| Featured Products this Week . |
|
|
| 2-Port USB Controlled VNA from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SC5090 from Copper Mountain Technologies is a modular 2-port compact VNA for 2-path measurements that operates from 300 kHz to 9 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and a typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22). |
| |
Download Datasheet
Product Details | |
|
|
|
| 67 GHz Colour-Coded, Flexible Low-Profile Cable Assemblies | |
RF Cable Assembly
from Maury Microwave
|
| The Stability Plus™ Low Profile Cable Assemblies from Maury Microwave operate up to 67 GHz. They provide the same electrical performance as Maury Microwave’s ruggedized StabilityPlus™ cables, but with a more compact and flexible design. These cable assemblies have excellent phase and amplitude stability with flexure that enables highly reliable and repeatable measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| Silicon Dioxide Based Semi-Rigid Coaxial Cable Assemblies for Space Applications | |
RF Cable
from Times Microwave Systems
|
| The SiO2 Series from Times Microwave Systems are Silicon Dioxide based based Semi-Rigid cables that operate up to 64 GHz. These phase-stable cable assemblies are designed to operate at extreme temperatures and in high radiation environments making them ideal for use in Space. Compared to other cable types, SiO2 cables provide exceptionally low hysteresis, with phase and loss values returning to the same values at a given temperature even after extreme excursions. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| mm-Wave Directional Coupler from 6 to 40 GHz | |
Directional Coupler
from MECA
|
| The 765-20-23.000 from MECA is a 5G-ready mm-wave Directional Coupler that operates from 6 to 40 GHz (Covering the C to V Band). It has a coupling value of 20 dB and can handle up to 20 watts of average power. The coupler has an insertion loss of less than 1.3 dB and directivity of more than 12 dB. It is available in a module with 2.92mm (F) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W, GaN Power Amplifier MMIC from 16.5 to 21.5 GHz | |
RF Amplifier
from AmpliTech
|
| The AGMPA165215 from AmpliTech is a GaN HEMT Power Amplifier MMIC that operates from 16.5 to 21.5 GHz. It provides 20 dB of gain with a saturated output power of 35 dBm (~3.16 W) and has a PAE of 30 %. This GaN on SiC power amplifier requires a DC supply of +28 V and consumes 100 mA of current. It is available as a 50-ohm internally matched die that measures 2.4 x 1.8 x 0.1 mm and is ideal for point-to-point radio and K-Band SATCOM applications. |
| |
Product Details | |
|
|
|
|
|
| Cavity Bandpass Filter from 1.3 to 2.3 GHz | |
Band Pass Filter
from Quantic PMI (Planar Monolithics)
|
| The BPF-1D3G2D3G-SMT from Quantic PMI (Planar Monolithics) is a Bandpass Filter with a passband from 1.3 to 2.3 GHz. It has a passband insertion loss of less than 5 dB, provides more than 60 dBc of rejection both above and below the passband, and has a VSWR of 2.1:1. This BPF is available in a copper casing surface mount package with a silver plate at the bottom that measures 30 x 8 x 5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Fully-Integrated 77 GHz Radar Transceiver | |
Automotive Radar Chipset
from NXP Semiconductors
|
| The TEF810X is a fully integrated RFCMOS automotive radar transceiver that operates from 76 to 81 GHz. It has 3 transmit and 4 receiver channels and is optimized for Fast Chirp Modulation. The device has 2 GHz of bandwidth but can also support 4 GHz with chirp stitching. It supports cascading of 4 TEF810X devices and is ideal for applications including emergency braking, adaptive cruise control, blind-spot monitoring, cross-traffic alert and automated-parking. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1:2 Balanced-to-Unbalanced Transformer from 9.2 to 16.15 GHz | |
Balun
from TTM Technologies
|
| The X4BD130LTI from TTM Technologies is a Balanced-to-Unbalanced Transformer that operates from 9.2 to 16.15 GHz. It can handle a CW input power of 1 W, has an impedance ratio of 1:2, and an insertion loss of less than 1.0 dB. This Balun has an amplitude balance of ±1.0 dB and a phase balance of ±12°. It is designed specifically for Texas Instruments’ AFE7950 and ADC12DJ5200RF chipsets. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 869 MHz Low-loss SAW Notch Filter | |
Band Stop Filter
from RFM Integrated Device
|
| The SF2472E from RFM Integrated Device is a Notch Filter with center frequency of 869 MHz. It can handle an input power of up to 33 dBm in pass band and 15 dBm in stop band. The filter has an insertion loss of less than 2.9 dB and attenuation of 24 dB. It is available in an AEC-Q200 Qualified-surface mount package that measures 3.0 x 3.0 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 W GaN Power Amplifier from 27.5 to 31 GHz | |
RF Amplifier
from Nxbeam Inc
|
| The NPA2050-SM from Nxbeam is a GaN Power Amplifier (PA) that operates in the Ka-Band from 27.5 to 31 GHz. It delivers a saturated output power of 8 W with a gain of 23 dB and a power-added efficiency (PAE) of 28%. This PA requires a DC supply from 20 to 28 V and consumes less than 140 mA of current. It is available in a ceramic surface-mount package and is ideal for Ka-Band satellite communications, point-to-point/multi-point digital radios, and 5G infrastructure applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 Channel System-in-Package Phased Array Module for 5G NR n257 Band | |
Beamforming IC
from ED2 Corp
|
| The ED2-0023 from ED2 Corp is a 4-Channel System-in-Package (SiP) Phased Array Module (PAM) that operates at 28 GHz in the 5G NR n257-Band. It consists of 2x2 radiating elements with the Renesas F5288 beamforming half-duplex transceiver. On the Tx side, this PAM delivers an output power of 14.5 dBm with a gain of 42 dB from 42-47.5 dB, while on the Rx side, it provides a gain of 18 dB and has a noise figure of 4.9 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated RF Front-End Module for 3G, 4G, and 5G Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58105-31 from Skyworks Solutions is a Front-End Module (FEM) that is designed for 3G, 4G, and 5G mobile devices. This module consists of separate 3G/4G/5G power amplifier (PA) blocks operating in mid-bands (MB) and high-bands (HB), a silicon controller with MIPI RFFE interface, RF-band switches, bidirectional couplers, MB/HB antenna switches, and integrated filters for bands 1, 3, 34, 39, 40, and 41. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Integrated, Multi-Channel Software Defined Radios from 10 MHz to 6 GHz | |
Software Defined Radio
from Epiq Solutions
|
| The Matchstiq G-Series from Epiq Solutions are Software Defined Radios (SDRs) that operate from 10 MHz to 6 GHz. They have up to four channels for Tz/Rx, each with a channel bandwidth of up to 50 MHz. This series consists of the Matchstiq™ G20 and G40 SDRs, which utilize the Sidekiq™ NV100 as a fundamental component. The Matchstiq™ G20 incorporates a single Sidekiq™ NV100, a 2TB SSD, and an Nvidia Orin NX, enabling direct RF record, analysis, and playback. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W GaN-Based BUC/SSPA from 17.3 to 18.4 GHz | |
Block Up Converter
from TTI
|
| The GaN-DBS-SSPA-BUC-200W from TTI is a GaN SSPA/BUC that converts an input frequency of 950 MHz to 2050 MHz (IF) to an output frequency of 17.3 to 18.4 GHz (RF). It delivers a saturated output power of 53 dBm (~200 W) & a linear output power of 52 dBm (~158 W)with a gain of over 65 dB. This SSPA/BUC has a gain flatness of less than 4 dB p-p over the full band and a gain variation of ± 1.5 dB over the full operating range. |
| |
Download Datasheet
Product Details | |
|
|
|
| Block Up Converter from 13.75 to 14.5 GHz for Airborne Applications | |
Block Up Converter
from Communications & Power Industries
|
| The SB50UAA from Communications and Power Industries is a Block Up Converter (BUC) that converts input frequencies (IF) from 950 to 1700 MHz to output frequencies (RF) from 13.75 to 14.50 GHz. It delivers an output power of more than 50 W (~47 dBm) with a gain of over 68 dB. This BUC has spurious levels of -60 dBc and a phase noise of -92 dBc/Hz (at 100 kHz offset). It includes control interfaces such as Ethernet, Telnet, Web, and SNMP and features built-in fault diagnostic capabilities via remote monitoring. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged L1/L2-Band GPS Antennas with Integrated LNAs | |
GPS/GNSS Antenna
from Antcom Corporation
|
| The 2DG1215X-MNX-X-A Series from Antcom are GPS L1/L2 Antennas that operate at 1575.42 ± 12 MHz (L1) and 1227.60 ± 12 MHz (L2). They have RHCP polarization and a VSWR of less than 2.0:1. These antennas have an integrated low-noise amplifier (LNA) that delivers a P1dB of +13 dBm and has a noise figure of 3.5 dB. They can handle a CW input power of 1 W and support the M-code signal. |
| |
Download Datasheet
Product Details | |
|
|
|
| Direct RF 3U VPX Data Converter for High-Speed Connectivity Applications | |
RF Digitizer
from Mercury Systems
|
| The DRF3182 from Mercury Systems is a Data Converter that is designed to directly digitize RF signals in radar, communications, and electronic warfare systems. It eliminates the need to implement RF-to-IF down conversion prior to digitization. This converter combines excellent data capture capability with powerful processing from Intel’s 14 nm Intel Stratix 10 SoC FPGA, making it suitable for applications with size, weight, and power constraints. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaAs MMIC Frequency Doubler from 20 to 40 GHz | |
Frequency Multiplier
from Keysight Technologies
|
| The HMMC-5645 from Keysight Technologies is a GaAs MMIC Frequency Doubler that converts an input frequency from 10-20 GHz to an output frequency from 20-40 GHz (useable up to 50 GHz). It has a conversion efficiency of -12 dB which can remain flat over an input power range of 20 dB using the bias. This doubler is ideal for microwave radio, aerospace and defense, and instrumentation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Bit, 360° Digital Phase Shifter with 500 MHz Center Frequency | |
Digital Phase Shifter
from Sigatek
|
| The SFD500D10 from Sigatek is an 8-Bit Digital Phase Shifter that operates at 500 MHz. It provides a phase shift from 0 to 360° with an LSB of 1.4° and has a switching speed of 500 ns. This bi-directional phase shifter can handle an input power of up to 1 W (~30 dBm) and has an insertion loss of less than 5 dB. It has a TTL control bus that allows 256 discrete phase values and is controlled using a control voltage of 0/+5 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional 5G-NR Pole/Screw Mount Antenna from 617 to 5925 MHz | |
Antenna
from 2J Antennas
|
| The 2J7A83JB-B16J from 2J Antennas is a 5G NR Antenna that operates from 617-960 MHz, 1427-2690 MHz, 3300-5000 MHz, and 5150-5925 MHz. This linearly-polarized antenna provides a peak gain of 3.6 dBi with an efficiency of 56.3% and has a VSWR of 1.7:1. It can handle an input power of up to 35 W. This antenna supports 5G NR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, and 2G, providing backward compatibility with the existing networks. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.0 mm OSLT Calibration Kit from DC to 116.5 GHz | |
VNA Calibration Kit
from Spinner Group
|
| The BN 535742 from Spinner Group is an OSLT Calibration Kit with 1.0 mm plug and socket connectors that operates from DC to 116.5 GHz (resonance free up to 120 GHz). This kit consists of a 1.0 mm open-circuit plug, 1.0 mm open circuit socket, 1.0 mm short circuit plug, 1.0 mm short circuit socket, 1.0 mm load plug, 1.0 mm load socket, 1.0 mm through plug/plug, 1.0 mm through socket/socket, 1.0 mm through plug/socket, torque wrench 6 mm/45 N-cm, torque wrench 6 mm/34 N-cm, and a double open-ended spanner (7 mm). |
| |
Download Datasheet
Product Details | |
|
