PREV 4th July, 2018 NEXT

New RF & Microwave Products this Week

4 July, 2018 - everything RF Newsletter
 
everything RF
Date: 4 July, 2018
 
Largest Directory of PCB Suppliers
 
 
 
New RF & Microwave Products this Week
Fixed Attenuator
150 W BeO Flanged Attenuators from DC to 6 GHz

Fixed Attenuator from Barry Industries

The AXXXX-150-10Y Series from Barry Industries are BeO Flanged Attenuators that operate from DC to 6 GHz. The attenuators can be configured to have a fixed attenuation from 0 to 20 dB and can handle up to 150 W of input power. They are available in a flange mount package and operate over a temperature range from -55 to 150 degree Celsius.
 
Download Datasheet | Product Details
 
Waveguide Circulator
0.5 W Circulator from 71 to 76 GHz

Waveguide Circulator from HXI

The HMC12-387-73.5-5.0 is a ferrite based junction circulator that operates from 71 to 76 GHz. It has been designed for the matching and protecting E-band radios, radars and testing systems. The circulator provides an isolation of 19 dB, insertion loss of 0.6 dB and can handle up to 0.5 watts of power. It has a WR-12 waveguide interface with UG-387/U Flange.
 
Download Datasheet | Product Details
 
Gain Equalizer
Passive GaAs MMIC Equalizer from DC to 20 GHz

Gain Equalizer from Marki Microwave

The MEQ11-20ASM from Marki Microwave is a passive MMIC Gain Equalizer that operates from DC to 20 GHz. It provides a positive slope from DC to 20 GHz with an attenuation amplitude of 11 dB. It is available in a 3 x 3 mm QFN surface mount package and is ideal for compensating low pass filtering effects in RF/microwave and high-speed digital systems.
 
Download Datasheet | Product Details
 
Limiter
4 Watt Coaxial Limiter from 1 to 18 GHz

Limiter from Planar Monolithics Industries

The LM-1G18G-16-4W-SMF from PMI is a coaxial Limiter that operates from 1 to 18 GHz. It can handle 4 watts of CW power with a leakage of less than 40 mW and recovery time of below 250 ns. The limiter has a maximum insertion loss of 2.3 dB at -10 dBm input power, with a maximum VSWR of 2.0:1. It is available in a module that measures 22.86 x 9.65 x 9.65 mm with SMA connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Q-band Low Noise Amplifier from 38 to 42 GHz

RF Amplifier from L3 Narda-MITEQ

The JDM1-38004200-40-10P from L3 Narda-Miteq is a Q-band Low Noise Amplifier that operates from 38 to 42 GHz. The amplifier provides a P1dB of 10 dBm, a gain of more than 30 dB with a noise figure of less than 4 dB. It is available in a module with various I/O interface options and a dual DC power supply. This LNA is ideal for SATCOM, telecommunications, test instrumentation and transceiver subassembly applications.
 
Download Datasheet | Product Details
 
RF Amplifier
500 W C-Band Compact Outdoor SSPA

RF Amplifier from Teledyne Paradise Datacom

The HPAC2500ACXXXXG from Teledyne is a compact outdoor solid-state power amplifier (SSPA) that operates in the C-band (4 to 8 GHz). This SSPA has an integrated forced-air cooling system built for extreme environmental conditions and high-reliability operation. It provides an output power of 500 W, linear power of over 250 W and a gain of 20 dB.
 
Download Datasheet | Product Details
 
Largest Directory of PCB Suppliers
 
 
 
RF Amplifier
175 W Solid State Amplifier from 0.7 to 6 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 175S1G6 from AR RF/Microwave Instrumentation is a self-contained, air-cooled, broadband, solid state amplifier unit that operates from 0.7 to 6 GHz. This amplifier has been developed for applications where instantaneous bandwidth, high gain, and linearity are required. It provides more than 175 W of power when used with an RF sweep generator with a gain of over 54 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
4.4 to 5 GHz GaN Power Amplifier Module

RF Amplifier from Qorvo

The QPA4501 from Qorvo is an integrated 2-stage GaN Power Amplifier Module that operates from 4.4 to 5 GHz. It delivers an output power of 3 W and a gain of 32 dB with a PAE of 38%. The module is available in a surface mount 6 x 10 mm plastic package and is ideal for 5G massive MIMO, W-CDMA/LTE, Base station and avtive antenna applications.
 
Download Datasheet | Product Details
 
Front End Module
LTE Dual-Band Front-End Module for IoT Applications

Front End Module from Skyworks

The SKY68000-31 from Skyworks is a hybrid, dual-band multi-chip RF front-end (RFFE) module for LTE CAT0/CATM1/CATNB1 (half-duplex system) transceiver platforms. This module integrates the entire RF front end necessary for an LTE dual-band radio operating in Band 13 and Band 4 including Rx SAW filters, dual-band PA with bias controller, Tx low-pass harmonic filter, antenna switch, and MIPI RFFE controller.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
10 MHz to 20 GHz RF Synthesizer Module

Frequency Synthesizer from Holzworth Instrumentation

The HSM18001B from Holzworth Instrumentation is a RF synthesizer module that operates from 10 MHz to 20 GHz. This microwave CW source is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these digital-analog hybrid signal sources.
 
Download Datasheet | Product Details
 
RF Switch
SP3T PIN Diode Switch from 50 to 3000 MHz

RF Switch from RFuW Engineering

The MSW3T-3200-150 from RFuW Engineering is a SP3T PIN diode switch that operates from 50 to 3000 MHz. It has an insertion loss of under 0.5 dB and provides an IP3 of over 65 dBm. The switch can handle an average CW power of up to 100 W and a peak power of up to 200 W. It is available in a small surface mount package that measures 9 x 6 x 2.5 mm and is ideal for Radar T/R Modules, Switch Bank Filters and Mil-Com Radios.
 
Download Datasheet | Product Details
 
Power Divider
4-Way Power Divider from 0.5 to 18 GHz

Power Divider from MegaPhase

The PD36-4S-9.2G from MegaPhase is a 4-way Power Divider that operates from 0.5 to 18 GHz. It can handle up to 30 watts of power, has an insertion loss of under 4 dB and isolation over 16 dB. The power divider is available in a module with SMA connectors and is designed to meet MIL-DTL-23 971 standard.
 
Download Datasheet | Product Details
 
Featured Content
PLDRO
What is a PLDRO - Phase Locked Dielectric Resonator Oscillator?
A phase-locked dielectric resonator oscillator (PLDRO) is a type of oscillator that is used in millimeter-wave communication systems, where phase noise performance is of utmost importance. As wireless communication systems are advancing, the system manufacturers and service providers are all trying to transmit more data within the limited frequency resources available. Click here to learn more.
 
 
 
RF Amplifier
32 to 40 GHz, Solid State High Power Amplifier  (Featured)

RF Amplifier from Exodus Advanced Communications

The AMP4052 is a solid state GaAs power amplifier that operates from 32 to 42 GHz. It provides an output power of more than 10 watts with a gain of over 40 dB. This rack mount amplifier can be controlled via the front panel on the amplifier system. It is available in a rack mount unit that measures 430 x 112 x 560 mm with 2.9 mm female connectors and weighs 11 kg.
 
Download Datasheet | Product Details
 
Receiver
Integrated Dual RF Receiver Tunable from 75 MHz to 6 GHz

Receiver from Analog Devices

The ADRV9008-1 is a highly integrated, dual RF receiver (Rx) that is tunable over a range of 75 MHz to 6 GHz. The receive path consists of two independent 200 MHz bandwidth receivers, integrated synthesizers, and digital signal processing functions. It can be powered directly from 1.3 V and 1.8 V regulators and is controlled via a standard 4-wire serial port.
 
Download Datasheet | Product Details
 
RF Connector
1.85 mm Screw-on End Launch Connectors

RF Connector from Cinch Connectivity

The Johnson 1.85 mm series of connectors operate up to 67 GHz with a VSWR performance up to 1.20:1. These Screw-on End Launch connectors are designed for use in a variety of applications and markets while delivering superior signal integrity in the most demanding environments. They are easy to assemble and disassemble to a PCB, can be connected with solder or solderless, and adjustable to varying board thicknesses.
 
Download Datasheet | Product Details
 
Power Divider
30 W, 3 Way-Power divider from 0.5 to 6 GHz

Power Divider from MECA

The 803-4-3.250WWP from MECA is a 3-way power divider that operates from 0.5 to 6 GHz covering all ISM and Public Safety bands. It can handle up to 30 watts of power, has an insertion loss of under 1.6 dB and isolation over 16 dB. The power divider is available in a module with N-type Female Weatherproof connectors.
 
Download Datasheet | Product Details
 
RF Module
2.4 GHz RF Transceiver Modules with Bluetooth SMART Technology

RF Module from Anaren Inc

The A2541 series from Anaren are 2.4 GHz RF transceiver modules with Bluetooth SMART technology. These radio modules incorporate the Texas Instruments CC2541 SOC, either with a CC2590 Range Extender (A2541E24x) or without a range extender (A2541R24x). The modules are available in two variants - with an internal antenna (24A) or with a connector (24C) that accepts a U.FL monopole antenna.
 
Download Datasheet | Product Details
 
RF Module
802.15.4 + Bluetooth v5 + NFC Module

RF Module from Laird Technologies

The BL654 Series from Laird Technologies is a certified 802.15.4 + Bluetooth v5 + NFC module designed for beacons, Industrial monitoring, IoT devices and sensors applications. Based on Nordic's nRF52840 SoC, the module provides a data rate of up to 2 Mbps while operating over a frequency range of 2.402 to 2.480 GHz.
 
Download Datasheet | Product Details
 
RF Module
2.4/5 GHz WiFi + Bluetooth Module

RF Module from Compex Systems

The WSD377 from Compex is a 2.4/5 GHz WiFi + Bluetooth Module designed for WLAN/Bluetooth and Low-Energy communications. It is based on Qualcomm's Atheros QCA9377 chipset and supports a low-power SDIO 3.0 interface for WLAN and a UART/PCM interface for Bluetooth. The module operates over a supply of 3.3 V while consuming up to 3.83 W of power.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-constellation GNSS Receiver Module with Integrated Antenna

GNSS Module from Telit Communications

The Jupiter SE878K3-A is a plug-and-play multi-constellation GNSS receiver that supports GPS, QZSS, GLONASS, Beidou and is Galileo ready. The module consists of an integrated high sensitivity patch antenna (17 x 17 x 4 mm), SAW filter, additional LNA, flash memory, GNSS core, RTC and TCXO.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events and more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]