| New RF and Microwave Products this Week . |
|
|
| Microwave Spectrum Monitor Module from 9 kHz to 54 GHz | |
RF Spectrum Analyzer
from Anritsu
|
| The MS27200A from Anritsu is a Microwave Spectrum Monitor Module that operates from 9 kHz to 9/14/20/26.5/32/43.5/54 GHz. It uses the latest technologies to deliver accuracy and precision in measurements previously reserved only for benchtop instruments. This module consists of a real-time spectrum analyzer (RTSA) that has a measurement bandwidth of 110 MHz for capturing transient and continuous signals over a large bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 Channel System-in-Package Phased Array Module for 5G NR n257 Band | |
Beamforming IC
from ED2 Corp
|
| The ED2-0023 from ED2 Corp is a 4-Channel System-in-Package (SiP) Phased Array Module (PAM) that operates at 28 GHz in the 5G NR n257-Band. It consists of 2x2 radiating elements with the Renesas F5288 beamforming half-duplex transceiver. On the Tx side, this PAM delivers an output power of 14.5 dBm with a gain from 42-47.5 dB, while on the Rx side, it provides a gain of 18 dB and has a noise figure of 4.9 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Dual-Channel Bidirectional Amplifier from 2.2 to 2.5 GHz | |
RF Amplifier
from NuWaves RF Solutions
|
| The NW-BA-DUAL-S-50-C02-S01 from NuWaves RF Solutions is a 2x2 Dual-Channel Bidirectional Amplifier that operates from 2.2 to 2.5 GHz. On the Tx side, this amplifier delivers a saturated output power of 47 W with a gain of 17 dB while on the Rx side, it provides a gain of 12 dB and has a noise figure of 2.5 dB. This BDA is suitable for extending the range of communications and datalinks for ISR applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 dB Fixed Attenuator from DC to 110 GHz | |
Fixed Attenuator
from HYPERLABS
|
| The HL9429 from Hyperlabs is a Fixed Attenuator that operates from DC to 110 GHz. It provides an attenuation of 6 dB with an accuracy of ±1 dB. This ultra-broadband attenuator can handle a maximum input power of 24 dBm, has an amplitude match of ±0.5 dB, and a phase match of 5°. It is available in a module that measures 1.141 x 0.377 x 0.377 inches with 1.0 mm female/male connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface Mount Bandpass Filter with Passband from 24.25 to 27.5 GHz | |
Band Pass Filter
from Knowles
|
| The B259MC1S from Knowles is a Band Pass Filter with a passband from 24.25 to 27.50 GHz. It has a passband insertion loss of less than 4.0 dB and provides up to 65 dB of rejection below the passband and 60 dB of rejection above the passband. This BPF can handle an input power of up to 5 W and has a return loss of 15 dB. It is available in a surface mount package that measures 5.50 x 2.29 x 1.78 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bandpass Filter MMIC with Passband from 17.52 to 21.45 GHz | |
Band Pass Filter
from AmpliTech
|
| The AGM-011 from AmpliTech is a GaAs Bandpass Filter MMIC with a passband from 17.52 to 21.45 GHz. It has a passband insertion loss of less than 3.8 dB and provides a rejection of 30 dB at 12.58 and 27.77 GHz. The filter is available in a package that measures 1.00 x 0.75 x 0.10 mm and is suitable for use in communication systems, point-to-point radios, fiber optics, test equipment, and military & space applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Quantic Wenzel | | Multiplied Crystal Oscillators (MXOs) | | This line of ultra-low phase noise MXOs can be easily customized to any fixed frequency between 200 MHz and 12 GHz. Choose options such as phase locking (PLL) on some models to phase lock to an external reference such as a rubidium, cesium, GPS or OCXO standard. Click here to learn more. | | | |
|
|
| 500 W CW/Pulsed Solid State Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2026B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 2 to 6 GHz in CW or Pulse modes. It delivers an output power of more than 500 W with a gain of over 57 dB. The amplifier has a class A/AB linear design and built-in protection circuits with extensive monitoring features. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W GaN Solid State Power Amplifier from 0.7 to 6.0 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-700M6G-300 from Advanced Amplifiers is a GaN Solid State Power Amplifier that operates from 0.7 to 6.0 GHz. It delivers a saturated output power of 300 W and a power gain of over 53 dB with a power gain flatness of 4 dB p-p. This class AB linear amplifier has an input/output return loss of over 10 dB and a 2-tone intermodulation (IMD) of -30 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 180° Hybrid Coupler from 0.4 to 7.125 GHz | |
180 Degree Hybrid Coupler
from KRYTAR
|
| The 400407125 from KRYTAR is a 180° Hybrid Coupler that operates from 0.4 to 7.125 GHz. This 3dB coupler has an insertion loss of less than 2.9 dB and an isolation of more than 15 dB. It can handle an average input power of 20 W and a peak input power of 3 kW. This coupler has an amplitude imbalance of ± 0.7 dB and a phase imbalance of less than ± 10°. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low Profile Wirewound Chip Inductors from 0.5 to 13 nH | |
RF Inductor
from Coilcraft
|
| The 0201HT Series from Coilcraft are Low Profile Wirewound Chip Inductors with inductance values from 0.5 to 13 nH. They have higher Q and lower DCR than similarly sized thin-film inductors and are optimized for high-frequency impedance matching in applications such as cell phones, wearable devices, Wi-Fi, Bluetooth, GPS, and LTE/5G IoT networks. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 nH to 47 µH Wirewound Ferrite Bead Inductors | |
RF Inductor
from Wurth Elektronik
|
| The WE-RFI Series from Würth Elektronik are Wirewound Ferrite Bead Inductors that have inductance values from 20 nH to 47 µH. They have a Q-factor of 11 to 45 and are rated for 45 to 1910 mA of current. These inductors have impedance values ranging from 160 to 125000 Ohms at a self-resonant frequency of 30 to 7720 MHz and DC resistance values ranging from 25 to 14000 mOhms. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Quantic Wenzel | | |
|
|
| 40 GHz Benchtop Power Meter with Four USB Controlled Power Sensors | |
RF Power Meter & Sensor
from Boonton
|
| The PMX40 from Boonton is an RF Power Meter that operates from 4 kHz to 40 GHz. Its intuitive, multi-touch display enables fast configuration of up to four USB sensors as well as easy access to measurement and analysis tools, providing a standalone solution for capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7 GHz Wireless Connectivity Test Set for Wi-Fi 7 and Cellular 5G Networks | |
RF Test Set
from Keysight Technologies
|
| The E7515W from Keysight Technologies is a UXM Wireless Connectivity Test Platform. It has been designed to support Wi-Fi-to-Cellular internetworking testing of both Wi-Fi clients (STAs) and access points (APs) from 380 MHz to 7.125 GHz (frequency resolution of 1 Hz). This test platform adds support for Wi-Fi 7 testing and enables advanced Wi-Fi/cellular co-existence testing and unique testing of 5G fixed wireless access (FWA) devices. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Passive GaAs Equalizer MMIC from DC to 14 GHz | |
Gain Equalizer
from Marki Microwave
|
| The MEQ14-14ASM from Marki Microwave is a Passive GaAs Equalizer MMIC that operates from DC to 14 GHz. It has a positive gain slope with attenuation options of 3,6,10 dB. This passive equalizer has an insertion loss of less than 1.3 dB and provides a return loss of 29 dB. It has been designed to compensate for low-pass filtering effects in RF/microwave and high-speed digital systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Rack-Mount RF Shielded Test Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-1560-AE from RF Electronics is an RF Shielded Test Box that operates from 20 MHz to 12 GHz. It is designed and developed for WLAN (802.11a/b/g/n/ac/ax/be) and wireless device testing (Bluetooth, RFID, 3G, 5G FR1). This test box has an internal clear space dimension of 374 x 343 x 466 mm and includes thick RF-absorbing foam material that deadens standing waves and reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 Ohm GaAs Balun MMIC from 3 to 18 GHz | |
Balun
from mmTron Inc
|
| The TMC810-1D from mmTron is a GaAs Balun MMIC that operates from 3 to 18 GHz. It converts a balanced signal to an unbalanced signal with an impedance ratio of 1:2. This 50-ohm balun has a phase balance of 1° and an amplitude balance of 0.4 dB. It is fabricated using a GaAs technology and exhibits low-loss, tight gain, phase matching, and high-power handling capabilities. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 0.5 to 40 GHz | |
RF Amplifier
from Qualwave
|
| The QLA-500-40000-43-50 from Qualwave is a Low Noise Amplifier that operates from 0.5 to 40 GHz. It provides a small signal gain of 43 dB with a noise figure of less than 5 dB and has an output P1dB of 14 dBm. This LNA has a VSWR of 2.0:1 and spurious emission levels of less than -60 dBc. It requires a DC supply voltage of 12 V and consumes less than 350 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| F-Band Low-Noise Amplifier from 90 to 140 GHz | |
RF Amplifier
from AT Microwave
|
| The AT-LNA-90140-1605 from AT Microwave is a Low-Noise Amplifier that operates from 90 to 140 GHz. It provides a typical gain of 16 dB with a noise figure of less than 7 dB and has a saturated output power of -3 dBm. The LNA is fabricated using an InP-based MMIC technology, which ensures reliable and repeatable unit-to-unit results. |
| |
Download Datasheet
Product Details | |
|
|
|
| Reflective Silicon SP8T Switch from 100 MHz to 20 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5080 from Analog Devices is a Reflective Silicon SP8T Switch that operates from 100 MHz to 20 GHz. This switch can handle RF input power of up to 33 dBm and has an insertion loss of less than 2.0 dB. It has a rise/fall time of 15 ns, a switching ON/OFF time of 55 ns, and provides up to 50 dB of isolation. This switch requires a dual-supply voltage of +3.3 V and -3.3 V and consumes 220 µA (positive supply) and 580 µA (negative supply) of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated Tx/Rx Front-End Module for 3G/4G/5G Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58101-11 from Skyworks is a Front-End Module that covers 2G, 3G, 4G and 5G bands. It consists of a low-band 3G/4G/5G PA block, low-band and high-band 2G PA blocks, a silicon controller consisting of the MIPI RFFE interface, RF band switches, antenna switches, a bi-directional coupler, integrated filters for Bands 8, 12, 20, 26, 28A, and 29, and low noise amplifier (LNA). |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 Ohm Feed Thru Termination from DC to 1000 MHz | |
Termination
from Broadwave Technologies
|
| The 892-326-FTT from Broadwave Technologies is a Feed-Thru Termination that operates from DC to 1000 MHz. It can handle an average input power of 5 W and has a VSWR of less than 1.20:1. This termination has an impedance of 600 Ohms and is designed to match RF components with high-impedance test equipment such as an oscilloscope. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Single-Junction Cryogenic Circulator from 4 to 12 GHz | |
RF & Microwave Circulator
from Low Noise Factory
|
| The LNF-CIC4-12B from Low Noise Factory is a Single-Junction Cryogenic Circulator that operates from 4 to 12 GHz. It has an insertion loss of 0.3 dB with an isolation of 20 dB. This circulator can handle an input power of up to 1 W (~30 dBm). It has been designed to meet the strict requirements of ultra-low temperature physics research and has a gold-plated OFHC copper body to ensure minimum loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact Block Up-Converter from 27.5 to 30/31 GHz | |
Block Up Converter
from Mission Microwave
|
| The Ka-Band Javelin from Mission Microwave is a Block Upconverter (BUC) that converts input frequencies from 950 to 2000 MHz to output frequencies from 27.5 to 30/31 GHz. It delivers an output power of up to 50 W (~47 dBm) with a gain of more than 60 dB and has a phase noise of -102 dBc/Hz (@1 MHz offset). This BUC has an inbuilt variable attenuator with an attenuation range of 31 dB, adjustable in steps of 0.25 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 W, IP67-Rated Dual Triplexer from 1695 to 5925 MHz | |
Triplexer
from Microlab
|
| The BK-3104T from Microlab is a Dual Triplexer that operates from 1850 – 1995 MHz, 1695 – 2200 MHz and 2305 to 5925 MHz. It has been designed to allow efficient combining or splitting of standard cellular bands and shared bands such as PCS/AWS with WCS, 2.5/BRS, or C-Band for 5G carrier aggregation in DAS & small cells in a 2×2 MIMO format. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cross-Polarized 4-Port Base Station Antenna from 698 to 3980 MHz | |
Base Station Antenna
from JMA Wireless
|
| The MX04FFP665-01 from JMA Wireless is a 4-Port Base Station Antenna that operates from 698 to 3980 MHz. This ±45° antenna provides a gain of up to 18 dBi and has a VSWR of less than 1.5:1. It has a horizontal beamwidth of 65°, a vertical beamwidth of 5.4° to 20° and supports electrical downtilt from 0 to 14°. This antenna has fully integrated (iRETs) with independent RET control for low-band, mid-band, and CBRS/C-Band. |
| |
Download Datasheet
Product Details | |
|
