PREV 13th June, 2018 NEXT

New RF & Microwave Products this Week

13 June, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 13 June, 2018
 
Sponsored by Digi-Key
 
 
 
Interesting Products at IMS 2018
Vector Network Analyzer
300 kHz to 26.5 GHz USB-Controlled Compact Vector Network Analyzers

Vector Network Analyzer from Keysight Technologies

The P937xA are USB-Controlled Compact Vector Network Analyzers from Keysight that operate from 300 kHz to 26.5 GHz with six frequency breaks. Controlled via PC through a USB connection, these VNA's help customers save space on the test bench and are easily shared among members of a development team. The small rack size makes them ideal for manual or semi-automated testing in design-validation and light-manufacturing applications.
 
Download Datasheet | Product Details
 
RF Transceiver
Single RF Transceiver for 2G/3G/4G/5G Applications

RF Transceiver from Analog Devices

The ADRV9009 is a highly integrated RF transceiver that supports all existing cellular standards and is tunable over a range of 75 MHz to 6 GHz. The 200 MHz bandwidth IC has integrated dual transmitters and receivers, integrated synthesizers, and digital signal processing functions. The device can be powered directly from 1.3 V and 1.8 V regulators and is controlled via a standard 4 wire serial port.
 
Download Datasheet | Product Details
 
Front End Module
26 GHz Quad Core Silicon IC for 5G Phased Array Applications

Front End Module from Anokiwave

The AWMF-0139 from Anokiwave is a highly integrated silicon quad core IC for 5G phased array applications. The chipset has been developed for the 26 GHz 5G band and operates from 24.25 to 27.5 GHz. The device supports four Tx/Rx radiating elements, includes all requisite beam steering controls for phase and gain control, and operates in half duplex fashion to enable a single antenna to support both Tx and Rx operation.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
50 GHz Digital Step Attenuator for 5G mm-Wave Applications

RF Variable Attenuator from pSemi

The PE43508 from pSemi is a 6-bit, 50-ohm Digital Step Attenuator that operates from 9 kHz to 50 GHz. It has a 31.5 dB attenuation range in 0.5 dB and 1 dB steps. This high-performance DSA features low insertion loss, fast switching time and low attenuation error. It is available as a flip-chip, monolithic die, and is ideal for mmWave applications including 5G test and measurement, 5G wireless infrastructure, point-to-point communication systems and very small aperture terminals (VSAT).
 
Download Datasheet | Product Details
 
Power Divider
16-way Power Divider from 0.8 to 3 GHz

Power Divider from MECA

The 816-S-1.900-M01 from MECA is a 16-way power divider that operates from 0.8 to 3 GHz. This power divider can handle up to 20 watts of power, has an insertion loss of 1.5 dB and isolation over 20 dB. It is available in a module with SMA-female connectors.
 
Download Datasheet | Product Details
 
Band Pass Filter
Multilayer Organic Band Pass Filters from 620 to 5930 MHz

Band Pass Filter from AVX Corporation

The BP Series from AVX Corporation are Multilayer Organic Band-Pass Filters that support 18 pass bands from 620 to 5930 MHz and have an ultralow profile of less than 0.556 mm. The series exhibits a low insertion loss of below 2.41 dB, low parasitics, 50 Ohm impedance and excellent rejection of out-of-band frequencies. These filters are rated for 1W continuous RF power and are based on AVX’s patented and proven multilayer organic (MLO®) high-density interconnect technology.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
ADGM1004
ADI ADGM1004/ADGM1304 SP4T MEMS Switches with Integrated Driver
The ADGM1004/ADGM1304 wideband, SP4T switches use ADI MEMS switch technology. This technology enables a small, wide bandwidth, highly linear, low insertion loss switch that is operational down to 0 Hz/DC, making it an ideal switching solution for a wide range of RF applications. Click here to learn more.
 
 
 
Front End Module
2.4 GHz BLE/802.15.4/Zigbee Front-End Module

Front End Module from Skyworks

The SKY66114-11 from Skyworks is a 2.4 GHz fully-integrated RF front-end module that supports Bluetooth Low Energy/Bluetooth Smart, 802.15.4 and ZigBee applications. The module has an integrated high-efficiency saturated PA, high-gain LNA, Tx/Rx and bypass switches, and digital controls compatible with 1.6 V to 3.6 V CMOS levels.
 
Download Datasheet | Product Details
 
RF Transistor
140 Watt LDMOS RF Transistor from 400 to 860 MHz

RF Transistor from Ampleon

The BLF989 is an LDMOS RF Power Transistor from Ampleon that operates from 400 to 860 MHz. It has been built on Ampleons's Gen9HV high voltage LDMOS process. The device provides up to 140 watts of avg. power and up to 700 Watts of peak power with a gain of 21 dB and efficiency of 34%.
 
Product Details
 
RF Cable Assembly
1.85 mm Cable Assemblies up to 67 GHz for 5G Test & Measurement

RF Cable Assembly from Junkosha

The MWX061 from Junkosha is a cable assembly that operates up to 67 GHz. It has been designed to meet the higher frequency demands of tomorrow’s 5G networks. Available with ruggedized NMD connector assemblies to deliver reliable and robust connections to the VNA, this new interconnect solution hs been created to withstand the most rigorous of testing environments for periods of approximately three and a half years.
 
Download Datasheet | Product Details
 
RF Cable
DC to 50 GHz Flexible VNA Test Port Extension Cables

RF Cable from MegaPhase

The High Performance VN Series Cables from MegaPhase are VNA Test Port Extension Cables that operate up to 50 GHz. These VNA cables are designed to ease the time associated with test equipment calibrations where compensation for loss, mismatches, and feedthroughs are critical to the test outcome. The VN series cables are mechanically stable and can be bent with minimal effect on insertion loss, phase or VSWR.
 
Download Datasheet | Product Details
 
RF Amplifier
5 Watt, RF LDMOS Amplifier from 1400 to 2200 MHz

RF Amplifier from NXP Semiconductors

The A3I20D040WN from NXP is an RF LDMOS amplifier that operates from from 1400 to 2200 MHz. This multi-stage structure provides 5 watts of power with an efficiency of 18.8% and a gain of over 30 dB. It requires a 28 V supply and covers all typical cellular base station modulation formats. The amplifier is matched to 50 ohms with DC blocking at the input and output ports. It is available in a surface mount plastic package.
 
Download Datasheet | Product Details
 
RF Amplifier
40 Watt, 6 to 18 GHz Solid State Amplifier

RF Amplifier from AR RF/Microwave Instrumentation

The Model 40S6G18-L from AR RF/Microwave Instrumentation is a portable, self contained, liquid-cooled, broadband, Class A solid-state amplifier that operates from 6 to 18 GHz. This amplifier provides an output power of 40 watts with a power gain of 46 dB. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
 
 
 
RF Transceiver
Wideband Microwave Transceiver from 6 to 18 GHz

RF Transceiver from Mercury Systems

The SpectrumSeries RFM3101 from Mercury Systems is an ultra-wideband microwave transceiver with a versatile local oscillator (LO), low-phase noise and fast tuning speed. This OpenVPX™ and OpenRFM™ architecture compliant tranceiver operates from 6 to 18 GHz with 1 GHz of instantaneous bandwidth.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
High Performance VNA's from 70 kHz to 70 GHz

Vector Network Analyzer from Anritsu

The VectorStar family is Anritsu's Premium VNA product line that offers the excellent coverage in a single instrument, 70 kHz to 70 GHz. The Anritsu MS4640B Vector Network Analyzer offers a new level of performance for device modeling engineers struggling to accurately and reliably characterize their devices, for R&D engineers pushing the last fraction of a dB out of their state-of-the-art designs, and for the manufacturing engineer trying to maximize throughput without sacrificing accuracy.
 
Download Datasheet | Product Details
 
Termination
1 Watt AlN Chip Termination from DC to 44 GHz

Termination from Barry Industries

The TS0808ZZ-50R0JN-2S from Barry Industries is an AlN chip termination that operates from DC to 44 GHz. It can handle up to 1 Watt of power and has a return loss of better than 20 dB. The chip is available with a standard impedance value of 50 ohms. These terminations are available in a tape & reel or waffle pack for assembly/mass production.
 
Download Datasheet | Product Details
 
Band Pass Filter
5.2 GHz Co-Existence BAW RF Filter for Wi-Fi Applications

Band Pass Filter from Akoustis

The AKF-1252 from Akoustis is a 5.2 GHz co-existence BAW RF filter for Wi-Fi applications. Covering both U-NII-1 and U-NII-2A pass-bands, it delivers a low insertion loss of under 2 dB with a high rejection of over 50 dB and can handle an input power of up to 32 dBm. The filter is available in an ultra-small module that measures 2 x 2.5 x 0.9 mm and operates over a temperature range of -40 to 85 degree celcius.
 
Product Details
 
RF Amplifier
2.3 W Ka-Band GaAs Power Amplifier from 27 to 31 GHz

RF Amplifier from MACOM

The MAAP-011298 from MACOM is Ka-band GaAs power amplifier that operates from 27 to 31 GHz. This amplifier delivers an output power of 2.3 W and a gain of 24.5 dB with a power added efficiency of 26%. It is available in a 5x5mm AQFN-32 LD package and is ideal for SATCOM and VSAT applications requiring uncompromising high-speed connectivity, efficiency and reliability.
 
Download Datasheet | Product Details
 
Laminate
Low Loss High Impedance Laminates

Laminate from Rogers Corporation

The MAGTREX 555 from Rogers are high impedance laminates that enable antenna designers to miniaturize VHF and UHF antennas while maintaining the bandwidth achieved in a larger design. These laminates feature a closely matched X/Y axis permeability and permittivity of six and six and a half respectively, along with low magnetic and dielectric loss below 500 MHz. MAGTREX 555 laminates are based on a ceramic / PTFE composite system, manufactured in a process similar to Rogers Corporation’s popular RT/duroid® laminates.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is the largest database of RF & Microwave products. We list over 100,000 Products from more than 500 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]