everything RF Newsletter Index

more

25 June, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

Date: 25 June, 2018

Largest Directory of PCB Suppliers

Latest News this Week

Researchers Develop World's First 300 GHz IC to Enable Wireless Data Rates of 100 Gbps - NTT Group

R&S Unveils Compact Analog & Vector Signal Generators up to 6 GHz - Rohde & Schwarz

Sharp Develops Transparent NFC Antennas which can be Integrated into Video Displays - Sharp Japan

NASA Has a Deep Space Communications Hub in the Desert - NASA

Scientists Develop 28-GHz Transceiver for Next-Gen 5G Devices and High-speed Communications - Tokyo Institute of Technology

Over-the-Air Integrated Test Solution for Antenna in Package (AiP) 5G, Auto Radar, and WiFi Devices - Multitest

NI Expands RFIC Test Capability to NB-IoT and eMTC Standards - National Instruments

Fraunhofer IIS Develops IoT Sensors that Directly Transmit Data to GEO Satellites - Fraunhofer

Lithuanian Scientists Develop Indoor Positioning System Using Wi-Fi Network - KTU

MIT Engineers Configure RFID Tags to Detect Chemicals in the Atmosphere - MIT

Copper Mountain Technologies Introduces Compact USB VNA from 100 kHz to 18 GHz - Copper Mountain Technologies

New White Papers

Making the Right Choices When Specifying an RF Switching System - Pickering Interfaces

What are the advantages of GaN on Silicon for MMICs? - MACOM

Doherty Architectures in UHF - Ampleon

Industrial heating applications look to solid-state devices to improve reliability and effectiveness, and save space - Ampleon

Introduction into Theory of Direction Finding - Rohde & Schwarz

More White Papers

Upcoming Event

Event Image

Date: 30 July to 3 August 2018

Location: Long Beach, CA

Featured Products this Week

RF Shielded Test Enclosure

RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-2124-T from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for providing power connection in the box while blocking all wireless signals.

Download Datasheet | Product Details

RF Amplifier

50 W Power Amplifier Module from 0.8 to 4.2 GHz

RF Amplifier from KeyLink Microwave

The KB0842M47A from KeyLink Microwave is a multi-octave high power amplifier module that operates from 0.8 to 4.2 GHz. This GaN Amplifier provides a saturated output power of 50 Watts with a gain of 47 dB. It is available in a module that measures 150 x 90 x 25 mm with SMA female connectors and is ideal for RF, L/S linear applications. The rugged amplifier has built-in control and protection circuits.

Download Datasheet | Product Details

RF & Microwave Isolator

27 to 31 GHz, 2 Watts Coaxial Isolator

RF & Microwave Isolator from MECA

The IK-29.000 from MECA is a coaxial isolator that operates from 27 to 31 GHz. It has an insertion loss of 0.5 dB and provides an isolation of over 20 dB. The isolator can handle up to 2 watts of average power and up to 30 watts of peak power. The isolator has 2.92 mm female stainless steel connectors.

Download Datasheet | Product Details

RF Cable Assembly

Ultra Flexible and Rugged Test Cable from DC to 32 GHz

RF Cable Assembly from MegaPhase

The Killer Bee from MegaPhase is an ultra flexible and rugged test cable that can be used from DC to 32 GHz. This light-weight test cable provides a long service life with superior phase and amplitude stability performance through the life of the cable. It is ideal for lab, production and thermal testing applications over a temperature range from -50 to 150 Celsius. A wide variety of connectors are available for use with this cable.

Download Datasheet | Product Details

RF Amplifier

15 Watts, GaN Power Amplifier from 0.7 to 6 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1002BLW from Exodus Advanced Communications is a solid state GaN amplifier that operates from 0.7 to 6 GHz. The amplifier provides up to 15 watts of saturated power with a gain of 42 dB. It requires a 28-30 V supply and has built-in protection circuits. The amplifier supports most single channel modulation standards and is available in a small, ultra-lightweight, rugged package.

Download Datasheet | Product Details

RF Transistor

60 Watt LDMOS Transistor from 10 to 1000 MHz

RF Transistor from Ampleon

The BLP10H660P from Ampleon is an RF Power LDMOS Transistor that operates from HF (10 MHz) to 1000 MHz. This LDMOS Transistor provides 60 watts of power with 18 dB of gain and is ideal for broadcast and industrial applications. It has integrated dual sided ESD protection that enables class C operation and complete switch off of the transistor.

Download Datasheet | Product Details

RF Amplifier

Low Noise Amplifier from 18 to 40 GHz

RF Amplifier from AmpliTech

The APT4-18004000-4008-D20 from AmpliTech is a low noise amplifier that operates from 18 to 40 GHz. It provides an output power of more than 8 dBm with a gain of 41 dB and has a noise figure of 3 dB. The amplifier is available in a module with SMA female connectors and is ideal for point-to-point radios, test equipment, military and space applications.

Download Datasheet | Product Details

RF Amplifier

90 Watt Hybrid Power Amplifier from 1 to 6 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 100HM1G6AB-50 from AR RF/Microwave Instrumentation is a compact hybrid amplifier that operates from 1 to 6 GHz. The amplifier provides an output power of 90 watts with a small signal gain of 64 dB and excellent flatness, noise figure and intermodulation distortion over the band. This power amplifier can be used by both military and commercial industries.

Download Datasheet | Product Details

In Series RF Adapter

Mitered SMA plug to SMA plug Adapter up to 18 GHz

In Series RF Adapter from Jyebao

The ALS-A3A3-18-1.15 from Jyebao is a Mitered SMA plug to SMA plug In-series right angle adapter that operates up to 18 GHz. It has a VSWR of up to 1.15:1 and is matched to 50 ohms. The adapter has a stainless steel body with a Beryllium Copper center contact and retainer ring.

Download Datasheet | Product Details

Front End Module

2.4 GHz, 1024 QAM WLAN Front-End Module

Front End Module from Skyworks

The SKY85337-11 from Skyworks is a 2.4 GHz 802.11 ax RF front end module that consists of a fully matched Power amplifier, power detector, low noise amplifier and a low noise amplifier. The FEM provides a complete Tx/Rx FE solution from the output of the transceiver to the antenna and from the antenna to the input of the transceiver.

Download Datasheet | Product Details

Power Divider

8-Way Power Divider from 0.5 to 2 GHz

Power Divider from Planar Monolithics Industries

The APD-8-500M2G-SFF-30W from PMI RF is an 8 way power divider that operates from 0.5 to 2 GHz. It can handle up to 30 watts of power and provides an insertion loss of 1.5 dB and an isolation of 20 dB between ports. The power divider has a low VSWR and is available in a module with SMA female connectors.

Download Datasheet | Product Details

RF Variable Attenuator

DC to 2500 MHz Dual Rotary Attenuator

RF Variable Attenuator from JFW Industries

The 50DR-046 from JFW Industries is a Dual Rotary Attenuator that operates from DC to 2500 MHz. This manual step attenuator has an attenuation range from 0 to 50 dB which can be adjusted in 1 dB steps using a small knob and 10 dB steps using the larger knob. It can handle up to 2 watts of power and is available with BNC, N or SMA connectors.

Download Datasheet | Product Details

Directional Coupler

6 to 30 dB Directional Couplers from 2 to 18 GHz

Directional Coupler from VidaRF

The VDC Series of Directional Couplers from VidaRF operate from 2 to 18 GHz. They have coupling values of 6, 10, 15, 16, 20 & 30 dB and can handle up to 50 Watts of average power. These couplers have an insertion loss of under 0.7 dB and a directivity of over 15 dB. They are available in an aluminum module with SMA connectors.

Download Datasheet | Product Details

RF Amplifier

Power Amplifier Module from 2 to 4 GHz

RF Amplifier from ERZIA

The ERZ-HPA-0200-0400-24 from ERZIA is a Power Amplifier that operates from 2 to 4 GHz. It provides an output power of up to 25 dBm with a small signal gain of 22 dB. The amplifier requires a supply voltage of 12 V. It is available in a compact gold plated aluminium housing with SMA female connectors. The compact size and modularity makes it ideal for a wide range of applications including satcom, telecom, space, aerospace and industrial.

Download Datasheet | Product Details

Power Sensor

1 MHz to 40 GHz True RMS Power Sensor

Power Sensor from LadyBug Technologies

The LB5940A is a high accuracy, platform independent RF Power Sensor that operates up to 40 GHz. This general purpose power meter can measure average power, True RMS and do scalar measurements. It has a fast measurement speed, a broad dynamic range and a wide set of options for programmatic and embedded applications.

Download Datasheet | Product Details

Phase Noise Analyzer

10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 26 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high performance RF Synthesizers as the test signal LOs. The HA7062C is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.

Download Datasheet | Product Details

RF Spectrum Analyzer

Real-Time Modular Benchtop Spectrum Analyzer from 9 kHz to 20 GHz

RF Spectrum Analyzer from Aaronia AG

The Spectran V5 Real Time Spectrum Analyzer from Aaronia is available as a benchtop device in four frequency configurations: 9 kHz to 6 GHz, 12 GHz, 16 GHz and 20 GHz. This analyzer has a real time analysis bandwidth that varies from 44 MHz in the 6 GHz model to 175 MHz in the 20 GHz model. The analyzer has a very fast sweep time that enables it to scan 20 GHz of spectrum in less than 20 m seconds.

Download Datasheet | Product Details

Vector Network Analyzer

4-Port USB Vector Network Analyzer, 100 kHz to 9 GHz

Vector Network Analyzer from Copper Mountain Technologies

The C4409 from Copper Mountain Technologies is a 4-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1 Hz IF BW), directivity of 46 dB and sweep speeds of 10 microseconds per point.

Download Datasheet | Product Details

Largest Directory of PCB Suppliers

About everything RF

everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news stories, white papers, products and information about industry upcoming events.

To unsubscribe please click here

[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]

Advertisement

Need Help Finding a Product?