PREV
18th June, 2018
NEXT
Latest News & White Papers this Week
18 June, 2018 - everything RF Newsletter| Sponsored by Copper Mountain Technologies | | | | | | | | |
|
|
| Sponsored by Copper Mountain Technologies | | | | | | | | |
|
|
| New RF Products Showcased at IMS 2018 |
|
|
| | E-band Transceiver for high-speed Mobile Backhaul Networks | RF Transceiver from Filtronic | | The Orpheus from Filtronic is a high performance ODU-Ready E-Band Transceiver with fully integrated 71-76 GHz and 81-86 GHz modules. It has been developed as a turn-key solution for ultra-high capacity macro cell backhaul and fronthaul for C-RAN (Centralized Radio Access networks). Each module contains all the transmit and receive functions necessary for the RF section of an E-band link and provides a simple connection to a high data rate full duplex modem. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 55 MHz to 15 GHz Frequency Synthesizer with Integrated VCO | Frequency Synthesizer from Analog Devices | | The ADF5610 from ADI is a frequency synthesizer consisting of a phase-locked loop (PLL) with a fully integrated voltage controlled oscillator (VCO) as well as integrated low dropout regulators (LDOs) and integrated tracking filter technology. It operates from 55 MHz to 15 GHz and has been developed for RF/microwave system designs that must meet the most exacting next-generation requirements across multiple markets, including military, test/measurement, communications infrastructure, as well as high-speed converter clocking. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 5 to 44 GHz Power Detector with 30 dB Dynamic Range | RF Detector from MACOM | | The MADT-011000 is a single-ended, internally-matched power detector that operates from 5 to 44 GHz and has a detection range from -15 dBm to 15 dBm (30 dB dynamic range). The detector consumes 70 ÁA of current from a 4.5 V supply. It is available in a 3 mm 16-lead QFN package and is well suited for power control in microwave radios, test and measurement equipment, and radar applications. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 12 dB, 2-Bit Digital Attenuator from DC to 40 GHz | RF Variable Attenuator from Custom MMIC | | The CMD282 from Custom MMIC is a 2-bit Digital Attenuator that operates from DC to 40 GHz. Each bit of the attenuator is controlled by a single voltage of either 0 V or –5 V. The attenuator bit values are 4 dB and 8 dB, for a total attenuation of 12 dB. The CMD282 has a low insertion loss of 1.5 dB at 18 GHz and the attenuation accuracy is typically 0.1 dB step error. It is matched to 50 ohms and is available as a die that offers full passivation for increased reliability and moisture protection. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | Noise Source from 26.5 to 40 GHz | Noise Source from NoiseWave | | The NW26.5G40-W from Noisecom is a noise source that operates from 26.5 to 40 GHz. It has a high ENR of >15 dB with a flatness of ± 0.75 dB. It requires a supply voltage of +28 V and draws 30 mA of current. The NW26.5G40-W is ideal for use in Noise figure measurement, millimeter wave radiometers, automotive radar as well as research and development in modern high frequency broadband wireless communication systems. It is available in a module with WR-28 waveguide interface at the output. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| Sponsored by Copper Mountain Technologies | | | | | | | | |
|
|
| About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide the most comprehensive industry news coverage, information on new product releases, new white papers and much more. |
|
|
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
