| New RF and Microwave Products this Week . |
|
|
| Fixed Chip Attenuators for Military & Space Applications | |
Fixed Attenuator
from Smiths Interconnect
|
| The TSK WB2 Series from Smiths Interconnect are Fixed Chip Attenuators that operate from DC to 50 GHz. They are available in attenuation levels from 0 to 10 dB (step size of 1 dB), 15 dB, 20 dB, and 30 dB with an attenuation accuracy of ±0.5 dB. These attenuators push the boundaries of size, weight, and power in a cost-effective, easy to implement surface-mount or wire-bondable solution. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Powerfilm Chip Attenuators from DC to 8 GHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The PCAAF Series of fixed chip attenuators operate from DC to 8 GHz. These attenuators are available in a number of attenuation configurations from 0 to 20 dB. They consist of a laser trimmed distributed thin film element on an alumina ceramic substrate with a protective paint layer and solderable leads. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 50 W Space-Qualified Terminations from DC to 18 GHz | |
Termination
from Cinch Connectivity Solutions
|
| The SQT-0180 Series from Cinch Connectivity Solutions are QPS (Qualified Parts for Space) Terminations that operate from DC to 18 GHz. They can handle an average input power of 0.5 W and a peak power of 50 W. These 50-ohm terminations are designed to meet the space and military industry standards and are suitable for high-grade satellites, deep space explorations, and thermo-vacuum chamber testing applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 12.94 GHz Passive GaAs MMIC Lowpass Filter | |
Low Pass RF Filter
from Marki Microwave
|
| The MFLP-00006CH from Marki Microwave is a Passive GaAs Lowpass Filter MMIC with a center frequency of 12.94 GHz. It has a passband insertion loss of 0.5 dB and provides an out-of-band rejection of 48 dB. This filter is fabricated using passive GaAs MMIC technology that allows production of smaller filter constructions that replace larger form factor circuit boards. |
| |
Download Datasheet |
Product Details | |
|
|
|
| High Purity Signal Generators from 9 kHz to 54 GHz | |
Signal Generator
from AnaPico
|
| The APLC Series from Anapico are 1 to 4 channel high purity signal generators that operate from 9 kHz to 12.75, 20, 40 and 54 GHz. They are ideally suited for a wide range of applications, where good signal quality, accurate and wide output power ranges, and very stable phase coherence among all channels are required. |
| |
Download Datasheet |
Product Details | |
|
|
|
| USB-compatible, Synthesized Signal Generator from 10 to 20 GHz | |
Signal Generator
from Vaunix
|
| The Lab Brick LMS-203 is a USB-compatible, synthesized signal generator that covers a frequency range from 10 to 20 GHz. It delivers an output power of 10 dBm, a fast 100-microsecond switching time, and a fine 100 Hz frequency resolution. This signal generator requires no additional DC supply voltage and offers advanced features such as phase-continuous linear-frequency sweeping, internal/external 10 MHz reference, and optional pulse modulation. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Marki Microwave | | | |
|
|
| 8-Port USB Controlled Antenna Switch from 100 kHz to 8 GHz | |
RF Switch
from Signal Hound
|
| The RFS8 from Signal Hound is an 8-port antenna switch (SP8T) that operates from 100 kHz to 8 GHz. This absorptive USB-controlled solid-state switch has an ultra-fast switching speed and a rise/fall time of 100 ns. It is based on silicon-on-insulator (SOI) technology and can switch from LF all the way through 8 GHz and can also be used for pseudo-doppler direction-finding applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Active 2x Frequency Multiplier from 26.5 to 40 GHz | |
Frequency Multiplier
from HASCO Components
|
| The HWFM28-SF2X23 from HASCO Components is an Active 2x Frequency Multiplier that converts input frequencies from 13.25 – 20 GHz to output frequencies from 26.5 – 40 GHz. It provides an output power of more than 21 dBm and has spurious levels of -20 dBc. This multiplier delivers sufficient output power to drive RF components such as balanced mixers in up-converters and down-converters for transmitters and receivers. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 18 GHz Phase-Matched, High SFDR RF over Fiber system | |
RF Over Fiber Module
from RFOptic
|
| The HSFDR 18GHz from RFOptic is phase matched Multi-link RF over Fiber System with a frequency range of 0.1 to 18 GHz. Each of the RFoF links in this system comprises of a Tx unit with an optional low-noise pre-amplifier and an Rx unit with an optional post-amplifier. This multi-link RFoF system is phase matched up to 10° and is especially suitable for low signal wideband applications with a noise figure of less than 10 dB. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 5.5 W Two-stage GaN Power Amplifier from 27.5 to 31 GHz | |
RF Amplifier
from CML Microcircuits
|
| The CMX90A705 from CML Microcircuits is a Two-Stage GaN Power Amplifier that operates from 27.5 to 31 GHz. It delivers a saturated output power of 5.5 W (~37.4 dBm) with a small signal gain of 16.5 dB and PAE of 22%. This Ka-Band amplifier is fabricated using a state-of-the-art 0.15 µm gate length GaN-on-SiC process. It requires a DC supply of 22 to 28 V and consumes 860 mA of current. |
| |
Download Datasheet |
Product Details | |
|
|
|
| GaN Power Amplifier from 17.3 to 21.2 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-1730-2120-44 from ERZIA is a High-Power Amplifier (HPA) that operates from 17.3 to 21.2 GHz. It delivers a saturated output power of 43.5 dBm (~22.3 W) with a small signal gain of 50 dB. This GaN amplifier’s compact size and modularity make it suitable for a wide range of applications. It requires a DC supply of 24 V and consumes less than 170 W of power. |
| |
Download Datasheet |
Product Details | |
|
|
|
| GaN MMIC Power Amplifier from 13.75 to 14.5 GHz | |
RF Amplifier
from Qorvo
|
| The QPA1314 from Qorvo is a GaN MMIC Power Amplifier that operates from 13.75 to 14.5 GHz. It delivers a saturated output power of 47 dBm (55 W) and is fabricated on Qorvo's production 0.15 um GaN-on-SiC process (QGaN15). This amplifier is fully matched to 50 ohms with integrated DC blocking caps on both I/O ports. Its RF ports are DC coupled to the ground for optimum ESD performance. |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by Marki Microwave | | |
|
|
| 1.35 mm (female) to 1.35 mm (female) Straight Adapter from DC to 90 GHz | |
In Series RF Adapter
from Mini Circuits
|
| The 135F-135F+ from Mini-Circuits is a 1.35 mm (female) to 1.35 mm (female) Coaxial Adapter that operates from DC to 90 GHz. It has an insertion loss of less than 0.66 dB and a VSWR of better than 1.28:1. This straight adapter is available in a passivated stainless-steel package that measures 6.0 (Dia.) x 17.6 (L) mm and has an operating temperature range of -55°C to +100°C. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 200 W, Class A/AB Solid-State Power Amplifier from 18 to 26.5 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-1826G-200 from Advanced Amplifiers is a Solid-State Power Amplifier (SSPA) that operates from 18.0 to 26.5 GHz. It delivers a saturated output power of more than 200 W with more than 53 dB of gain. This SSPA has a Class A/AB linear design, offering high efficiency with excellent reliability and ruggedness. It has spurious levels of -20 dBc and harmonics of -30 dBc. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Handheld Cable and Antenna Analyzer from 5 kHz to 6 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The Site Master MS2089A from Anritsu is a Handheld Cable and Antenna Analyzer with a frequency range of 5 kHz to 6 GHz. It has cable and antenna spectrum analysis and monitoring capabilities that together offer a complete test solution for industry professionals. This cable analyzer has a dynamic range of more than 105 dB and a displayed average noise level (DANL) of -167 dBm with a sweep speed of 45 GHz/s. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 100 MHz Low Phase Noise OCXO Module | |
OCXO
from KVG Quartz Crystal Technology GmbH
|
| The O-22-ELPN-100M from KVG Quartz Crystal Technology is an OCXO Module that operates at 100 MHz. It provides a sine wave output with a phase noise of -190 dBc/Hz @ 1 MHz offset and has frequency stability of less than ± 10 ppb. The oscillator has a warm-up time of less than 5 minutes, requires a supply voltage of 12 V and a frequency control voltage from 0 to +10 V. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Compact Antenna Test Range from 18 to 330 GHz for OTA Measurements | |
Antenna Measurement System
from Milliwave Silicon Solutions
|
| The MBX32CTR from Millibox is a mmWave & sub-THz compact antenna test range that operates 18 to 330 GHz. It has been designed to fit on a 6-foot lab bench and measures 161 x 112 x 83 cm. This compact chamber is suitable for mmWave and sub-THz OTA measurement with a quiet zone of 150mm. The MBX32CTR test range includes an MBX32 chamber, a GIM04H-300E 2-axis positioner, a laser alignment system, a 300mm parabolic reflector, and a focus probe antenna. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Orthomode Transducers from 33 to 220 GHz for 5G/6G Test Applications | |
Orthomode Transducer
from Flann Microwave
|
| The Series 785 from Flann Microwave are Orthomode Transducers (OMTs) that operate from 33 to 220 GHz. They provide an isolation of 40 dB, have a cross-polarization of 35 dB, and an insertion loss of 1 dB. These OMTs are bi-directional that allow signals to be sent from, or received at, the rectangular ports via an antenna supporting dual polarization (at the common port). |
| |
Download Datasheet |
Product Details | |
|
|
|
| 32T32R Backhaul Radio from 3.55 to 3.7 GHz for 5G Applications | |
Microwave Backhaul Radio Links
from AGTGSS
|
| The 32TR mMIMO from AmpliTech Group True G Speed Services (AGTGSS) is a Backhaul Radio for the 5G-NR n78 band from 3.55 to 3.7 GHz. It has a bandwidth of 100 MHz and supports QPSK and QAM (16, 64, 256) modulation schemes. This radio can be networked to other devices using TDD duplex mode and integrates 32 transmit and receive antenna elements in a panel. |
| |
Download Datasheet |
Product Details | |
|
|
|
| SP4T Switch from 10 MHz to 8 GHz for 5G mMIMO Applications | |
RF Switch
from pSemi, A Murata Company
|
| The PE42447 from pSemi is an SP4T RF Switch that operates from 10 MHz to 8 GHz. It provides an insertion loss of less than 0.5 dB with an IIP3 of 85 dBm. This switch can handle an input power of 100 W and has a switching time of 1 microsecond. It is manufactured on pSemi’s patented UltraCMOS process and the combination of high-power handling, high linearity, and extremely low insertion loss makes this switch suitable for hybrid beamforming in wireless infrastructure. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Low Noise Driver Amplifier from 37 to 59 GHz | |
RF Amplifier
from Altum RF
|
| The ARF1208L5 from Altum RF is a Low Noise Driver Amplifier that operates from 37 to 59 GHz. It delivers a saturated output power of 19 dBm with a small signal gain of 28 dB and has a noise figure of 2.8 dB. This amplifier is pre-matched to 50 ohms, ESD protected and housed in a laminate package to simplify handling and assembly. It requires a DC voltage of 4 V and consumes 100 mA of current. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 4-Channel Software-Defined Radio from DC to 40 GHz | |
Software Defined Radio
from Per Vices
|
| The Calamine from Per Vices is a 4-Channel Software-Defined Radio (SDR) that operates from DC to 40 GHz. It has been designed for seamless reception and utilizes a modular design consisting of different circuit boards with each board connected using shielded high-speed cabling to support its operation. This SDR integrates four receive chains and each chain is integrated with a Texas Instruments’ dual-channel ADC16DX370 ADC, an RF front-end, and a microcontroller, power board, digital board, and timing block. |
| |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
