PREV 27th June, 2018 NEXT

New RF & Microwave Products this Week

27 June, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 27 June, 2018
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
Signal Generator
100 kHz to 12 GHz RF/Analog Signal Generator Module

Signal Generator from Tabor Electronics

The LS1291M from Tabor is a Single Channel RF/Analog Signal Generator that operates from 100 kHz to 12 GHz. It can provide a frequency resolution of 0.001 Hz and an output power range from -20 to 15 dBm (Options to -90 dBm available). This modular signal generator supports AM, FM, PM Sweep & Pulse Modulation.
 
Download Datasheet | Product Details
 
Signal Generator
8 kHz to 1 GHz, 3 GHz or 6 GHz RF Signal Generator

Signal Generator from Rohde & Schwarz

The R&S SMB100B is a compact analog signal generator available in various frequency options from 8 kHz to 1 GHz, 3 GHz and 6 GHz. The generator can deliver up to 34 dBm of output power (at 1 GHz carrier frequency) without an external amplifier. It provides an outstanding single sideband (SSB) phase noise of < -134 dBc (meas.) at 1 GHz and an offset of 20 kHz.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
USB Programmable Digital Attenuator from 10 MHz to 13 GHz

RF Variable Attenuator from Vaunix

The LDA-133 Digital Attenuator from Vaunix is a bidirectional, 50 Ohm step attenuator that operates from 10 MHz to 13 GHz. It has a step size of 0.5 dB and 63 dB of control range with reliable and repeatable solid state digital attenuation. This lab brick can handle up to 2 Watts of input power. The power and control connection is from a standard USB type-B female.
 
Download Datasheet | Product Details
 
RF Amplifier
200 Watt GaN SSPA from 200 to 2500 MHz

RF Amplifier from Aethercomm

The SSPA 0.2-2.5-200 from Aethercomm is a high power GaN solid state power amplifier that operates from 0.2 to 2.5 GHz. It provides a nominal output power of 200 watts with a small signal gain of 60 dB and a power added efficiency 35-50% (CW conditions). It requires a 50 V supply voltage for operation. This SSPA can be blanked on and off in less than 10 uSec. Standard features include reverse polarity protection, output short and open circuit protection, and over/under voltage protection.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Armored Test Cables Assemblies up to 50 GHz

RF Cable Assembly from MegaPhase

The SiteLine Series from MegaPhase are Armored Test Cables that operate up to 50 GHz. They provide maximum flexibility and are jacketed with a highly weather resistant outer cover. The cables are designed for severe environments, such as flightline, outdoor antenna testing, and on-site field testing using portable network analyzers.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-1160 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. The test box has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for powering devices placed inside the box while blocking all wireless signals. The HDRF-1160 has a number of I/O connector options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
Murata WSM-BL241
Mouser Stocking RF-Certified Bluetooth 5 Solution for IoT Development.
Murata WSM-BL241 Bluetooth® 5 Low Energy (BLE) Module integrates a Nordic BLE IC, RF front-end and crystal in a small form factor. This 2.4GHz, BLE, ANT and NFC tag module enables ultra-low power connectivity for data communication, offering an ideal solution for developing IoT applications. Click here to learn more.
 
 
 
RF Amplifier
100 Watt Solid State Power Amplifier from 20 to 520 MHz

RF Amplifier from KeyLink Microwave

The KL002052M50A from KeyLink Microwave is a high power amplifier module that operates from 20 to 520 MHz. This amplifier provides an output power of 100 Watts with a gain of 50 dB. It is available in a module that measures 180 x 90 x 27 mm with SMA female connectors. The amplifier is matched to 50 ohms at the input/output and has built-in control and protection circuits.
 
Download Datasheet | Product Details
 
RF Amplifier
Solid State GaAs Amplifier System from 26.5 to 40 GHz

RF Amplifier from Exodus Advanced Communications

The AMP4066 from Exodus Advanced Communications is a solid state GaAs amplifier system that operates from 26.5 to 40 GHz. It delivers an output power of more than 40 watts with a gain of over 46 dB and has a return loss of under 10 dB. The amplifier has a wide instantaneous bandwidth and is suitable for all single channel modulation standards.
 
Download Datasheet | Product Details
 
RF & Microwave Circulator
700 to 800 MHz, 250 W Coaxial Circulator

RF & Microwave Circulator from MECA

The CN-0.750 from MECA is an RF Circulator that operates from 700 to 800 MHz. It can handle up to 250 watts of average power and up to 2000 watts of peak power. The isolator has an insertion loss of 0.5 dB and provides an isolation of over 17 dB. It is available in an IP-67 module with N-Type Female connectors and can ship from STOCK to 4 weeks after receipt of your order.
 
Download Datasheet | Product Details
 
RF Amplifier
500 W C-Band Outdoor GaN SSPA

RF Amplifier from Teledyne Paradise Datacom

The HPAC2500ACXXXXG from Teledyne is a compact outdoor solid state power amplifier (SSPA) that operates in the C-band (4 to 8 GHz). This SSPA has an integrated forced-air cooling system built for extreme environmental conditions and high reliability operation. It provides an output power of 500 W, linear power of over 250 W and a gain of 20 dB. The amplifier is available in a module that measures 19.5 x 10.0 x 6.5 inches and has built-in 1:1 redundancy control.
 
Download Datasheet | Product Details
 
In Series RF Adapter
Hermetically sealed TNC Jack to TNC Jack RF Adapters

In Series RF Adapter from Jyebao

The AD-T8T8-BF-18/HS from Jyebao is a hermetically sealed TNC jack to TNC jack RF adapter that operates up to 18 GHz. It has a VSWR of up to 1.20:1 and is matched to 50 ohms. The adapter has a brass body with a Beryllium Copper contact pin.
 
Download Datasheet | Product Details
 
RF Transceiver
Sub-GHz Long Range Low Power LoRa® Transceiver

RF Transceiver from Semtech

The SX1262 from Semtech is a sub-GHz Low Power Long Range LoRa® RF Transceiver for a wide range of wireless applications. The device has an Rx sensitivity of up to -148 dBm and can transmit up to +22 dBm of power. It has low Rx current consumption of 4.2 mA making it ideal for battery powered applications.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
Wireless SoC
Ultra-Low-Power Bluetooth 5 SoC for Automotive Industry

Wireless SoC from ON Semiconductor

The NCV-RSL10 from ON Semiconductor is an Ultra-low-power Bluetooth 5 certified SoC for the Automotive Industry that supports data rates of up to 2 Mbps. This ultra-low power SoC requires a supply voltage of 1.1 to 3.6 V and draws 4.3 mA of current in transmit mode and 2.7 mA in receive mode. It has a receive sensitivity of -94 dBm and can transmit a power from -17 to 6 dBm.
 
Download Datasheet | Product Details
 
RF Amplifier
GNSS Low-Noise Amplifier

RF Amplifier from Maxim Integrated

The MAX2659 from Maxim Integrated is a GPS/GNSS Low-Noise Amplifier designed for GPS, Galileo, and GLONASS applications. It provides a high gain of 20.5 dB and low noise figure of 0.8 dB while operating from a 1.6 V to 3.3 V single supply. The device has a shutdown feature that reduces the supply current to less than 1 µA.
 
Download Datasheet | Product Details
 
Band Pass Filter
8000 MHz LC Bandpass Filter

Band Pass Filter from Networks International Corporation

The C-1270 from NIC is a LC Band Pass Filter with a center frequency of 8000 MHz and bandwidth of 4100 MHz. The filter has an insertion loss of under 2 dB and more than 50 dBc of rejection above and below the passband. It is available in a surface mount non-hermetic package that measures 0.9 x 0.3 x 0.1 inches.
 
Download Datasheet | Product Details
 
Directional Coupler
30 dB,Directional Coupler from 7 to 12 GHz

Directional Coupler from Electro-Photonics LLC

The EPD9500-30-SMA from Electro-Photonics is a 30 dB Directional Coupler that operates from 7 to 12 GHz. The coupler can handle up to 50 W of power with a low insertion loss of 0.4 dB and high directivity. It can be used in a wide range of applications including power monitoring, Military communication, SATCOM, Test and Measurement and a number of other applications.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
Carrier Grade 24 GHz Unlicensed Microwave Backhaul Radio

Microwave Backhaul Radio Links from Proxim

Tsunami GX-824 from Proxim Wireless is an outdoor unlicensed point-to-point (PtP) microwave backhaul radio that operates in the 24 GHz band. It has a wide channel bandwidth of 3.5 to 112 MHz and supports modulation schemes up to 1024QAM. The radio provides a tranmit power of -27 to 5 dBm while operating over a 48 V supply.
 
Download Datasheet | Product Details
 
Antenna
2.3 to 2.7 GHz Base Station Sector Antennas with +/- 45 Degree Slant

Antenna from KP Performance Antennas

The KPPA-3GHZDP90S-45 is a Base Station antenna from KP Performance that operates from 2.3 to 2.7 GHz. It provides 17 dBi of gain and has a vertical beamwidth of 7.4 degrees and a horizontal beamwidth of 90 degrees. The antenna has Dual Polarization and has been specifically designed for customers deploying +/-45 degree slant radios in WISP and LTE networks.
 
Download Datasheet | Product Details
 
Block Up Converter
10 Watt Block Up Converter from 17.3 to 18.4 GHz

Block Up Converter from Actox

The ABE10UDBS from Actox is a Block Up Converter which upconverts an input frequency from 950 MHz to 1700 MHz to an RF frequency from 17.3 to 18.4 GHz. The BUC delivers an output power of 10 watts with a small signal gain of 68 dB. It works on a wide range of supply voltages from 15 V to 60 V, while consuming up to 65 W of power.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave product releases. We provide scan over 1000 manufacturer websites to identify the latest product releases every day. Our newsletter are a summary of new product releases every week.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]