss which is suitable for power amplifying structures and antenna feeding systems used in radars, satellite systems, and power combining networks. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Flexible, Low-Loss Braided Cable | |
RF Cable
from Times Microwave Systems
|
| The LMR-240-UF-FR from Times Microwave Systems is a Low-Loss, Flexible Braided Cable that operates up to 6 GHz. It has an outer diameter of 0.242 inches and a minimum bend radius of 0.75 inches with a bending moment of 0.125 ft-lb. Times claims this cable performs better than RG cables of similar size and provides significantly better attenuation, shielding effectiveness, and UV resistance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bandpass Filter with a Center Frequency of 3.96 GHz | |
Band Pass Filter
from Quantic PMI (Planar Monolithics)
|
| The BPF-3D96G-65M-SFF from Quantic PMI is a Bandpass Filter with a passband from 3.9275 to 3.9925 GHz and a center frequency of 3.96 GHz. It has a passband insertion loss of less than 1.4 dB and provides an out-of-band rejection of more than 40 dB. This bandpass filter has an operating temperature range from -45°C to +70°C. It is available in a module that measures 1.42 x 0.79 x 0.63 inches with SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rackmount RF Shielded Test Enclosure from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1160-AL from RF Electronics is an RF Shield Test Box with a frequency range from 20 MHz to 12 GHz. It is designed for wireless device testing applications and is ideal for 802.11a/b/g/n/ac/ax/be, Bluetooth, RFID, 3G, LTE and 5G FR1 device testing. This shielded enclosure has an internal dimension of 374 x 243 x 473 mm and utilizes thick RF-absorbing foam that deadens standing waves and reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 250 W Solid-State Power Amplifier from 2.4 to 2.5 GHz | |
RF Amplifier
from Mini Circuits
|
| The ZHL-2425-250X+ from Mini Circuits is a Solid-State Power Amplifier that operates from 2.4 to 2.5 GHz. It delivers an output power of 300 W (54 dBm) with a gain of 40 dB and has a power-added efficiency (PAE) of 60%. This SSPA supports both CW and pulsed operation and has a built-in unit for monitoring and protection of temperature, current, and forward & reflected power. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-10 GaAs Balanced Mixer from 75 to 110 GHz | |
Waveguide Mixer
from HASCO Components
|
| The HWMX10-SFW from Hasco is a Waveguide Balanced Mixer with an RF/LO frequency range from 75 to 110 GHz and an IF frequency range from 0.1 to 10 GHz. It requires an LO drive power of 10 dBm and provides a conversion loss of 9.5 dB with an LO to IF isolation of 20 dB. This mixer utilizes the best performance GaAs Schottky beam-lead diodes, and it can be used both as an up-converter or down-converter. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount 90° Hybrid Couplers from 2 to 6 GHz | |
90 Degree Hybrid Coupler
from KYOCERA AVX
|
| The DB0603N from KYOCERA AVX are 90° Hybrid Couplers that operate from 2 to 6 GHz. These 3 dB couplers provide an isolation of more than 10 dB and have an insertion loss of less than 0.9 dB. They can handle an input power of up to 10 W, have an amplitude balance of ±1 dB, and a phase balance of ±3° (relative to 90°). |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE/5G-NR Front-End Module for Handset and Smartphone Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58258-21 from Skyworks is a Front-End Module that supports LTE and 5G-NR bands. It consists of PA blocks, wide bandwidth filters, a MIPI standard digital control block, a single-ended filter, antenna and Tx-Rx switches, and a low noise amplifier (LNA). This module utilizes an enhanced architecture and meets the spectral linearity requirements of CP-OFDM and DFTS-OFDM modulations with up to 100 MHz bandwidth and up to 273 resource block allocations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Bandpass Filter with Passband from 47.2 to 48.2 GHz | |
Band Pass Filter
from Knowles
|
| The B479KB0S from Knowles is a Bandpass Filter with a passband from 47.2 to 48.2 GHz and a center frequency of 47.9 GHz. It has a passband insertion loss of less than 4.25 dB with out-of-band rejection of more than 40 dB (low-side) and 20 dB (high-side). This AS9100-certified filter utilizes DLI’s low-loss temperature-stable materials, offering small size and minimal performance variation over temperature. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single Junction Cryogenic Circulator from 2.8 to 4.3 GHz | |
RF & Microwave Circulator
from Low Noise Factory
|
| The LNF-CIC2.8_4.3A from Low Noise Factory is a Cryogenic Single Junction Circulator that operates from 2.8 to 4.3 GHz. At 77K, it has an insertion loss of 0.2 dB and provides 20 dB of isolation. This circulator has an operating temperature range from 0.01 K to 100 K and has been designed to meet the strict requirements of ultra-low temperature physics research. |
| |
Download Datasheet
Product Details | |
|
|
|
| 35 dB Variable Attenuator in Hermetic Package from 0.5 to 16 GHz | |
RF Variable Attenuator
from United Monolithic Semiconductors
|
| The CHT4660-FAB from UMS is a Wideband Variable Attenuator that operates from 0.5 to 16 GHz. It has an attenuation range of 35 dB and can handle up to 27 dBm of power. The attenuator is fabricated on a UMS proprietary very linear MESFET process with 0.7µm gate length. This attenuator is available in a surface-mount, a metal-ceramic hermetic package that measures 6 x 6 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Front-End RFIC for Wireless IoT Applications | |
Front End Module
from BeRex, Inc.
|
| The 8TR8217 from Berex is a 2.4 GHz Multi-Function Smart Front-End RFIC that is designed for 802.15.4 Zigbee/Thread, Bluetooth smart, and proprietary ISM wireless protocols. This RFIC consists of a transmit power amplifier (PA), a receive low noise amplifier (LNA), and a single pole double throw (SPDT) transmit/receive switch in a single compact package. |
| |
Download Datasheet
Product Details | |
|
|
|
| Quad-Ridge Flared Horn Antennas | |
Horn Antenna
from Cosmic Microwave Technology, Inc.
|
| The QRFH-HA-6-FL from Cosmic Microwave Technology are Quad-Ridge Conical Flared Horn Antennas that have been designed to efficiently illuminate microwave reflector antennas over a frequency range from 0.5 to 18 GHz (FL to 6 FL where FL is 0.5 to 3 GHz). The feeds are dual-linear polarized designed for a given half-angle, HA, subtended by the reflector or sub-reflector facing the feed, specified for each feed. |
| |
Download Datasheet
Product Details | |
|
|
|
| Vehicular Software Defined Radio from 30 to 512 MHz/1 to 1.8 GHz | |
Software Defined Radio
from Elbit Systems
|
| The E-LynX™ Vehicular MP from Elbit Systems is a Software Defined Radio (SDR) that operates from 30 to 512 MHz and 1 to 1.8 GHz. It is based on the SCA 2.2.2 architecture, supports FM, BPSK, GMSK, PSK, and QAM modulation schemes, and has a bandwidth of up to 4 MHz. In Tx mode, this SDR delivers an output power of 50 W, has spurious emissions of -80 dBc, harmonic emissions of better than -60 dBc, and includes open and short-circuit protection. It has an Rx sensitivity of -116 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thermally-Enhanced OCXO from 10 to 50 MHz for 5G/6G RANs | |
OCXO
from Rakon
|
| The ROM1490X from Rakon is an Oven-Controlled Crystal Oscillator (OCXO) that operates from 10 to 50 MHz. It provides a CMOS output waveform with an SSB phase noise of -155 dBc/Hz (at 1 kHz offset) and has a frequency stability of ±3 ppb. This OCXO has a warm-up time of 180 seconds and a g-sensitivity of 0.9 ppb/g. It incorporates Rakon’s proprietary Mercury™ ASIC and XMEMS® resonator technologies to provide increased stability and holdover performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 45cm Maritime VSAT Terminal from 10.7 to 14.5 GHz | |
VSAT Terminal
from Intellian
|
| The v45C from Intellian is a 45cm Maritime VSAT Terminal that operates in the Ku-Band from 13.75 to 14.5 GHz (Tx Band) and 10.7 to 12.75 GHz (Rx Band). This linear, cross-polarized terminal provides a gain of 34.8 dBi in Tx mode and 33.2 dBi in Rx mode. It is designed to deliver enhanced connectivity and user experience to smaller boats and vessels, including fishing, leisure, commercial, and government. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade Sub-6 GHz 5G Module with eCall Support | |
V2X Module
from Rolling Wireless
|
| The RN91xx from Rolling Wireless is an Automotive-Grade Release-15 5G Module that supports sub-6 GHz 5G bands, LTE-FDD, LTE-TDD, WCDMA and 2G. It supports SA/NSA network architectures and provides optional C-V2X (modem) and DSDA features. The module is based on a Qualcomm SA515M chipset and has dedicated flash and RAM which enhances security, reduces system complexity and lowers overall cost. |
| |
Download Datasheet
Product Details | |
|
|
|
| 28 GHz, Integrated 8x8 Phased Array Antenna Module | |
Electronically Steerable Antenna
from Fujikura
|
| The FutureAccess Type-C from Fujikura is a Phased Array Antenna Module (PAAM) that operates from 24.25 to 27.50 GHz and 26.50 to 29.50 GHz. It consists of beamformer ICs, a frequency conversion IC, bandpass filters, EEPROM, and an array antenna in one module, offering optimal total cost of ownership (TCO) and reduced development time. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation-Tolerant Space Data Link from 969 to 1206 MHz for LEO Operations | |
Data Link
from Collins Aerospace
|
| The SDL-1000 from Collins Aerospace is a Space Data Link that operates in the L-band from 969 to 1206 MHz. It supports Joint All Domain Command and Control (JADC2) requirements for real-time information exchange between Low-Earth Orbits (LEO) and the terrestrial domain in the connected battlespace. This data link supports the U.S. Space Development Agency’s (SDA) Tranche 1 Transport Layer (T1TL) program. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 kW GaN Solid-Sate Power Transmitter from 9 to 10 GHz | |
RF Transmitter
from Communications & Power Industries
|
| The VSX-3696ON from Communications & Power Industries (CPI) is a Solid-State Power Transmitter that operates from 9 to 10 GHz. It is designed and optimized for pulsed radars and airborne applications and utilizes GaN transistors to provide high gain, high efficiency and excellent pulse fidelity. This X-Band transmitter delivers a saturated output power of 1 kW (with up to 10% duty cycle) with a spurious of better than -50 dBc and harmonics of -35 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Port SPDT/SP6T Mechanical Switches from DC to 50 GHz | |
RF Switch
from SIGLENT
|
| The SSU5000A Series from Siglent are Mechanical Switches that operate from DC to 50 GHz. The series consists of 1 to 4 independent single-pole double-throw (SPDT) mechanical switches or 1 to 2 single-pole six-throw (SP6T) mechanical switches. These switches provide more than 60 dB of isolation, have a switching time of less than 20 ms, and an insertion loss of 0.6 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low Noise Rubidium Signal Generator from 9 kHz to 70 GHz | |
Signal Generator
from Anritsu
|
| The MG36271A from Anritsu is an RF/Microwave Signal Generator with a frequency range from 9 kHz to 70 GHz. It has an atomic clock for frequency stability and an optional internal rubidium frequency reference. Rubidium pushes the envelope in phase noise performance with its low and ultra-low phase noise options. The exceptional frequency stability makes this signal generator ideal for Metrology and high-speed clock applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Point-to-Multipoint Radio from 4.9 to 6 GHz for Low-Density Areas | |
Microwave Backhaul Radio Links
from Radwin
|
| The 5000L from RADWIN is a Point-to-Multipoint (PtMP) Radio that operates from 4.9 to 6 GHz. It is designed for low-density areas with few end users and delivers a throughput of up to 250 Mbps for 16 end users. This radio uses RADWIN’s unique air interface to ensure end-user SLA via CIR (Committed Information Rate) with fixed latency, and low Jitter. |
| |
Download Datasheet
Product Details | |
|
